Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

The Meco 27-Auto is a compact auto-ranging clamp meter with a 25 mm jaw for AC current up to 400 A, plus AC voltage and resistance measurement. True RMS, data hold, and audible continuity make it a practical troubleshooting tool.

Key Highlights

  • Auto-ranging AC current measurement up to 400 A
  • True RMS readings for non-sinusoidal waveforms
  • 25 mm jaw opening for conductors in tight spaces
  • 2000-count 3-1/2 digit LCD with backlight
  • Data hold, audible continuity, and diode test
  • Auto power-off helps extend battery life

Ideal For

  • Electricians performing routine maintenance and troubleshooting
  • HVAC technicians checking current draw on motors and compressors
  • DIY homeowners verifying circuits and outlets
  • Electronics hobbyists needing a clamp meter for AC current
  • Appliance repair technicians diagnosing load issues

Buying Tip

Confirm that the 25 mm jaw opening fits the conductors you plan to measure, and remember to order two AAA batteries separately if they are not included.

Elecvora expert review

Our verdict

The Meco 27-Auto is a sensible choice for users who need a straightforward auto-ranging clamp meter with true RMS and a useful set of extra functions. It covers common AC current, voltage, and resistance checks without unnecessary complexity.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Auto-ranging simplifies operation across functions
  • True RMS improves accuracy on distorted waveforms
  • Data hold and backlight add everyday convenience
  • Audible continuity and diode test cover basic diagnostics

Cons

  • Batteries may not be included, so check before first use
  • No PC connectivity or advanced logging features
  • Jaw opening of 25 mm limits use on large busbars

Best for

Electricians and technicians needing a compact auto-ranging clamp meter for AC current and basic electrical checks

Not ideal for

Users requiring data logging, PC connectivity, or very large conductor measurement

Specifications

Item TypeClampmeter
Model No. / NameDigital Clampmeter
PolarityAutomatic, positive implied, negative polarity indication.
Measurement Range3 times per second, nominal.
Operating Temperature (°C)0°C to 50°C at < 70% relative humidity.
Storage Capacity-20°C to 60°C, 0 to 80% R.H. with the battery removed from the meter.
AccuracyStated accuracy at 270C ± 50C,<75% relative humidity
Power RatingTwo 1.5V ‘AAA’ Size Battery
Batteries Requiredlife 200 hours typical
Jaw Opening (mm)25
AC Current(A)2A, 20A, 200A, 400A (auto ranging)
AC Input Voltage (V)2V, 20V, 200V, 600V (auto ranging)
Resistance200 , 2k , 20K , 200k , 2M , 20M (auto ranging)
Weight (g)170
Shipping Weight0.25 kg
Shipping Dimensions20 × 7 × 3 cm

Frequently Asked Questions

What types of measurements can this clamp meter perform?
It measures AC current up to 400 A, AC voltage up to 600 V, and resistance up to 20 MΩ. It also offers audible continuity and diode test functions.
Does the meter come with batteries?
The product data does not confirm included batteries. It requires two 1.5 V AAA batteries, so please check the package contents or have batteries ready.
What is the maximum conductor size it can clamp?
The jaw opening is 25 mm, so it can clamp around conductors that fit within that opening.
Is it suitable for measuring DC current?
No. The specified current measurement is AC only, with ranges for 2 A, 20 A, 200 A, and 400 A.
How do I care for the meter?
Store it within the stated storage temperature and humidity limits, and remove the batteries if the meter will not be used for an extended period.
Does it have a backlight?
Yes, the LCD has a backlight to help with readings in low-light conditions.

Overview

The Meco 27-Auto Digital Clamp Meter combines a clamp-style AC current sensor with a full-featured digital multimeter in one handheld instrument. It is built for users who need to check current flow without disconnecting wiring, and who also want the convenience of voltage and resistance measurements in the same device. The auto-ranging design removes the need to select a manual range for most measurements, so you can move quickly between tasks.

With a 3-1/2 digit, 2000-count display and true RMS measurement, the meter is suited to everyday electrical work where reliable, readable results matter. The backlit LCD helps in low-light panels, and the data hold function lets you freeze a reading while you reposition the clamp or record the value.

Key Features

  • Auto-ranging measurement: The meter automatically selects the appropriate range for AC current, AC voltage, and resistance, simplifying operation.
  • True RMS: Provides accurate readings on AC signals that are not pure sine waves, such as those from variable-speed drives or electronic loads.
  • 25 mm jaw opening: Clamps around a single conductor to measure AC current without breaking the circuit.
  • Data hold: Freezes the displayed value so you can note it down after removing the clamp from a crowded panel.
  • Audible continuity and diode test: Helps you check for open circuits and verify diode direction quickly.
  • Auto power-off: Turns the meter off after a period of inactivity to conserve battery life.
  • Backlit LCD: Improves visibility when working in dimly lit areas.

Specifications Explained

AC current: Four auto-ranging ranges cover 2 A, 20 A, 200 A, and 400 A. This spans small appliance loads up to feeder and branch circuits, making the meter useful for both low-current diagnostics and higher-load checks.

AC voltage: Ranges of 2 V, 20 V, 200 V, and 600 V let you verify mains presence and check control signals. The 600 V maximum suits common residential and commercial single-phase systems.

Resistance: Six ranges from 200 Ω to 20 MΩ support continuity checks, component testing, and basic fault finding.

Display and sampling: The 2000-count, 3-1/2 digit LCD updates at a nominal rate of 3 times per second, giving responsive readings as you probe.

Environment: Specified for operation from 0°C to 50°C at below 70% relative humidity, with stated accuracy at 27°C ± 5°C and below 75% RH. Storage is rated from -20°C to 60°C with the battery removed.

Power: Two 1.5 V AAA batteries provide typical life of 200 hours. The meter includes auto power-off to help preserve that runtime.

Compatibility and Requirements

The meter requires two 1.5 V AAA batteries (not included unless stated in the box contents). It is a standalone measuring instrument and does not require PC connectivity or additional software. The 25 mm jaw accepts conductors that fit within that opening. Use the meter only within its stated measurement ranges and environmental limits.

Typical Uses

  • Checking AC current draw on appliances and branch circuits
  • Verifying presence of AC voltage at outlets, switches, and panels
  • Continuity testing of cables, fuses, and connections
  • Diode testing in basic electronic repairs
  • Routine electrical maintenance and troubleshooting

What's in the Box

Package contents are not specified for this listing. Please check the box contents section or product packaging for the exact included items.

Quick specs

Item Type
Clampmeter
Model No. / Name
Digital Clampmeter
Polarity
Automatic, positive implied, negative polarity indication.
Measurement Range
3 times per second, nominal.
Operating Temperature (°C)
0°C to 50°C at < 70% relative humidity.
Storage Capacity
-20°C to 60°C, 0 to 80% R.H. with the battery removed from the meter.
See all specifications