Skip to main content

Worldwide Shipping · Secure Payments

At a glance

This level sensors is a good fit for makers, students and electronics hobbyists. Main specs: supply voltage 2.5V to 5.5V; item type Continuous or segmented level; operating temperature (°c) -40°C to +85°C. Check that your power source supplies 2.5V to 5.5V before connecting it.

Key Highlights

  • Supply Voltage: 2.5V to 5.5V
  • Item Type: Continuous or segmented level
  • Operating Temperature (°C): -40°C to +85°C

Ideal For

  • Arduino, ESP32 and Raspberry Pi projects
  • School and college lab work
  • Prototypes and test rigs

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

Supply Voltage2.5V to 5.5V
Item TypeContinuous or segmented level
Operating Temperature (°C)-40°C to +85°C
AccuracyUp to 1%
Output InterfaceI2C
Shipping Weight0.025 kg
Shipping Dimensions24 × 22 × 2 cm

Overview

The Mysentech MER-LDM Continuous or segmented level measurement I2C Sensor Modules ROHS is listed in our level sensors range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Supply Voltage: 2.5V to 5.5V (match this to your power supply; too high a voltage can damage the part)
  • Item Type: Continuous or segmented level
  • Operating Temperature (°C): -40°C to +85°C
  • Accuracy: Up to 1%
  • Output Interface: I2C (confirm your cable or board uses the same connector)
  • Shipping Weight: 0.025 kg (important for drones, RC models and anything you carry)
  • Shipping Dimensions: 24 × 22 × 2 cm (measure your mounting space before ordering)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

The Mysentech MER-LDM Continuous or segmented level measurement I2C Sensor Modules ROHS by Minyuan Sensors. It uses the high-frequency capacitive sensing chip MC11S/MC12G to detect changes in dielectric constant, with different capacitance values reflecting varying liquid levels. The module is available in both single-ended-to-ground and differential versions. It is ideal for applications requiring continuous or segmented liquid level measurements.


Features:

  1. Measurement Method: Non-contact and can penetrate 1–10mm of non-metallic containers
  2. Level Accuracy: Up to 1% depending on the medium and electrode installation
  3. Interface: I2C data output
  4. Supply Voltage: 2.5V to 5.5V
  5. Operating Temperature: -40℃ to +85℃

Package Include:

1 x Mysentech MER-LDM Continuous or segmented level measurement I2C Sensor Modules ROHS

Quick specs

Supply Voltage
2.5V to 5.5V
Item Type
Continuous or segmented level
Operating Temperature (°C)
-40°C to +85°C
Accuracy
Up to 1%
Output Interface
I2C
Shipping Weight
0.025 kg
See all specifications