
1 / 3 · Click to enlarge
AI Summary
The MP005770 is a 1uH radial leaded power inductor rated for 18A RMS and 23A saturation. Its 0.003ohm DC resistance helps reduce losses in through-hole power circuits.
Key Highlights
- 1uH inductance with ±15% tolerance for power circuit design
- 18A RMS current rating supports demanding through-hole applications
- 23A saturation current for short-term peak loads
- Very low 0.003ohm DC resistance reduces conduction losses
- Unshielded radial leaded construction for easy PCB mounting
- Compact 1 × 1 × 1 cm shipping size, lightweight at 0.001 kg
Ideal For
- Electronics hobbyists building through-hole power supplies
- Repair technicians replacing radial inductors
- Design engineers prototyping DC-DC converters
- Students learning about power inductor specifications
- Makers working on high-current filter circuits
Buying Tip
Confirm your circuit’s continuous and peak currents stay below 18A RMS and 23A saturation, and allow space for the unshielded magnetic field.
Elecvora expert review
Our verdict
The MP005770 offers a solid combination of 1uH inductance and high current ratings in a simple radial package. Its low DC resistance is a clear advantage for through-hole power designs, though the unshielded construction requires some layout care.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- High 18A RMS and 23A saturation current ratings
- Very low 0.003ohm DC resistance
- Easy through-hole radial mounting
- Compact and lightweight
Cons
- Unshielded design may cause magnetic interference
- ±15% tolerance is wider than precision inductors
- No datasheet or accessories included
Best for
Through-hole power supply and filter projects needing a 1uH high-current inductor
Not ideal for
Space-constrained or magnetically sensitive designs requiring shielded inductors
Specifications
| Inductance | 1uH |
|---|---|
| Inductor Construction | Unshielded |
| RMS Current (Irms) | 18A |
| Saturation Current (Isat) | 23A |
| Tolerance (%) | 15 |
| DC Resistance (Ω) | 0.003Ohm |
| Shipping Weight | 0.001 kg |
| Shipping Dimensions | 1 × 1 × 1 cm |
What's in the box
- 1 x MP005770-Radial Power Inductor
Frequently Asked Questions
What is the inductance and tolerance of this inductor?
Can this inductor handle 20A continuously?
Is this component shielded?
What is included in the package?
What is the DC resistance of this inductor?
How should I mount this inductor?
Overview
The MP005770 is a radial leaded power inductor designed for through-hole mounting in power electronic circuits. It provides 1uH of inductance with an RMS current rating of 18A and a saturation current of 23A, making it a practical choice for designs that need to handle substantial current in a compact footprint. The unshielded construction keeps the component straightforward to install and suitable for general-purpose power applications.
Key Features
- 1uH inductance with ±15% tolerance for predictable circuit behaviour
- 18A RMS current rating for continuous power handling
- 23A saturation current to accommodate short-term peaks
- 0.003ohm DC resistance to minimise resistive losses
- Radial leaded, unshielded format for through-hole assembly
Specifications Explained
Inductance defines how much energy the component stores for a given current; at 1uH, this part suits high-frequency switching power supplies and filters. The ±15% tolerance means actual inductance may vary within that band, which is normal for power inductors and should be considered in critical designs. RMS current (Irms) of 18A indicates the continuous current the inductor can carry under stated conditions, while saturation current (Isat) of 23A is the point where inductance drops significantly. The 0.003ohm DC resistance is very low, helping to keep voltage drop and heat generation down at high currents. Unshielded construction means the inductor does not have a closed magnetic shield, so keep it away from sensitive magnetic components if layout permits.
Compatibility and Requirements
This is a through-hole radial component, so it requires a PCB or perfboard with suitable lead spacing and soldering equipment. No additional accessories are included. Ensure your circuit’s current and voltage requirements fall within the 18A RMS and 23A saturation ratings, and verify that the 1uH value and ±15% tolerance suit your design. The unshielded design may require attention to nearby magnetic fields in dense layouts.
Typical Uses
Common applications include DC-DC converter output filters, power supply smoothing, and general-purpose energy storage in through-hole projects. It is also useful for repair and replacement work where a 1uH, high-current radial inductor is specified. Hobbyists and engineers can use it in prototyping and educational builds that involve switching regulators or current filtering.
What's in the Box
One MP005770 radial power inductor is supplied. No other items are included.
Quick specs
- Inductance
- 1uH
- Inductor Construction
- Unshielded
- RMS Current (Irms)
- 18A
- Saturation Current (Isat)
- 23A
- Tolerance (%)
- 15
- DC Resistance (Ω)
- 0.003Ohm













