
1 / 3 · Click to enlarge
AI Summary
The MP005777 is a radial leaded 300nH power inductor rated for 43A RMS and 50A saturation with 650µohm DC resistance. Its high current handling and low resistance suit compact high-current power stages and prototypes.
Key Highlights
- 300nH inductance for high-current filtering and energy storage roles
- 43A RMS current rating supports demanding continuous load paths
- 50A saturation current provides headroom before core saturation
- 650µohm DC resistance limits conduction losses
- Unshielded radial construction for direct through-hole soldering
- ±15% inductance tolerance, typical for this component class
Ideal For
- Power electronics builders working on high-current conversion stages
- Repair technicians replacing leaded inductors
- Students and hobbyists building through-hole prototypes
- Bench engineers testing high-current filter designs
Buying Tip
Confirm your board's lead spacing and expected peak current against the 43A RMS and 50A saturation figures before ordering, since this is a single unshielded through-hole part.
Elecvora expert review
Our verdict
A practical high-current leaded inductor with useful headroom between its RMS and saturation ratings. It is a straightforward choice for through-hole builds where low resistance and high current matter more than shielding.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- High 43A RMS and 50A saturation ratings
- Very low 650µohm DC resistance
- Simple radial through-hole mounting
- Compact shipping size and low weight
Cons
- Unshielded construction means stray magnetic field
- ±15% tolerance requires design margin
- Single component only, no hardware included
Best for
High-current through-hole power stages and prototypes
Not ideal for
Space-constrained surface-mount designs needing shielded parts
Specifications
| Inductance | 300nH |
|---|---|
| Inductor Construction | Unshielded |
| RMS Current (Irms) | 43A |
| Saturation Current (Isat) | 50A |
| Tolerance (%) | 15 |
| DC Resistance (Ω) | 650uOhm |
| Shipping Weight | 0.001 kg |
| Shipping Dimensions | 1 × 1 × 1 cm |
What's in the box
- 1 x MP005777-Radial Power Inductor
Frequently Asked Questions
What is the inductance of this part?
How much current can it handle?
Is this inductor shielded?
How is it mounted?
What is included with the purchase?
How should I store it?
Overview
The MP005777 is a radial leaded power inductor with a nominal inductance of 300nH. It is designed for circuits that carry high current, with a 43A RMS rating and a 50A saturation current. The part uses an unshielded construction and a DC resistance of 650µohm, so it introduces very little series resistance into the path it serves. Tolerance is ±15%, which is normal for a component of this type.
This is a single through-hole inductor, suited to hand assembly, prototyping and repair work where a leaded part is easier to fit than a surface-mount equivalent.
Key Features
- 300nH inductance: a low value suited to high-current paths rather than low-frequency bulk filtering.
- 43A RMS current rating: supports continuous current well beyond typical small-signal inductors.
- 50A saturation current: gives headroom before the core saturates and inductance falls away.
- 650µohm DC resistance: keeps resistive loss and heating low at high currents.
- Radial leaded package: straightforward to insert and solder on through-hole boards.
- Unshielded construction: compact and simple, but the magnetic field is not confined.
Specifications Explained
Inductance and tolerance
At 300nH, this part stores a modest amount of energy per amp, which is why it pairs with high current rather than high inductance. The ±15% tolerance means the actual value can sit somewhat above or below the nominal figure, so designs should allow for that spread.
Current ratings
The 43A RMS figure describes the current the part is rated to carry in normal operation, while the 50A saturation current marks the point where the core approaches saturation. In practice, keep operating current comfortably below the saturation figure and respect the RMS rating for thermal reasons.
DC resistance
A 650µohm DC resistance is low, which matters when tens of amps flow through the component. Lower resistance means less wasted power and less self-heating in the inductor itself.
Compatibility and Requirements
This is a radial leaded, through-hole component, so it requires a board or assembly with suitable lead spacing and pads, plus soldering equipment. No shielding is provided, so consider the effect of its stray field on nearby sensitive circuits. No other ratings or certifications are specified in the product data.
Typical Uses
- High-current power conversion stages and output filtering
- Prototype and test builds using through-hole construction
- Repair or replacement work on equipment using leaded inductors
- Educational and bench projects exploring high-current magnetics
What's in the Box
One MP005777 radial power inductor is supplied. The shipping weight is listed as 0.001kg and the shipping dimensions as 1 × 1 × 1cm.
Quick specs
- Inductance
- 300nH
- Inductor Construction
- Unshielded
- RMS Current (Irms)
- 43A
- Saturation Current (Isat)
- 50A
- Tolerance (%)
- 15
- DC Resistance (Ω)
- 650uOhm













