Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A compact 80 m laser distance module delivering ±2 mm accuracy with a USB to TTL interface. It runs on 3.3 V at under 60 mA, making it easy to integrate into robotics, automation and measurement projects.

Key Highlights

  • Measures 0.03 m to 80 m with ±2 mm accuracy
  • USB to TTL interface for microcontrollers, PCs and embedded systems
  • Selectable 3 Hz, 10 Hz and 20 Hz measurement frequency
  • Low current draw under 60 mA at 3.3 V
  • Class II red laser, 620-690 nm, under 1 mW
  • Compact 47 x 25 mm module weighing 15 g

Ideal For

  • Robotics engineers integrating distance sensing into mobile platforms
  • Industrial automation teams needing millimetre-level measurement
  • Makers and hobbyists building microcontroller-based measurement projects
  • Logistics and warehouse technicians measuring spaces and loads
  • Embedded systems developers prototyping with USB to TTL sensors

Buying Tip

Confirm that your host board or PC setup can supply a stable 3.3 V rail and accept TTL serial data before wiring the module in.

Elecvora expert review

Our verdict

The LDK-80 packs an 80 m range and ±2 mm accuracy into a 15 g module with a USB to TTL interface, which makes it a practical building block for automation and robotics projects. Its low 3.3 V power draw and selectable frequency modes add flexibility without adding bulk.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Long 80 m range in a very small 47 x 25 mm package
  • ±2 mm accuracy suits precision measurement tasks
  • USB to TTL interface simplifies host integration
  • Low current draw under 60 mA at 3.3 V
  • Selectable 3 Hz, 10 Hz and 20 Hz modes

Cons

  • Operating temperature limited to 0 °C to 40 °C
  • Requires a stable 3.3 V supply and TTL-capable host
  • Only the sensor module is included, no cables or accessories listed

Best for

Engineers and makers needing compact, accurate laser distance sensing

Not ideal for

Freezing or high-heat outdoor installations outside 0-40 °C

Specifications

Model No. / NameLDK 80
Accuracy±2mm
Item TypeLaser Range Sensor
Length (mm)47
Weight (g)15
Distance Measuring Range(M)0.03 to 80
Width (mm)25
Laser classClass II
Frequency3Hz / 10Hz / 20Hz
Current consumption<60mA @ 3.3V
Operating Temperature (°C)0°C to 40°C
Laser Type620–690nm, <1mW
Shipping Weight0.018 kg
Shipping Dimensions12 × 8 × 2 cm

What's in the box

  • 1 x Meskernel LDK-80 Small Laser Range Sensor (80m) USB to TTL

Frequently Asked Questions

What distance range does the LDK-80 measure?
It measures from 0.03 m up to 80 m, with an accuracy of ±2 mm.
How does the sensor connect to a controller?
It uses a USB to TTL interface, allowing connection to microcontrollers, PCs and embedded systems.
What power supply does it need?
The module operates at 3.3 V and draws under 60 mA.
Can I change the measurement speed?
Yes. It supports 3 Hz, 10 Hz and 20 Hz frequency modes.
What is included with the sensor?
The package contains 1 x Meskernel LDK-80 Small Laser Range Sensor (80m) USB to TTL.
What temperature range is supported?
The sensor is rated for operation from 0 °C to 40 °C.

Overview

The Meskernel LDK-80 is a small laser range sensor built for projects that need dependable distance readings at millimetre resolution. It covers a measuring range from 0.03 m to 80 m and maintains an accuracy of ±2 mm, so it suits tasks where a rough estimate is not enough. The sensing element is a Class II red laser operating at 620-690 nm with an output below 1 mW.

Because the module exposes a USB to TTL interface, it can talk to microcontrollers, computers and embedded systems without a complex wiring setup. At 47 mm long, 25 mm wide and only 15 g, it fits into housings and moving assemblies where larger instruments would be awkward.

Key Features

  • Wide 0.03-80 m measuring range with ±2 mm accuracy
  • USB to TTL interface for straightforward data transmission
  • Three selectable frequency modes: 3 Hz, 10 Hz and 20 Hz
  • Low power demand: under 60 mA at 3.3 V
  • Class II laser rated 620-690 nm and under 1 mW
  • Compact 47 x 25 mm form factor at 15 g

Specifications Explained

Range and accuracy: The 0.03 m minimum means the sensor works at close quarters as well as at long distances, while the 80 m ceiling supports outdoor and large-space measurement. The ±2 mm figure describes the precision you can expect from readings.

Frequency modes: Choosing 3 Hz, 10 Hz or 20 Hz lets you trade measurement speed against your data needs. Higher rates suit fast-moving targets; lower rates are fine for static or slow measurements.

Power: With current consumption under 60 mA at 3.3 V, the module is friendly to battery-powered and embedded designs.

Laser class: The Class II, sub-1 mW emitter is a low-power visible red laser, which keeps the module practical for repeated measurement work.

Compatibility and Requirements

The LDK-80 connects over USB to TTL, so it pairs with microcontrollers, PCs and embedded systems that accept TTL serial data. It requires a 3.3 V supply and should be operated between 0 °C and 40 °C. No other accessories are specified in the product data.

Typical Uses

Typical applications include industrial automation, robotics, logistics measurement and smart measurement systems where a compact sensor must report distance to a host controller. Engineers and makers can also use it for bench testing and prototype builds.

What's in the Box

  • 1 x Meskernel LDK-80 Small Laser Range Sensor (80m) USB to TTL

Quick specs

Model No. / Name
LDK 80
Accuracy
±2mm
Item Type
Laser Range Sensor
Length (mm)
47
Weight (g)
15
Distance Measuring Range(M)
0.03 to 80
See all specifications