Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

The MGR-1 A4810 is a 10A solid state relay for switching 24-480VAC loads with a 70-280VAC control signal. Its photo-coupled, no-moving-parts design reduces EMI and supports long, reliable service in control panels.

Key Highlights

  • 10A output current for single-phase AC loads
  • Wide 24-480VAC output voltage range
  • 70-280VAC control input for direct AC signalling
  • Optical isolation and photo-coupled design
  • No moving parts for reduced wear and EMI
  • Compact 56 x 44mm black housing, 89g

Ideal For

  • Industrial automation technicians building control panels
  • System integrators switching AC loads up to 10A
  • Maintenance engineers replacing worn electromechanical relays
  • Electrical contractors working on 24-480VAC control circuits

Buying Tip

Check that your load current stays below 10A and your control signal is between 70VAC and 280VAC before ordering this relay.

Elecvora expert review

Our verdict

The MGR-1 A4810 is a practical compact SSR for 24-480VAC switching at up to 10A with a 70-280VAC control input. Its optical isolation and no-moving-parts construction make it a sensible choice for repetitive AC switching in control panels.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Wide 24-480VAC output range
  • 10A rating suits many moderate AC loads
  • Optical isolation and photo-coupled design
  • No moving parts reduces wear and EMI
  • Compact 56 x 44mm body

Cons

  • Control input requires 70-280VAC, so low-voltage DC control is not supported
  • No heatsink or mounting hardware included
  • Load current must stay within 10A

Best for

Panel builders switching AC loads up to 10A with an AC control signal

Not ideal for

Applications needing DC control input or loads above 10A

Specifications

Model No. / NameMGR-1 A4810
Output Voltage24-480VAC
Current (A)10
ColorBlack
Length (mm)56
Width (mm)44
Weight (g)89
Shipping Weight0.001 kg
Shipping Dimensions1 × 1 × 1 cm

What's in the box

  • 1 x MGR-1 A4810 24-480V Solid State Relay

Frequently Asked Questions

What voltage does the control input need?
The control input requires an AC voltage between 70VAC and 280VAC. A signal outside this range may not operate the relay reliably.
Can this relay switch DC loads?
No. The MGR-1 A4810 is specified for AC output voltages from 24VAC to 480VAC, not DC loads.
What is the maximum load current?
The relay is rated for 10A output current. Keep the load current below this value, including any inrush current.
What is included with the relay?
The package includes one MGR-1 A4810 24-480V Solid State Relay. Mounting hardware and wiring are not included.
Does it need a heatsink?
No heatsink is listed in the package contents. If your installation requires one, select it based on your load and enclosure conditions.
What are the operating temperature limits?
The relay is specified to operate between -20°C and 85°C ambient temperature.

Overview

The MGR-1 A4810 is a single-phase solid state relay designed to switch AC loads using a separate AC control signal. It handles output voltages from 24VAC to 480VAC at up to 10A, and accepts a control voltage of 70-280VAC. Inside, the relay uses photo-coupling with optical isolation, so the control side is separated from the load side. With no moving contacts, it avoids the arcing and mechanical wear associated with electromechanical relays, and it produces less electromagnetic interference. The black housing measures 56mm long and 44mm wide and weighs 89g, which keeps panel space requirements modest.

Key Features

  • 10A switching capacity: suitable for moderate AC loads within the rated range.
  • 24-480VAC output: covers common industrial and commercial AC supply levels.
  • 70-280VAC control input: allows direct control from an AC signal source.
  • Optical isolation: separates control and load circuits for safer switching.
  • Photo-coupled SSR: no moving parts, reducing mechanical wear and contact noise.
  • Reduced EMI: quieter electrical operation than contact-based relays.
  • Compact dimensions: 56 x 44mm body fits into tight panel layouts.

Specifications Explained

Output voltage (24-480VAC): This is the range of AC load voltages the relay is intended to switch. Confirm your load voltage falls inside this window before wiring.

Current rating (10A): The relay is rated for up to 10A of load current. Loads that draw more than this, including high inrush currents, are outside the relay's rating.

Control voltage (70-280VAC): The control signal must be an AC voltage within this range. A signal below 70VAC may not reliably operate the relay.

Optical isolation: The control and output sides are isolated optically, which helps protect the control circuit from the load side.

Operating temperature (-20°C to 85°C): The relay is specified to operate across this ambient temperature range.

Compatibility and Requirements

Use the MGR-1 A4810 only with single-phase AC loads whose voltage is between 24VAC and 480VAC and whose current does not exceed 10A. The control input requires an AC signal between 70VAC and 280VAC. The relay does not include mounting hardware, wiring, or a heatsink in the listed contents, so plan your panel installation accordingly.

Typical Uses

  • Industrial automation and control panels
  • Switching AC heating elements within the rated current
  • Lighting control circuits
  • On/off control of AC motors and solenoids within rating
  • Repetitive switching tasks where contact wear is a concern

What's in the Box

1 x MGR-1 A4810 24-480V Solid State Relay.

Quick specs

Model No. / Name
MGR-1 A4810
Output Voltage
24-480VAC
Current (A)
10
Color
Black
Length (mm)
56
Width (mm)
44
See all specifications