Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A compact MAX30205MTA-based module that measures human body temperature digitally over I2C with 16-bit resolution. Its ±0.1°C accuracy in the 37-39°C range makes it a practical choice for wearable and health-monitoring prototypes.

Key Highlights

  • MAX30205MTA digital body temperature sensor IC
  • I2C interface for Arduino, ESP32 and Raspberry Pi projects
  • 16-bit resolution at 0.00390625°C per step
  • ±0.1°C accuracy across the 37°C to 39°C range
  • 2.7V to 3.3V supply with 600µA typical current
  • Open-drain over-temperature interrupt and up to 32 I2C addresses

Ideal For

  • Makers building wearable health-monitoring prototypes
  • Arduino and ESP32 developers adding body temperature sensing
  • Raspberry Pi users logging temperature data over I2C
  • Designers creating over-temperature alert systems
  • Students learning digital sensor integration

Buying Tip

Confirm your host board uses 3.3V I2C logic before connecting, since the module is specified for a 2.7V to 3.3V supply.

Elecvora expert review

Our verdict

A focused, well-specified sensor module for anyone who needs digital body temperature readings in a small embedded build. The narrow accuracy band and 3.3V supply mean it suits targeted health-monitoring work rather than general-purpose temperature sensing.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • ±0.1°C accuracy in the 37-39°C body temperature range
  • 16-bit resolution with fine 0.00390625°C steps
  • I2C interface with up to 32 selectable addresses
  • Low 600µA typical current for battery-powered designs
  • Open-drain over-temperature output for alerts

Cons

  • Quoted accuracy applies only to the 37-39°C window
  • Supply limited to 2.7V-3.3V, so 5V systems need level care
  • Operating range of 0°C to +50°C limits use in extreme environments

Best for

Wearable and health-monitoring prototypes needing accurate body temperature readings

Not ideal for

General-purpose or wide-range environmental temperature measurement

Specifications

Shipping Weight0.005 kg
Shipping Dimensions4 × 4 × 2 cm

What's in the box

  • 1 x MAX30205MTA Human Body Temperature Sensoring Module
  • 1 x Header Pin

Frequently Asked Questions

What interface does this module use?
It communicates over I2C, so it connects to a host microcontroller using SDA and SCL lines along with power and ground.
What supply voltage does it need?
The module is specified for 2.7V to 3.3V DC and draws around 600µA typical. Use it with 3.3V logic systems.
How accurate is the temperature reading?
Accuracy is ±0.1°C across the 37°C to 39°C range. The 16-bit output provides a resolution of 0.00390625°C.
Can I use more than one module at once?
Yes. Up to 32 I2C addresses can be selected, allowing multiple modules on the same bus.
What is included in the package?
You receive one MAX30205MTA Human Body Temperature Sensoring Module and one header pin.
What is the operating temperature range?
The module is specified to operate from 0°C to +50°C.

Overview

The MAX30205MTA Human Body Temperature Sensor Module brings a dedicated digital body temperature sensor to embedded and wearable projects. Instead of an analog probe that needs calibration and careful signal conditioning, this board outputs temperature readings digitally over I2C, so a microcontroller can read them directly. The sensor is specified for ±0.1°C accuracy between 37°C and 39°C, the band where body temperature measurement is most relevant.

The module is small at roughly 21.5 x 13.6 mm and light enough for wearable enclosures. It runs from 2.7V to 3.3V and draws about 600µA typical, which keeps it within reach of small battery-powered designs.

Key Features

  • MAX30205MTA sensor IC for digital body temperature measurement
  • 16-bit resolution at 0.00390625°C per least significant bit
  • I2C communication for straightforward microcontroller integration
  • Configurable over-temperature output on an open-drain interrupt/thermostat pin
  • Selectable I2C addresses, with up to 32 address options for multi-sensor systems
  • Low voltage and low current operation for portable electronics

Specifications Explained

Accuracy of ±0.1°C (37°C–39°C) means readings in the core body temperature range stay within a tenth of a degree of the reference. Outside that band the module still reports temperature, but the quoted accuracy figure applies to that window.

16-bit resolution gives a step size of 0.00390625°C, so small changes are visible in the output rather than being rounded away.

2.7V–3.3V supply and 600µA typical current suit 3.3V logic systems and battery-powered devices. Check that your host board uses 3.3V I2C levels.

Open-drain over-temperature output lets you trigger an interrupt or thermostat action when a set threshold is crossed, without polling the bus constantly.

Up to 32 selectable I2C addresses allows several modules on one bus, useful when monitoring multiple points.

The stated operating temperature range is 0°C to +50°C, and the board measures about 21.5 x 13.6 mm.

Compatibility and Requirements

The I2C interface is intended for integration with Arduino, ESP32, Raspberry Pi and other embedded platforms. You will need a host microcontroller with an I2C bus, a 2.7V–3.3V supply, and pull-up resistors on the bus lines where your host does not already provide them. A header pin is included for wiring.

Typical Uses

  • Wearable body temperature monitoring prototypes
  • Health and medical monitoring device development
  • Continuous temperature logging with a microcontroller
  • Multi-point sensing using several modules on one I2C bus
  • Over-temperature alert systems using the interrupt output

What's in the Box

  • 1 x MAX30205MTA Human Body Temperature Sensoring Module
  • 1 x Header Pin

Quick specs

Shipping Weight
0.005 kg
Shipping Dimensions
4 × 4 × 2 cm
See all specifications