
1 / 3 · Click to enlarge
AI Summary
A radial leaded 470nH power inductor rated for 38A RMS and 50A saturation with just 800µΩ DC resistance. Its high current handling and low loss make it well suited to compact power supply and FPV power builds.
Key Highlights
- 470nH inductance for high-frequency power conversion circuits
- 38A RMS continuous current rating
- 50A saturation current for transient headroom
- Ultra-low 800µΩ DC resistance reduces losses
- Unshielded radial leaded construction for easy PCB mounting
- ±15% inductance tolerance
Ideal For
- Electronics hobbyists building high-current DC-DC converters
- FPV drone builders working on power distribution boards
- Product developers prototyping compact power supplies
- Technicians repairing or upgrading power circuits
- Makers designing motor drive or battery-powered projects
Buying Tip
Check that your PCB hole spacing matches the radial lead pitch and confirm your circuit’s continuous current stays below 38A RMS for reliable operation.
Elecvora expert review
Our verdict
A solid high-current inductor with excellent current handling and very low DCR for its class. It is a practical choice for compact power designs where through-hole mounting is acceptable.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- High 38A RMS and 50A saturation ratings
- Very low 800µΩ DC resistance
- Easy radial through-hole installation
- Compact size for its current capability
Cons
- Unshielded construction may radiate magnetic fields
- Requires soldering and PCB hole spacing compatibility
- No mounting hardware or datasheet included
Best for
High-current DC-DC converters and power distribution boards
Not ideal for
Space-constrained SMD-only designs or applications requiring magnetic shielding
Specifications
| Inductance | 470nH |
|---|---|
| Inductor Construction | Unshielded |
| RMS Current (Irms) | 38A |
| Saturation Current (Isat) | 50A |
| Tolerance (%) | 15 |
| DC Resistance (Ω) | 800uOhm |
| Shipping Weight | 0.001 kg |
| Shipping Dimensions | 1 × 1 × 1 cm |
What's in the box
- 1 x MP005785-Radial Power Inductor
Frequently Asked Questions
What is the inductance of this inductor?
Can this inductor handle 40A continuously?
Is this inductor shielded?
What is included in the package?
What is the DC resistance?
How should I mount this inductor?
Overview
The MP005785-Radial Power Inductor is a through-hole inductive component built for circuits that demand high current in a small footprint. Its 470nH inductance is typical for switching power supplies operating at elevated frequencies, where low inductance values help reduce physical size while maintaining energy storage capability. The radial leaded format allows direct insertion into plated through-holes, making it suitable for prototyping and production alike.
This inductor is unshielded, which keeps the construction simple and cost-effective. With an RMS current rating of 38A and a saturation current of 50A, it can handle substantial continuous and peak currents. The 800µΩ DC resistance is particularly low, helping to limit resistive heating during high-current operation.
Key Features
- 470nH inductance — suited to high-frequency DC-DC converters and filters.
- 38A RMS current — supports continuous high-current loads.
- 50A saturation current — provides margin for current spikes.
- 800µΩ DC resistance — minimises conduction losses and heat.
- ±15% tolerance — standard precision for power inductors.
- Radial leaded, unshielded — easy to install and inspect.
Specifications Explained
Inductance (470nH): This is the nominal inductance value at low current. In switching regulators, it directly affects ripple current and transient response. A lower value like 470nH is common in high-frequency designs where fast response is needed.
RMS current (38A): This is the continuous current the inductor can carry without excessive heating. It is a key figure when sizing components for motor drivers, battery-powered systems, and power distribution boards.
Saturation current (50A): At this current level the core begins to saturate and inductance drops. The 50A rating gives headroom above the 38A RMS figure for short current surges.
DC resistance (800µΩ): Very low resistance means less power is wasted as heat. This is important in high-current paths where even small resistance can cause significant losses.
Tolerance (±15%): The actual inductance may vary within this band. Designs should account for this variation, especially in resonant or precision filtering circuits.
Compatibility and Requirements
This is a radial leaded through-hole inductor. It requires a PCB or prototype board with appropriately spaced holes and solder for installation. No additional mounting hardware is included. Ensure your circuit’s current and voltage requirements fall within the stated ratings; the inductor itself does not impose a voltage limit beyond what the insulation and construction can withstand, so observe good engineering practice for your application.
Typical Uses
- DC-DC converter output filters
- Motor drive and ESC power stages
- FPV power distribution boards
- Battery-powered high-current projects
- General power supply smoothing
What's in the Box
One MP005785-Radial Power Inductor. No other items are included.
Quick specs
- Inductance
- 470nH
- Inductor Construction
- Unshielded
- RMS Current (Irms)
- 38A
- Saturation Current (Isat)
- 50A
- Tolerance (%)
- 15
- DC Resistance (Ω)
- 800uOhm













