
1 / 10 · Click to enlarge
At a glance
Made by MHP30, this test & measuring module is a good fit for makers, students and electronics hobbyists.
Key Highlights
- Small and easy to carry or mount
Ideal For
- Arduino, ESP32 and Raspberry Pi projects
- School and college lab work
- Prototypes and test rigs
Buying Tip
Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.
Overview
The MHP30 PD65W Mini Hot Plate Digital Soldering Preheating Rework Station PCB SMD Board Soldering Plate Heating Table, made by MHP30, is listed in our test & measuring module range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.
Before you order
Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.
Specification:
Input Interface: Type-C
Power Supply: PD 65W, 20V 3.25A (PD65W recommended)
Temperature Range: 0°C to 350°C (minimum temperature is ambient temperature, can only be raised but not lowered)
Shell: High-quality 3D printing shell with no visible layering
Product Size: Length: 5.6cm, Width: 5.6cm, Height: 3.5cm
Features:
1. Ultra-Mini Design: This soldering preheating rework station boasts an ultra-compact size, making it highly portable and convenient for a variety of soldering tasks.
2. Efficient Heating: The device is designed to eliminate redundancy and maximize the effective heating area, resulting in reduced energy consumption and faster heating times. It efficiently heats up the designated area, saving both time and energy.
3. Precision Temperature Control: With a wide temperature range of 0°C to 350°C, users can precisely control the heating temperature to suit their soldering needs. The screen display provides clear temperature feedback.
4. Component Protection: The station concentrates preheating on the operating parts, reducing the risk of damage to nearby components during soldering or rework tasks. This ensures the safety of sensitive electronic components.
5. Fast Heating: Equipped with a USB Type-C interface and PD protocol, this preheating station offers faster and more efficient heating, enhancing productivity and workflow efficiency.
Operating instructions: -Double button simultaneous pressing: heating or stopping heating -Double key long press to enter the menu interface or exit -Double key press to confirm Attention: It is recommended that the temperature not exceed 250 ℃ Common problem: Q: How many volts does the power supply require? Answer: A charger that supports the PD protocol with a voltage of 20V 3.25A is required, and theoretically it can support the PD protocol with a voltage of 20V Q: Why does the heating start with a black screen and restart? Answer: This issue triggered the charger protection and requires replacement with another charger or data cable, most of which caused the charger model to be recorded
Package Include:
1x Heating Table










Cheaper Alternatives

Geekcreit? ESP32 ESP32S 18650 Battery Charge Shield V3 Micro USB Type-A USB 0.5A
3Pcs Geekcreit® 0.28 Inch Yellow LED 2.6V-30V Mini Digital Volt Meter Voltage Tester Two Line Voltmeter

0.56" Blue Red Dual LED Display Mini Digital Voltmeter Ammeter DC 100V 100A Panel Amp Volt Voltage Current Meter Tester
Upgrade Options

LCD GNSS Disciplined Oscillator GPS BDS GLONASS GALILEO High Precision Timing Device OCXO Alternative Square Sine Wave
ESP138D ESP32 H-RADIO SI4732 Full Band FM AM SSB AIR Band Receiver + TEF6686 FM Receiver 2 in 1 Handheld Radio with Bluetooth
MX-S3 SDR Radio Transceiver Switcher/Auxiliary Receiver Compatible with IC7100 FT-891 450D 991A








