Skip to main content

Worldwide Shipping · Secure Payments

At a glance

This flight controller accessories is a good fit for everyday home and hobby use. Main specs: item type Module; ic chip ATmega328P; supply voltage 12. Check that your power source supplies 12 before connecting it.

Key Highlights

  • Small and easy to carry or mount
  • Item Type: Module
  • IC Chip: ATmega328P
  • Supply Voltage: 12

Ideal For

  • Room or desk lighting
  • Workbench lighting
  • Outdoor use

Buying Tip

Read the full specifications and the package contents list below to make sure it does what you need.

Specifications

Item TypeModule
IC ChipATmega328P
Supply Voltage12
Current (mA)500
Dimensions (L x W x H) mm58 x 22 x 12
Shipping Weight0.08 kg
Shipping Dimensions5 × 4 × 1 cm

Overview

The Mini OSD FOR APM 2.6/2.8 is listed in our flight controller accessories range and suits everyday home and hobby use. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Item Type: Module
  • IC Chip: ATmega328P
  • Supply Voltage: 12 (match this to your power supply; too high a voltage can damage the part)
  • Current (mA): 500 (your supply must deliver at least this much current)
  • Dimensions (L x W x H) mm: 58 x 22 x 12 (measure your mounting space before ordering)
  • Shipping Weight: 0.08 kg (important for drones, RC models and anything you carry)
  • Shipping Dimensions: 5 × 4 × 1 cm (measure your mounting space before ordering)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

This Mini OSD FOR APM 2.6 AND APM 2.8 is a mini Arduino based on-screen display board. It’s tailored for use with ArduPilot Mega and the MAVlink protocol and designed to be as small as possible.

Its main components are an ATmega328P 8 bit microcontroller with an Arduino bootloader and a MAX7456 monochrome on-screen display. Programming is done through an FTDI-compatible 6-pin cable.

Mini OSD with FOR APM 2.6 AND APM 2.8 is companion On Screed Display (OSD) Board for APM. It reads all the MAVLink data in the APM telemetry stream and overlays it on the video stream if you’re using an onboard camera and wireless video transmitter. This is useful if you’re flying in First Person View (FPV) mode or don’t want to use a laptop at the field to see your telemetry data in the Mission Planner.

     

Specifications and Features :

  1. ATmega328P with Arduino bootloader
  2. MAX7456 monochrome on-screen display chip.
  3. FTDI cable compatible pinout
  4. Standard 6-pin ISP header (Not Populated)
  5. Two independent power sections with an LED indicator on each
  6. Solder jumpers for combining the power sections.
  7. Solder jumper for PAL video option
  8. Exposed test points for HSYNC and LOS
  9. Two independent power and ground sections to isolate the OSD’s analog stage:
  10. A +5V section for the ATmega and the OSD’s digital stage, powered by the FTDI cable or other +5V sources
  11. A regulated +5V section for the OSD’s analog stage, powered by the video in/out a header and capable of handling up to +12V input.
  12. Solder jumpers are available to combine the two power and ground sections if desired.
  13. Supports APM2, APM2.5, APM2.6.

Package Includes :

1 x Mini OSD FOR APM 2.6 AND APM 2.8.

1 x Set of female to female jumper cables.

Quick specs

Item Type
Module
IC Chip
ATmega328P
Supply Voltage
12
Current (mA)
500
Dimensions (L x W x H) mm
58 x 22 x 12
Shipping Weight
0.08 kg
See all specifications