Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A 13.56 MHz RFID reader and writer unit based on the WS1850S chip that talks to your project over I2C at address 0x28. It reads and writes ISO14443A, MIFARE and NTAG cards, making contactless identification easy to add to M5STACK builds.

Key Highlights

  • WS1850S chip operating at 13.56 MHz for contactless card interaction
  • I2C interface at address 0x28 with fast mode up to 400 Kbit/s
  • Reads and writes ISO14443A, MIFARE and NTAG cards
  • Supports ISO/IEC 14443 Type A and Type B protocols
  • 64-byte transceiver buffer for card data exchanges
  • Rated for -20 to 85 °C operating temperatures

Ideal For

  • Makers building access control prototypes with M5STACK boards
  • Engineers adding contactless check-in to a kiosk project
  • Warehouse and inventory tinkerers logging goods movements
  • Developers encoding or authorising MIFARE and NTAG cards
  • Students learning I2C RFID integration hands-on

Buying Tip

Confirm your host board has a free I2C port and that your existing cards are 13.56 MHz ISO14443A, MIFARE or NTAG before ordering, since 125 kHz cards will not work with this unit.

Elecvora expert review

Our verdict

A tidy, well-scoped RFID module that removes the RF design work from card-reading projects. It suits M5STACK users who want reliable 13.56 MHz read and write over a simple I2C link rather than a long-range reader.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Simple I2C wiring at a fixed address
  • Supports reading, writing and encoding tasks
  • Broad 13.56 MHz card protocol coverage
  • Wide -20 to 85 °C operating range
  • Cable included for immediate hookup

Cons

  • Requires host-side firmware support for the WS1850S
  • Only 13.56 MHz cards work; 125 kHz tags are not supported
  • Read range is short, as expected for contactless proximity cards

Best for

M5STACK makers adding contactless card reading and writing to a project

Not ideal for

Users needing long-range UHF reading or 125 kHz low-frequency tags

Specifications

I2CData rate: Fast mode-up to 400 Kbit/s; High-speed mode-up to 3400 Kbit/s
Transceiver64 bytes (buffer)
Supported protocolsISO14443A, MIFARE, and NTAG, ISO/IEC 14443 Type A/Type B protocol
Operating Temperature (°C)-20℃ ~ 85℃
Communication ProtocolI2C: 0x28
Shipping Weight0.011 kg
Shipping Dimensions14 × 9 × 1 cm

What's in the box

  • 1 x RFID Unit
  • 1 x HY2.0-4P cable

Frequently Asked Questions

Which cards does this RFID unit support?
It supports ISO14443A, MIFARE and NTAG cards, along with the ISO/IEC 14443 Type A and Type B protocols. Cards must operate at 13.56 MHz.
How does the unit connect to my board?
It connects over I2C at address 0x28 using the included HY2.0-4P cable. Your host needs a free I2C port and firmware that supports the WS1850S.
Can it write data to cards, or only read them?
It handles both reading and writing, plus recognition and encoding tasks. Writing depends on the card type and whether the card's memory is writable.
What is included in the package?
The package contains one RFID Unit and one HY2.0-4P cable. A host board and cards are not included.
What temperature range can it operate in?
The rated operating range is -20 °C to 85 °C. Keep it away from moisture and condensation, especially in cooler installations.
How should I care for the unit?
Handle it by the board edges, avoid flexing the cable, and keep metal objects away from the antenna area. Store it in a dry place when not in use.

Overview

The M5STACK RFID 2 Unit is a contactless RFID reader and writer module built on the WS1850S chip and tuned for 13.56 MHz operation. It gives your project a straightforward way to detect, read and write compatible RF cards and tags using magnetic field induction, so no physical contact is needed between the card and the reader.

Communication with a host board happens over I2C at address 0x28. That keeps wiring simple and leaves plenty of GPIO free for displays, sensors and other peripherals in the same build.

Key Features

  • WS1850S transceiver: a dedicated 13.56 MHz RFID front end handles the card-side radio work.
  • I2C interface: fixed address 0x28, with fast mode up to 400 Kbit/s and high-speed mode up to 3400 Kbit/s.
  • Broad card support: ISO14443A, MIFARE and NTAG cards, plus ISO/IEC 14443 Type A and Type B protocols.
  • Read and write: supports card reading, writing, recognition, recording and encoding tasks.
  • 64-byte buffer: onboard transceiver buffering for card data exchanges.
  • Wide operating range: rated from -20 °C to 85 °C.

Specifications Explained

13.56 MHz operating frequency

This is the high-frequency RFID band used by many access badges, transit-style cards and NFC tags. If your cards are specified for 13.56 MHz ISO14443 operation, they fall within the range this unit is designed for.

I2C at address 0x28

The fixed I2C address means the unit occupies one address on your bus. Fast mode reaches 400 Kbit/s, and high-speed mode reaches 3400 Kbit/s, so card data moves quickly between the module and your controller.

64-byte transceiver buffer

The buffer holds card data during a transaction. It is a working area for the exchange rather than long-term storage, so plan to move card data into your own application memory.

Temperature range

Operation from -20 °C to 85 °C covers typical indoor enclosures, workshops and sheltered outdoor cabinets. Avoid condensation and direct water exposure.

Compatibility and Requirements

The unit connects over I2C and is intended for M5STACK host boards that expose an I2C port and support the HY2.0-4P connection style. You will need a compatible host, the supplied cable, and cards or tags that match the supported protocols: ISO14443A, MIFARE, NTAG and ISO/IEC 14443 Type A/Type B. Firmware support for the WS1850S is required on the host side.

Typical Uses

  • Access control prototypes that check badge identity
  • Check-in and attendance stations
  • Warehouse goods entry and storage logging
  • Community or site vehicle entry and exit registration
  • Encoding and authorising RF cards for a small system

What's in the Box

  • 1 x RFID Unit
  • 1 x HY2.0-4P cable

Quick specs

I2C
Data rate: Fast mode-up to 400 Kbit/s; High-speed mode-up to 3400 Kbit/s
Transceiver
64 bytes (buffer)
Supported protocols
ISO14443A, MIFARE, and NTAG, ISO/IEC 14443 Type A/Type B protocol
Operating Temperature (°C)
-20℃ ~ 85℃
Communication Protocol
I2C: 0x28
Shipping Weight
0.011 kg
See all specifications