
1 / 8 · Click to enlarge
AI Summary
The M5Stack GoPlus2 is a stackable motor and servo driver module with an STM32F0, dual DC motor ports, four servo outputs, and three PORT-B expansions. Its built-in 500mAh battery and IR make it a compact motion-control add-on for M5Stack projects.
Key Highlights
- Dual DC motor ports with HR8833 H-bridge driver
- Four servo outputs for precise position control
- Three PORT-B interfaces for analog/digital expansion
- STM32F030C8T6 microcontroller handles control logic
- Built-in 500mAh lithium battery for untethered use
- Infrared transmit and receive for remote control
Ideal For
- M5Stack users adding motor control to IoT projects
- Robotics hobbyists building small differential-drive robots
- Makers creating servo-driven mechanisms or animatronics
- Educators teaching motor control and embedded systems
- DIY enthusiasts building IR-controlled toys
Buying Tip
Remember that the built-in 500mAh battery is best for light loads; for driving multiple servos or motors continuously, plan to use the DC jack with an external power supply.
Elecvora expert review
Our verdict
The M5Stack GoPlus2 is a well-integrated motion-control module that saves wiring time and adds significant capability to M5Stack projects. Its dedicated STM32F0 and multiple interfaces make it a practical choice for robotics and automation.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Integrated dual DC motor and four servo drivers
- Three configurable PORT-B expansions
- Built-in battery and IR for standalone use
- Stackable design requires no extra wiring
Cons
- Requires an M5Stack host board (not included)
- Limited battery capacity for heavy loads
- External power supply often needed for multiple servos
Best for
M5Stack users building motorized robots or servo-driven mechanisms
Not ideal for
Projects requiring high-power motor control beyond the HR8833 rating
Specifications
| Item Type | M5 Stack |
|---|---|
| Motor driver chip | HR8833 H-bridge drive |
| Expand Interface | DC Motor x 2 PORT-B x 3 Servo x 4 |
| Batteries Required | Lithium Battery 500mAH |
| Length (mm) | 54 |
| Width (mm) | 54 |
| Weight (g) | 38 |
| Shipping Weight | 0.6 kg |
| Shipping Dimensions | 10 × 7 × 3 cm |
What's in the box
- 1x GoPlus2 Module
- 2x DC Motor Cable
Frequently Asked Questions
Do I need a separate M5Stack controller to use the GoPlus2?
Can I power the GoPlus2 without an external supply?
What motors and servos are compatible?
How do I charge the built-in battery?
What is included in the package?
Can I use the PORT-B interfaces for analog sensors?
Overview
The M5Stack GoPlus2 is a stackable module that brings motor and servo control to your M5Stack development board. At its core is an STM32F030C8T6 microcontroller, which manages the HR8833 H-bridge driver to operate two DC motors and four servos. The module also features three PORT-B expansion interfaces, each configurable for analog input, digital output, or digital input, giving you flexible signal acquisition and control options. A built-in 500mAh lithium battery allows the module to run without an external power source, and infrared transmit and receive capabilities enable remote-control applications. For projects that need more power, a dedicated DC power jack accepts an external supply.
Key Features
- Dual DC motor drive: Two motor ports with HR8833 H-bridge for bidirectional control.
- Four servo channels: Connect up to four servos for precise angular positioning.
- Three PORT-B expansions: Each port can be used as analog input, digital output, or digital input.
- STM32F030C8T6 MCU: Dedicated microcontroller handles motor and servo timing.
- Built-in 500mAh battery: Powers the module for standalone operation.
- Infrared TX/RX: Send and receive IR signals for remote control or communication.
- External DC jack: Connect an external power supply when driving multiple actuators.
Specifications Explained
The HR8833 H-bridge is the component that lets you reverse motor direction and control speed via PWM. Two DC motor ports mean you can build a differential-drive robot or control two separate mechanisms. The four servo outputs are ideal for robotic arms, pan-tilt systems, or walking robots. The three PORT-B interfaces are versatile: use them to read sensors (analog input), trigger relays or LEDs (digital output), or monitor switches (digital input). The STM32F030C8T6 offloads motor control from your main M5Stack controller, ensuring smooth motion. The 500mAh battery provides enough energy for short untethered runs, and the DC jack lets you connect a higher-capacity external battery or power supply for extended use. Infrared capability adds a wireless control dimension without extra hardware.
Compatibility and Requirements
The GoPlus2 is designed to stack with M5Stack development boards. It requires a compatible M5Stack host (sold separately) to program and control via the stackable interface. The built-in 500mAh lithium battery can be charged through the M5Core using a USB-C connection. For powering multiple servos or motors simultaneously, an external DC power supply connected to the onboard jack is recommended. No additional drivers are needed beyond the M5Stack software environment.
Typical Uses
- Building small robots with differential steering or mecanum wheels.
- Controlling robotic arms or pan-tilt camera mounts with servos.
- Adding motion to DIY toys and automated props.
- Creating infrared remote-controlled vehicles or devices.
- Acquiring analog/digital signals from sensors in IoT projects.
What's in the Box
- 1x GoPlus2 Module
- 2x DC Motor Cable
Quick specs
- Item Type
- M5 Stack
- Motor driver chip
- HR8833 H-bridge drive
- Expand Interface
- DC Motor x 2 PORT-B x 3 Servo x 4
- Batteries Required
- Lithium Battery 500mAH
- Length (mm)
- 54
- Width (mm)
- 54



















