
1 / 4 · Click to enlarge
At a glance
This gas sensors is a good fit for makers, students and electronics hobbyists. Main specs: shipping weight 0.008 kg.
Key Highlights
- Shipping Weight: 0.008 kg
Ideal For
- Arduino, ESP32 and Raspberry Pi projects
- School and college lab work
- Prototypes and test rigs
Buying Tip
Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.
Specifications
| Shipping Weight | 0.008 kg |
|---|---|
| Shipping Dimensions | 5 × 5 × 3 cm |
Overview
The MQ-131 Ozone Gas Detection Sensor Module high concentration is listed in our gas sensors range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.
Specifications explained
- Shipping Weight: 0.008 kg (important for drones, RC models and anything you carry)
- Shipping Dimensions: 5 × 5 × 3 cm (measure your mounting space before ordering)
Before you order
Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.
The MQ-131 ozone gas sensor module is a low-cost metal-oxide (SnO₂) based sensor designed for detecting ozone (O₃) in ambient air. It is commonly used for environmental monitoring, ozone generator feedback, and general air quality experiments.
The sensing element operates by changing its electrical resistance when exposed to ozone gas. This change is measured as an analog voltage output through onboard circuitry, which can be interfaced with microcontrollers such as Arduino, ESP32, and Raspberry Pi.
The MQ-131 is sensitive to low-to-moderate ozone concentrations and requires calibration for meaningful quantitative readings. It is best suited for relative measurement and threshold detection rather than precise industrial-grade ozone concentration analysis.
Features:
- Sensitive to ozone (O₃) and other oxidizing gases
- Provides analog output (variable resistance signal) and digital threshold output (TTL)
- Onboard potentiometer for adjusting digital trigger threshold
- LED indicators for power and digital output status
- Compatible with microcontrollers such as Arduino, ESP32, Raspberry Pi, and PLC input systems
- Compact breakout module with mounting holes
- Replaceable MQ-series sensor head design
- Suitable for low-cost environmental and experimental gas detection applications
Specifications:
- Item Type : Ozone Gas Sensor Module
- Sensor Model : MQ131
- Gas Detected: Ozone (O₃), also sensitive to Cl₂ / NO₂
- Sensing Material: SnO₂ (Tin Dioxide)
- Output Type : Analog & Digital (TTL)
- Operating Voltage : 5V DC
- Heating Voltage : 5V DC
- Detection Range : 10PPB-2PPM Ozone
- Sensitivity : High Sensitivity to Ozone
- Sensitivity Adjustment : Onboard Potentiometer
- Response Time : Less than 10 Seconds
- Recovery Time : Less than 30 Seconds
- Preheating Time : Approximately 48 Hours
- Operating Temperature : -10°C to +50°C
- Load Resistance : Adjustable
- Signal Indicator : LED Status Indicator
- Module Dimensions : 32mm × 22mm × 20mm
- Weight : ~5g
Package Includes:
1 x MQ-131 Ozone Gas Detection Sensor Module high concentration













