
1 / 3 · Click to enlarge
AI Summary
A 6mm diameter micro gear motor with a 38mm body, 5 to 2000 RPM output and 5g.cm rated torque. Its tiny footprint makes it a practical choice for driving small, light mechanisms in compact builds.
Key Highlights
- 6mm diameter body fits tight, space-limited assemblies
- Output speed range from 5 to 2000 RPM
- Rated torque of 5g.cm for light precision loads
- Compact 38mm width with low overall weight
- Operating power range of 0.01 to 40 for small electronics
- Suits audio-visual, household and office automation projects
Ideal For
- Makers building compact mechanisms with tight space limits
- Hobbyists working on small model and RC projects
- Prototypers in audio-visual and office automation equipment
- Students learning about reduction gearboxes and small motors
- Repairers replacing a small motor in light household devices
Buying Tip
Confirm the output speed and shaft details of the exact unit before ordering, since the 5 to 2000 RPM figure covers a family of gear ratios rather than one fixed speed.
Elecvora expert review
Our verdict
A genuinely tiny gear motor that is useful when millimetres matter and the load is light. It is a builder's component rather than a plug-and-play part, so plan your power and mounting around it.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Very small 6mm diameter for tight builds
- Broad 5 to 2000 RPM speed range
- Light 5g.cm torque suits delicate mechanisms
- Low shipping weight and small pack size
Cons
- No connector, driver or mounting hardware included
- Specific voltage and shaft details are not listed
- Light torque limits it to low-resistance loads
Best for
Compact builds that need small, controlled motion
Not ideal for
Driving heavy or stiff mechanisms that need high torque
Specifications
| Item Type | Micro Gear Type |
|---|---|
| Rated Speed (RPM) | 2000, 5 to 2000 |
| Diameter (mm) | 6 |
| Width (mm) | 38 |
| Operating Power | 0.01-40 |
| Rated Torque (kg-cm) | 1.0 gf.cm -50kgf.cm |
| Shipping Weight | 0.03 kg |
| Shipping Dimensions | 4 × 4 × 1 cm |
What's in the box
- 1 x Micro Gear Motor 6mm Dia., 5g.cm
Frequently Asked Questions
What can this micro gear motor be used for?
What is the rated torque?
Does it come with a connector or driver?
What speed does it run at?
How should I care for it?
What are the dimensions?
Overview
This micro gear motor packs a precision reduction gearbox into a body just 6mm in diameter and 38mm wide. It is designed for builders who need small, controlled motion in a space where a standard motor simply will not fit. The output speed can range from 5 to 2000 RPM, and rated torque is 5g.cm, so it handles light loads rather than heavy mechanical work.
Because the operating power range is 0.01 to 40, the motor suits small electronic assemblies and low-power projects. It is a single motor only, so you supply the mounting, wiring and control electronics that fit your build.
Key Features
- Very small diameter: 6mm across, useful for miniature mechanisms and tight enclosures.
- Wide speed range: output from 5 to 2000 RPM gives flexibility across different gear ratios and tasks.
- Light-duty torque: 5g.cm rated torque is intended for small, low-resistance loads.
- Compact length: 38mm width keeps the unit short enough for slim housings.
- Low shipping weight: 0.03 kg, so it is easy to keep as a spare part.
Specifications Explained
Diameter and width: the 6mm diameter and 38mm width define how much room the motor needs. Check both figures against your enclosure before ordering.
Rated speed: the 5 to 2000 RPM span describes the output speed range of the gearbox family. Your exact unit will run at a fixed output speed within that band, so confirm the ratio you need for your project.
Rated torque: 5g.cm is a light load rating. Use it for small wheels, light linkages or gentle actuation, not for driving heavy gears or stiff mechanisms.
Operating power: the 0.01 to 40 range covers small electronics work. Match your supply and driver to the motor you receive.
Compatibility and Requirements
This is a bare motor, so it needs a suitable power source and control method chosen by the builder. No connector, driver or mounting hardware is included. Because the supplied data does not list a specific voltage or shaft type, check the markings on the unit you receive before wiring it up. The motor is intended for light mechanical loads only.
Typical Uses
- Small mechanisms in audio and visual equipment
- Household applications needing compact motion
- Office automation equipment prototypes
- Model and hobby projects with tight space limits
- Light actuation in custom electronic builds
What's in the Box
One micro gear motor, 6mm diameter, 5g.cm rated torque. Nothing else is included.
Quick specs
- Item Type
- Micro Gear Type
- Rated Speed (RPM)
- 2000, 5 to 2000
- Diameter (mm)
- 6
- Width (mm)
- 38
- Operating Power
- 0.01-40
- Rated Torque (kg-cm)
- 1.0 gf.cm -50kgf.cm













