Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A Mega-format development board built on the ATmega2560 with a MAX3421e USB host interface for Android accessory projects. It gives you 54 digital I/O pins, 16 analog inputs and four hardware serial ports, and ships with a USB cable.

Key Highlights

  • ATmega2560 chip on a Mega-format development board
  • USB host interface based on the MAX3421e IC for Android phones
  • 54 digital I/O pins, 15 with PWM output
  • 16 analog inputs and four hardware serial ports
  • 5V operating voltage with 7-12V recommended input
  • Includes a USB cable for immediate connection

Ideal For

  • Makers building Android accessory prototypes
  • Students learning multi-pin microcontroller projects
  • Developers needing four hardware serial ports
  • Robotics hobbyists with many sensors and actuators
  • Educators running Arduino-compatible board workshops

Buying Tip

Confirm your project needs the Mega pin count and USB host feature, and use a 7-12V supply rated for the current your phone and attached devices will draw.

Elecvora expert review

Our verdict

A capable Mega-format board whose USB host interface makes Android accessory work practical, backed by generous I/O and serial capacity. It rewards buyers who need those features and understand its current limits.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • ATmega2560 with 54 digital and 16 analog pins
  • USB host interface for Android phone projects
  • Four hardware serial ports
  • Includes a USB cable
  • Revision 3 layout with SDA, SCL and IOREF pins

Cons

  • External supply above 12V may overheat the regulator
  • USB power limits current available to a connected phone
  • Board is unbranded, so documentation comes from the wider Mega ecosystem

Best for

Android accessory prototypes and I/O-heavy microcontroller projects

Not ideal for

Compact low-pin builds or projects needing wireless connectivity out of the box

Specifications

Item TypeDevelopment Board
Board TypeMega
With Cable (Y/N)Y
Chip TypeATmega2560
Operating Voltage (VDC)5V
Input Voltage (V)7-12V
Input Voltage (limit)6-20V
Digital I/O Pins54 (of which 15 provide PWM output)
Analog I/O Pins16
DC Current per I/O Pin (mA)40 mA
DC Current for 3.3V Pin(mA)50 mA
Shipping Weight0.09 kg
Shipping Dimensions10 × 8 × 5 cm

What's in the box

  • Mega R3 Android Accessory Development Kit board
  • USB cable

Frequently Asked Questions

What makes this board different from a standard Mega board?
It adds a USB host interface based on the MAX3421e IC, which allows it to act as a USB host for Android-based phones. The rest of the board follows the Mega format with the ATmega2560.
How should I power the board?
You can power it over USB or with an external AC-to-DC adapter or battery. The board selects the source automatically, and the recommended external range is 7-12V.
How much current can I draw from the pins?
Each I/O pin supports up to 40 mA, and the 3.3V pin supplies up to 50 mA. Plan attached devices so these limits are not exceeded.
Does the package include a cable?
Yes, a USB cable is included with the board.
Can I connect a phone and still power other devices?
With an external supply the regulator can provide up to 1500 mA, split as 750 mA for the phone and board and 750 mA for actuators and sensors. A supply capable of 1.5A is needed for the full amount.
What should I avoid when powering it?
Avoid supplying more than 12V for extended periods, as the voltage regulator may overheat. Below 7V the 5V pin may supply less than five volts and the board may become unstable.

Overview

The Mega R3 Android Accessory Development Kit is a microcontroller board built on the ATmega2560 and designed around the Mega format. Its distinguishing feature is a USB host interface based on the MAX3421e IC, which lets the board communicate with Android-based phones as a USB host. For anyone prototyping Android accessories or projects that need a large number of inputs and outputs, this board provides the pin count and serial capacity to match.

The Revision 3 design adds SDA and SCL pins near the AREF pin, plus an IOREF pin that lets shields adapt to the voltage supplied by the board. A stronger reset circuit and a resistor pulling the 8U2 HWB line to ground make firmware upgrades through DFU mode easier.

Key Features

  • ATmega2560 microcontroller on a Mega-format board
  • USB host interface using the MAX3421e IC for Android phone connections
  • 54 digital I/O pins, of which 15 provide PWM output
  • 16 analog inputs for sensor and measurement work
  • Four UARTs for hardware serial communication
  • 16 MHz crystal oscillator for timing
  • USB connection, power jack, ICSP header and reset button on board
  • USB cable included in the package

Specifications Explained

The board runs at 5V and accepts an input of 7-12V, with an absolute limit of 6-20V. Staying inside the recommended range keeps the on-board regulator within safe operating temperatures. Each I/O pin can source or sink up to 40 mA, and the 3.3V pin supplies up to 50 mA, so plan external loads accordingly.

With 54 digital pins and 16 analog inputs, the board handles projects that combine many sensors, buttons, displays and actuators at once. The 15 PWM-capable pins allow proportional control of motors, LEDs and similar devices, while the four hardware serial ports let you run multiple serial devices without software emulation.

Compatibility and Requirements

The board is intended for Android accessory development through its USB host interface. It can be powered over USB or from an external AC-to-DC adapter or battery; the power source is selected automatically. When powered over USB, a total of 500 mA is available for the phone and board. With an external supply, the regulator can provide up to 1500 mA, with 750 mA shared by the phone and board and 750 mA allocated to attached actuators and sensors; a supply capable of 1.5A is needed to use that full current.

Typical Uses

This board fits Android accessory prototypes, multi-sensor data logging, robotics projects needing many I/O lines, and educational builds where several serial devices run at once. It is also a practical step up for users who have outgrown a smaller board's pin count.

What's in the Box

The package includes the Mega R3 Android Accessory Development Kit board and a USB cable.

Quick specs

Item Type
Development Board
Board Type
Mega
With Cable (Y/N)
Y
Chip Type
ATmega2560
Operating Voltage (VDC)
5V
Input Voltage (V)
7-12V
See all specifications