Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A compact PMOD expansion board that adds SD and SDHC card storage over SPI. It gives iCESugar and other PMOD-compatible boards simple non-volatile storage for logging and file transfer.

Key Highlights

  • Standard 6-pin PMOD connector for quick board-to-board integration
  • SPI interface supports SD and SDHC memory cards
  • Designed for iCESugar FPGA boards and other PMOD-compatible systems
  • 3.3V operating voltage for embedded and FPGA platforms
  • SPI data rates up to 25MHz for responsive card access
  • Compact board measuring 48 x 15 x 7mm and weighing about 3g

Ideal For

  • FPGA developers adding removable storage to iCESugar projects
  • Students learning SPI and SD card interfacing
  • Embedded designers building data logging prototypes
  • Makers using PMOD-compatible microcontroller boards

Buying Tip

Confirm that your host board exposes a standard PMOD connector with SPI signals and 3.3V logic before ordering, and plan to supply your own SD or SDHC card.

Elecvora expert review

Our verdict

A focused, low-cost PMOD module that adds SD and SDHC storage to iCESugar and other compatible boards without custom wiring. It suits SPI-based logging and file transfer projects where a compact 3.3V add-on is enough.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Standard 6-pin PMOD connector simplifies integration
  • Supports both SD and SDHC cards over SPI
  • Compact 48 x 15 x 7mm board at about 3g
  • 3.3V operation matches many FPGA and microcontroller platforms
  • SPI data rates up to 25MHz

Cons

  • SD or SDHC card is not included
  • Requires a host with a standard PMOD connector and SPI support
  • Limited to 3.3V operating systems

Best for

iCESugar and PMOD-compatible FPGA or microcontroller projects needing removable storage

Not ideal for

Systems without a PMOD connector or non-3.3V logic platforms

Specifications

Shipping Weight0.007 kg
Shipping Dimensions9 × 6 × 2 cm

What's in the box

  • 1 x Muse Lab PMOD-SDCARD Extension Board ICESugar FPGA Expansion Module

Frequently Asked Questions

What is this PMOD-SDCARD board used for?
It adds SD and SDHC card storage to FPGA and microcontroller projects over an SPI interface. It is intended for PMOD-compatible hosts such as iCESugar FPGA boards.
Which memory cards does it support?
The module supports SD and SDHC cards. A card is not included, so you will need to provide one.
What voltage does the board require?
It operates at 3.3V. Make sure your host platform provides a compatible 3.3V logic environment.
How fast can the SPI interface run?
The board supports SPI data rates up to 25MHz. Keep your host SPI clock within that limit.
Is it compatible with non-PMOD boards?
It is designed for standard PMOD connectors and PMOD-compatible systems. A board without a PMOD interface would need an appropriate adapter or wiring.
What is included with the module?
The package includes one Muse Lab PMOD-SDCARD Extension Board. An SD card, cable and host board are not listed as included.

Overview

The MUSE LAB PMOD-SDCARD Extension Board gives FPGA and microcontroller projects a simple route to removable storage. It pairs a standard 6-pin PMOD connector with an SPI-based SD card interface, so a compatible host board can read and write SD or SDHC cards without a custom adapter or hand-built wiring. The module is designed with iCESugar FPGA boards in mind and also works with other PMOD-compatible systems.

At roughly 48 x 15 x 7mm and about 3g, the board adds very little bulk to a breadboard, carrier or enclosure. It operates at 3.3V and supports SPI data rates up to 25MHz, which is useful for data logging, configuration storage and file transfer in embedded designs.

Key Features

  • Standard 6-pin PMOD connector for straightforward integration with PMOD-compatible hosts.
  • SPI communication interface for SD and SDHC card access.
  • 3.3V operation suited to FPGA and microcontroller platforms.
  • SPI data rates up to 25MHz to support responsive storage operations.
  • Compact footprint of 48 x 15 x 7mm and approximately 3g.
  • Designed for iCESugar FPGA boards and other PMOD-compatible systems.

Specifications Explained

The 6-pin PMOD connector is the physical and electrical link between the module and your host board. Because it follows the standard PMOD format, you can plan the connection around the PMOD pinout rather than designing a dedicated SD card circuit.

SPI is the communication method used to talk to the card. It keeps the interface simple and is widely supported on FPGA and microcontroller platforms. The module accepts SD and SDHC cards, covering common removable storage options for embedded projects.

The 3.3V operating voltage matches the logic level used by many FPGA and microcontroller boards. SPI data rates up to 25MHz indicate the interface speed the board is specified to support, which helps when planning logging or file transfer tasks.

Compatibility and Requirements

The board is intended for iCESugar FPGA boards and other systems with a standard PMOD connector. Your host platform must support SPI communication and provide a 3.3V operating environment. An SD or SDHC card is required for storage and is not listed as part of the package.

Typical Uses

  • Data logging from FPGA or microcontroller projects.
  • Storing configuration files and small data sets.
  • File transfer between an embedded system and an SD card.
  • Student and developer projects that need removable non-volatile storage.
  • Prototyping storage features on PMOD-compatible hardware.

What's in the Box

1 x Muse Lab PMOD-SDCARD Extension Board ICESugar FPGA Expansion Module with standard PMOD connector and SD/SPI protocol support.

Quick specs

Shipping Weight
0.007 kg
Shipping Dimensions
9 × 6 × 2 cm
See all specifications