Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A compact solid state relay module that switches 24-480 VAC loads from a 3-32 VDC control signal. Photo-coupled optical isolation and no moving parts give quiet, long-life operation.

Key Highlights

  • 3-32 VDC control input compatible with logic and PLC signals
  • Switches AC loads from 24 VAC up to 480 VAC
  • Photo-coupled optical isolation for safe, noise-free switching
  • No moving parts for silent operation and long service life
  • Compact 56 x 44 mm black housing weighs only 89 g
  • Reduced electromagnetic interference for sensitive environments

Ideal For

  • Automation engineers building control panels
  • PLC integrators needing DC-to-AC switching
  • Electronics hobbyists interfacing microcontrollers with AC loads
  • Maintenance technicians replacing mechanical relays
  • Small-scale industrial equipment builders

Buying Tip

Check that your control signal is within 3-32 VDC and your load voltage is between 24 and 480 VAC before ordering, and consider the load current rating for your application.

Elecvora expert review

Our verdict

The MGR-1 D4810 is a straightforward, compact solid state relay that does one job well: switching AC loads from a DC control signal. Its wide voltage ranges and optical isolation make it a versatile component for automation and hobby projects alike.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Wide 3-32 VDC control range suits many logic and PLC outputs
  • Broad 24-480 VAC output covers common AC load voltages
  • No moving parts means silent operation and long life
  • Optical isolation reduces noise and improves safety
  • Compact and lightweight for tight installations

Cons

  • Single-phase only, not suitable for three-phase loads
  • No mounting hardware or heatsink included
  • Requires knowledge of AC wiring and safety precautions

Best for

Panel builders and hobbyists needing reliable DC-controlled AC switching

Not ideal for

High-power or three-phase industrial load switching

Specifications

Model No. / NameMGR-1 D4810
Output Voltage24-480VAC
ColorBlack
Length (mm)56
Width (mm)44
Weight (g)89
Shipping Weight0.094 kg
Shipping Dimensions6 × 5 × 4 cm

What's in the box

  • 1 x MGR-1 D4810 DC to AC Solid State Relay Module 3-32 VDC / 24-480 VAC

Frequently Asked Questions

What control voltage does the MGR-1 D4810 require?
It requires a DC control signal between 3 VDC and 32 VDC. This range covers common 5 V, 12 V, and 24 V control systems.
What AC load voltages can it switch?
The output side is rated for AC voltages from 24 VAC to 480 VAC. Ensure your load voltage falls within this range.
Is this relay suitable for three-phase loads?
No, it is a single-phase solid state relay. For three-phase loads, you would need a different configuration or multiple relays.
Does it require a heatsink?
The product data does not specify a heatsink requirement. For higher load currents, consider thermal management based on your application.
What is included in the package?
The package includes one MGR-1 D4810 DC to AC solid state relay module. No other accessories are listed.
How should I care for the module?
Keep it in a dry environment, avoid exceeding the rated voltages, and ensure adequate ventilation. No moving parts means minimal maintenance is required.

Overview

The MGR-1 D4810 is a single-phase solid state relay module designed to bridge low-voltage DC control electronics and higher-voltage AC loads. A control signal between 3 VDC and 32 VDC activates the relay, which then switches an AC output spanning 24 VAC to 480 VAC. This makes it a practical interface between microcontrollers, PLCs, or sensors and real-world AC equipment such as heaters, lamps, and small motors.

Unlike electromechanical relays, this module has no moving contacts. Switching is performed with photo-coupled optical isolation, so the control side is electrically separated from the load side. The result is silent operation, reduced electromagnetic interference, and no contact arcing or mechanical wear to shorten service life.

Key Features

  • Wide control range: Accepts 3-32 VDC, covering common 5 V, 12 V, and 24 V control systems.
  • Broad AC output: Switches loads from 24 VAC to 480 VAC.
  • Optical isolation: Photo-coupled design keeps control and load circuits separated.
  • No moving parts: Silent switching with no contact bounce or wear.
  • Compact footprint: 56 mm length and 44 mm width suit tight enclosures.
  • Lightweight: Just 89 g, with a shipping weight of 0.094 kg.

Specifications Explained

Control voltage (3-32 VDC): This is the signal voltage required to turn the relay on. It is deliberately wide so the module can be driven directly by 5 V logic, 12 V control systems, or 24 V industrial outputs without extra level shifting.

Output voltage (24-480 VAC): The load side is rated for AC voltages from 24 V up to 480 V. Always confirm your load voltage falls within this window before connecting.

Dimensions and weight: At 56 mm long, 44 mm wide, and 89 g, the module is small enough for compact control panels and lightweight enough for handheld or embedded projects.

Optical isolation and photo-coupling: The control signal drives an LED that optically triggers the output stage. This arrangement provides electrical separation and helps suppress noise and interference.

Compatibility and Requirements

The MGR-1 D4810 requires a DC control signal in the 3-32 VDC range and an AC load within 24-480 VAC. It is a single-phase device. Ensure your control source can supply the required input current and that your load does not exceed the relay's switching capability. The module is intended for panel or enclosure mounting; no additional mounting hardware is specified.

Typical Uses

  • Switching AC heaters and heating elements from PLC outputs
  • Controlling industrial lamps and lighting circuits
  • On/off control of small AC motors and pumps
  • Automation panels requiring silent, wear-free switching
  • DIY and educational projects interfacing DC controls with AC loads

What's in the Box

Package includes one MGR-1 D4810 DC to AC solid state relay module (3-32 VDC / 24-480 VAC).

Quick specs

Model No. / Name
MGR-1 D4810
Output Voltage
24-480VAC
Color
Black
Length (mm)
56
Width (mm)
44
Weight (g)
89
See all specifications