
At a glance
This gas sensors is a good fit for makers, students and electronics hobbyists. Main specs: shipping weight 0.003 kg.
Key Highlights
- Shipping Weight: 0.003 kg
Ideal For
- Arduino, ESP32 and Raspberry Pi projects
- School and college lab work
- Prototypes and test rigs
Buying Tip
Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.
Specifications
| Shipping Weight | 0.003 kg |
|---|---|
| Shipping Dimensions | 3 × 3 × 2 cm |
Overview
The MP135 Air Pollution Gas Sensor DIP-4 is listed in our gas sensors range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.
Specifications explained
- Shipping Weight: 0.003 kg (important for drones, RC models and anything you carry)
- Shipping Dimensions: 3 × 3 × 2 cm (measure your mounting space before ordering)
Before you order
Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.
The MP135 is a metal oxide semiconductor (MOS) gas sensor designed for detecting changes in air composition caused by reducing gases such as hydrogen (H₂), carbon monoxide (CO), and alcohol vapors (VOC-like gases).
It provides an analog resistance-based output that varies depending on gas concentration in the environment. The sensor is commonly used for general air-quality trend monitoring and detection of gas leaks or pollution changes.
Due to its sensing principle, the MP135 has non-selective behavior, meaning it cannot distinguish between specific gases and is affected by humidity and temperature variations. It is suitable for indicative air-quality sensing, but not for calibrated or regulatory-grade measurements.
Features:
- Sensitive to hydrogen (H₂), carbon monoxide (CO), and alcohol vapors (VOC-like gases)
- Non-selective MOS gas sensing (cannot distinguish individual gases)
- Analog resistance-based output suitable for microcontroller ADC input
- Response time in seconds range (depends on conditions)
- Performance affected by temperature and humidity
- Requires calibration for meaningful readings
- DIP-4 package suitable for PCB and prototyping applications
Specifications:
- Item Type: MP135 MOS air-quality gas sensor
- Package Type: DIP-4
- Detection Gases:
- Hydrogen (H₂)
- Carbon monoxide (CO)
- Alcohol vapors (VOC-like reducing gases)
- Output Type: Analog voltage (resistance-based divider output)
- Operating Voltage: 5V DC heater supply
- Heater Resistance: ~31Ω ± 3Ω
- Heater Power Consumption: ≤900 mW
- Load Resistance: External adjustable resistor required
- Heater Power Consumption: ≤900 mW
- Load Resistance: Adjustable
- Response Time: Fast response & recovery
- Weight : 1g
Package Includes:
1 x MP135 Air Pollution Gas Sensor DIP-4













