
1 / 3 · Click to enlarge
AI Summary
A compact optical sensor module that measures heart rate and pulse oximetry using red and infrared LEDs with an I2C interface. It provides a complete integrated solution for wearable and medical monitoring prototypes.
Key Highlights
- Integrated red and IR LEDs with photodetector for pulse oximetry
- I2C interface plus programmable INT pin for easy MCU connection
- 3.3V power supply with ultra-low power operation
- High SNR and ambient light cancellation for robust readings
- Compact 19 mm × 14.5 mm board weighs only 2 grams
- Fast data output capability for real-time monitoring
Ideal For
- Makers building wearable health trackers
- Students learning about optical biosensors
- Engineers prototyping medical monitoring devices
- Fitness gadget developers needing heart-rate data
- Researchers exploring pulse oximetry applications
Buying Tip
Remember to order a Berg pin connector or header separately, as it is not included with the module.
Elecvora expert review
Our verdict
The MAX30100 module offers a compact, integrated solution for adding pulse oximetry and heart-rate sensing to prototypes. It is well-suited for developers who need a straightforward I2C sensor and are prepared to handle its sensitivity to motion and pressure.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Integrated LEDs and photodetector simplify design
- I2C interface with interrupt pin
- Ultra-low power for battery-powered devices
- High SNR and ambient light cancellation
Cons
- No pin connector included, requires soldering
- Readings can be affected by motion and temperature
- Excessive finger pressure can reduce reliability
Best for
Wearable and medical monitoring prototypes
Not ideal for
Applications requiring clinical-grade accuracy without calibration
Specifications
| Item Type | Sensor |
|---|---|
| Model No. / Name | Heart Rate Sensor, Pulse Oximeter |
| Color | Green |
| Length (mm) | 19 |
| Width (mm) | 14.5 |
| Weight (g) | 2 |
| Shipping Weight | 0.005 kg |
| Shipping Dimensions | 8 × 6 × 4 cm |
What's in the box
- 1 x MAX30100 Pulse Oximeter Heart Rate Sensor Module
Frequently Asked Questions
What is the power supply voltage for this module?
Does the module come with a pin header?
Can I use this sensor with a 5V microcontroller?
What factors can affect the accuracy of readings?
Is a library available for this sensor?
How do I clean the sensor?
Overview
The MAX30100 Pulse Oximeter Heart Rate Sensor Module is an optical sensing solution that combines two LEDs, a photodetector, and a low-noise analog front end on a single small board. It measures the absorbance of pulsing blood through the tip of a finger, allowing developers to derive heart rate and pulse oximetry data. The module is designed for integration into medical monitoring devices, fitness assistants, and wearable gadgets where size and power consumption matter.
Key Features
- Complete optical sensor: red and infrared LEDs paired with a photodetector for blood absorbance measurement.
- I2C interface: simple two-wire communication with a programmable interrupt pin for event-driven designs.
- 3.3V operation: ultra-low power consumption helps extend battery life in portable devices.
- Advanced signal processing: integrated ambient light cancellation and high signal-to-noise ratio support reliable readings even with motion artifacts.
- Compact footprint: measures 19 mm by 14.5 mm and weighs just 2 grams, ideal for space-constrained enclosures.
Specifications Explained
Optical sensing: The red and IR LEDs emit light at wavelengths optimised for reading through a fingertip. The photodetector captures the transmitted light, and the analog front end converts it into a digital signal for the MCU.
I2C and INT pin: The I2C bus handles configuration and data transfer, while the interrupt pin can signal the host when new data is ready, reducing polling overhead.
Power: A 3.3V supply is required. The ultra-low power design is suitable for battery-powered wearables.
Sample rate: The module supports high sample rates for fast data output, enabling real-time monitoring applications.
Compatibility and Requirements
The module communicates via I2C and requires a 3.3V power source. It is intended for use with microcontrollers that support I2C and can process the sensor data. Note that the module does not include a Berg pin connector; you will need to source and solder your own header or wires for connection. Developers should be aware that readings can be negatively impacted by excess motion and temperature changes, and that too much pressure on the finger can constrict capillary blood flow and reduce reliability.
Typical Uses
- Medical monitoring device prototypes
- Fitness assistant and activity tracker designs
- Wearable health gadgets
- Educational and research projects involving pulse oximetry
What's in the Box
1 x MAX30100 Pulse Oximeter Heart Rate Sensor Module. No pin connector is included.

Quick specs
- Item Type
- Sensor
- Model No. / Name
- Heart Rate Sensor, Pulse Oximeter
- Color
- Green
- Length (mm)
- 19
- Width (mm)
- 14.5
- Weight (g)
- 2














