Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A compact RISC-V development board featuring the CH32V305RBT6 MCU, dual USB Type-C ports, an LCD FPC interface, and an SD card slot. It supports direct USB programming without an external downloader, making it ideal for rapid prototyping.

Key Highlights

  • Powered by WCH CH32V305RBT6 RISC-V microcontroller
  • Dual USB Type-C ports: USB1 full-speed, USB2 high-speed
  • Direct USB programming – no extra downloader needed
  • FPC-12P LCD interface supports ILI9341 and ST7789
  • SD card slot with SPI protocol for storage projects
  • Onboard 8 MHz and 32.768 kHz crystal oscillators

Ideal For

  • Embedded developers exploring RISC-V
  • Electronics hobbyists building display projects
  • Students learning microcontroller programming
  • Makers prototyping IoT devices
  • Engineers needing a compact USB-programmable board

Buying Tip

Check that your LCD module uses an FPC-12P connector and is compatible with ILI9341 or ST7789 before purchasing.

Elecvora expert review

Our verdict

The MUSE LAB nanoCH32V305 packs a useful set of interfaces into a tiny RISC-V board, making it a practical choice for display and storage projects. Direct USB programming simplifies the workflow, though you will need compatible LCD modules and a basic understanding of RISC-V tools.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Dual USB Type-C ports with high-speed support
  • Direct USB programming eliminates extra hardware
  • Onboard LCD and SD card interfaces
  • Compact and lightweight design
  • Open-source flexibility

Cons

  • Requires compatible FPC-12P LCD modules
  • Limited documentation compared to mainstream platforms
  • No onboard debugger beyond USB programming

Best for

Developers and hobbyists wanting a small RISC-V board with display and storage interfaces

Not ideal for

Those seeking a plug-and-play Arduino-compatible experience

Specifications

Shipping Weight0.029 kg
Shipping Dimensions12.5 × 10 × 2 cm

What's in the box

  • 1 x Muse Lab nanoCH32V305 Development Board
  • 2 x Header Pin
  • 1 x USB Cable

Frequently Asked Questions

Do I need an external programmer to upload code?
No, the board supports direct USB programming. You can download firmware through the USB connection without any additional hardware.
Which LCD modules are compatible?
The FPC-12P LCD interface is compatible with ILI9341, ST7789, and similar display modules that use the same connector.
How is the board powered?
The board is powered through either of the USB Type-C ports when connected to a host or a USB power source.
What is included in the package?
The package includes the nanoCH32V305 development board, two header pins, and a USB cable.
Can I use the SD card slot for data logging?
Yes, the SD card slot supports SPI protocol, allowing you to read and write SD cards for data storage and logging applications.
Is the board open source?
Yes, the design is open source, so you can customise and experiment with it freely.

Overview

The MUSE LAB nanoCH32V305 is a compact development board designed around the WCH CH32V305RBT6, a RISC-V microcontroller that brings modern open-source architecture to embedded projects. It combines dual USB Type-C connectivity, a dedicated LCD interface, and an SD card slot on a small board that fits easily into breadboards and portable enclosures.

Whether you are exploring RISC-V for the first time or building a display-based controller, the nanoCH32V305 provides the essential interfaces without requiring additional adapters or programmers.

Key Features

  • CH32V305RBT6 MCU: RISC-V core for flexible, open-source development.
  • Dual USB Type-C: USB1 full-speed device and USB2 high-speed device for data and power.
  • Direct USB programming: Download firmware over USB—no external downloader needed.
  • LCD interface: FPC-12P connector compatible with ILI9341, ST7789, and similar displays.
  • SD card slot: Read and write SD cards via SPI protocol for data logging and storage.
  • Precise timing: Onboard 8 MHz and 32.768 kHz crystal oscillators.
  • Open-source design: Customise and experiment freely.

Specifications Explained

The CH32V305RBT6 microcontroller is the heart of the board, offering RISC-V architecture in a ready-to-use form factor. The two USB Type-C ports serve different roles: USB1 is a full-speed device interface, while USB2 supports high-speed device operation, giving you flexibility for data transfer or peripheral emulation. The FPC-12P LCD connector simplifies wiring to popular display modules, and the SD card slot uses SPI for straightforward storage expansion. The onboard crystals ensure reliable clock generation for time-sensitive tasks. Measuring just 65 × 28 × 10 mm and weighing 8 g, the board is easy to embed.

Compatibility and Requirements

The LCD interface is compatible with ILI9341 and ST7789 display modules, among others. The SD card slot supports SPI protocol. Programming requires a USB connection to a host computer; no additional hardware programmer is needed. The board is open source, so software tools and community resources can be adapted to your needs.

Typical Uses

This board is ideal for display controllers, data loggers, IoT device prototypes, and educational projects. Its compact size and direct USB programming make it a convenient choice for rapid iteration.

What's in the Box

  • 1 × Muse Lab nanoCH32V305 Development Board
  • 2 × Header Pin
  • 1 × USB Cable

Quick specs

Shipping Weight
0.029 kg
Shipping Dimensions
12.5 × 10 × 2 cm
See all specifications