Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A compact Nano R3 board with CH340 USB chip, 14 digital and 8 analog pins, and 32 KB flash in a 43 x 18 mm footprint. It ships unsoldered so you can fit headers or solder wires to match your project.

Key Highlights

  • Nano R3 form factor measuring just 43 x 18 mm
  • CH340 USB-to-serial chip with Mini-USB input port
  • 14 digital I/O pins including 6 PWM outputs
  • 8 analog inputs and 32 KB flash at 16 MHz
  • Runs from Mini-USB or 7 to 12 V external supply
  • Unsoldered board ready for custom header fitting

Ideal For

  • Makers building compact breadboard prototypes
  • Students learning AVR-based electronics
  • Hobbyists fitting electronics into small enclosures
  • Engineers needing a low-cost sensor controller
  • Workshops teaching soldering and header assembly

Buying Tip

Check that you have a Mini-USB cable and the CH340 driver available before your first upload, since neither is included.

Elecvora expert review

Our verdict

A practical, low-cost Nano R3 board for small projects where the CH340 chip and unsoldered delivery are acceptable trade-offs. It delivers the expected pin count and memory for breadboard work without occupying much space.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Compact 43 x 18 mm footprint
  • Full set of 14 digital and 8 analog pins
  • Affordable CH340 USB-serial design
  • Flexible unsoldered format for custom builds

Cons

  • CH340 driver may be needed on some computers
  • Older bootloader fitted
  • Headers and Mini-USB cable not included

Best for

Compact breadboard and sensor projects on a budget

Not ideal for

Users who need a pre-soldered board or original Arduino hardware

Specifications

Item TypeUnsoldered, Development Board
Board TypeNano
Chip TypeCH340
Input Voltage (V)7 to 12 V, 7 to 12
Digital I/O Pins14
Analog I/O Pins8
DC Current per I/O Pin (mA)40
Input PortMINI USB
Flash Memory32 KB
SRAM2
EEPROM1 KB
Clock Speed16 MHz
Weight (g)6
PCB Size ( L x W ) mm43 x 18
ColorBlue
PWM Output Pins6
Model No. / NameNano
ArchitectureAVR
Power Consumption (W)1
Dimensions (L x W x H) mm45x18x5
Operating Voltage (VDC)5
Shipping Weight0.01 kg
Shipping Dimensions6 × 5 × 3 cm

What's in the box

  • 1 x Nano Board R3 with CH340 Chip Mini-USB Port compatible with Arduino (Unsoldered)

Frequently Asked Questions

Does this board come with headers soldered?
No. It is supplied unsoldered, so you fit headers or solder wires yourself depending on your build.
What cable does it use?
It uses a Mini-USB cable for programming and serial monitoring. The cable is not included.
Why is my computer not detecting the board?
The CH340 chip may need a driver installed first. Install the CH340 driver, then reconnect the board and check for a new port.
What power supply can I use?
You can power it over Mini-USB or from an external 7 to 12 V supply. The board selects the source automatically.
How much memory does it have?
It has 32 KB flash, 2 KB SRAM and 1 KB EEPROM, running at 16 MHz.
Is this an original Arduino board?
No. It is a third-party compatible board using the CH340 chip and an older bootloader.

Overview

The Nano Board R3 with CH340 chip packs the core functionality of a full-size Uno-style board into a 43 x 18 mm PCB. It uses an AVR architecture with 32 KB flash, 2 KB SRAM and 1 KB EEPROM running at 16 MHz, giving you 14 digital I/O pins, 8 analog inputs and 6 PWM outputs. The CH340 USB-to-serial chip keeps the board affordable while providing programming and serial monitoring over a Mini-USB connection.

This version is supplied unsoldered, which gives you flexibility: fit standard 0.1 inch headers for breadboard use, or solder wires directly for a permanent build. With a PCB thickness profile of just 45 x 18 x 5 mm and a weight of around 6 g, it slots easily into small enclosures and wearable-style projects.

Key Features

  • Nano R3 layout with 14 digital and 8 analog pins
  • CH340 USB-serial chip with Mini-USB input
  • 6 PWM outputs for dimming, motor control and signal generation
  • 32 KB flash, 2 KB SRAM and 1 KB EEPROM
  • 16 MHz clock speed on AVR architecture
  • Powered by Mini-USB or a 7 to 12 V external supply

Specifications Explained

Pins and I/O: Fourteen digital pins handle inputs and outputs, six of which support PWM for variable control. Eight analog inputs let you read sensors such as potentiometers, light sensors and temperature probes. Each I/O pin is rated for 40 mA DC.

Memory: 32 KB flash stores your sketches, 2 KB SRAM handles runtime variables and 1 KB EEPROM keeps small values after power loss. For most sensor and control sketches this is comfortable headroom.

Power: The board runs at 5 VDC operating voltage and accepts 7 to 12 V on the external input. The power source is selected automatically, so you can leave USB connected while an external supply is attached. Power consumption is around 1 W.

Compatibility and Requirements

The board uses a Mini-USB port rather than the larger USB-B connector found on full-size boards. On some computers the CH340 chip requires a separate driver installation before the board is recognised. The board is supplied with an older bootloader, so plan your toolchain accordingly. It is a third-party compatible board rather than an original Arduino product.

Typical Uses

  • Breadboard prototypes where space is tight
  • Sensor logging and small control projects
  • Compact enclosures and panel-mounted electronics
  • Learning exercises in classrooms and workshops
  • Permanent builds where direct wire soldering is preferred

What's in the Box

One Nano Board R3 with CH340 chip and Mini-USB port, unsoldered. Headers and USB cable are not included.

Quick specs

Item Type
Unsoldered, Development Board
Board Type
Nano
Chip Type
CH340
Input Voltage (V)
7 to 12 V, 7 to 12
Digital I/O Pins
14
Analog I/O Pins
8
See all specifications