
1 / 5 · Click to enlarge
AI Summary
A complete NEO-6M GPS module with EPROM, backup battery, and 25mm active antenna. It delivers 5Hz position updates and 2m accuracy over a simple UART TTL connection.
Key Highlights
- Based on u-blox NEO-6 chip with 50 channels
- 5Hz navigation update rate for smooth tracking
- 2m position accuracy for reliable navigation
- EEPROM saves configuration settings
- Rechargeable backup battery for faster lock
- 25 x 25mm active antenna included
Ideal For
- Drone builders adding GPS navigation
- Arduino and Raspberry Pi enthusiasts
- FPV pilots needing return-to-home
- RC vehicle telemetry projects
- Students learning GPS integration
Buying Tip
Check that your flight controller or microcontroller supports UART TTL and that you have a USB-to-TTL adapter for configuration with u-center software.
Elecvora expert review
Our verdict
The NEO-6M GPS module is a reliable and affordable choice for adding GPS to drones and electronics projects. Its integrated antenna and backup battery simplify setup, though users should note the APM 2.8 incompatibility.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Integrated active antenna and backup battery
- EEPROM for persistent configuration
- Wide input voltage range
- Standard UART TTL interface
Cons
- Not compatible with APM 2.8 flight controllers
- Requires separate USB-to-TTL adapter for configuration
- Antenna cable is only 10cm, limiting placement
Best for
Drone hobbyists and microcontroller users needing a basic GPS module
Not ideal for
Those using APM 2.8 flight controllers or requiring long antenna cables
Specifications
| Item Type | GPS Module |
|---|---|
| Model No. / Name | Ublox NEO-6M |
| Receiver Type | 50 Channels, GPS L1 frequency, C/A Code, SBAS: WAAS, EGNOS, MSAS |
| Input Voltage (V) | 2.7 to 6 |
| Main Chip | NEO-6 |
| Navigation Update Rate | 5Hz |
| Position Accuracy (Meter) | 2 |
| Operating Temperature (°C) | -24 to 84 |
| Tracking Sensitivity (dBm) | -161 dBm |
| Avg Cold Start Time (s) | 27 |
| Warm Start Time (s) | 27 |
| Maximum Speed | 500 M/s |
| Dimensions (L x W x H) mm | Antenna - 25 x 25 x 7, GPS Board - 22 x 30 x 4 |
| Weight (g) | 12 |
| Cable Length | 10 |
| Shipping Weight | 0.016 kg |
| Shipping Dimensions | 8 × 6 × 4 cm |
What's in the box
- 1 x NEO-6M GPS Board
- 1 x Detachable Antenna
Frequently Asked Questions
What is the default baud rate of the NEO-6M module?
Can I use this module with a 5V Arduino?
Does the module include a backup battery?
Is this module compatible with APM 2.8?
What is the purpose of the EEPROM on this module?
What is included in the package?
Overview
The NEO-6M GPS Module with EPROM is a complete GPS receiver designed for drones, RC vehicles, and DIY electronics. Built around the u-blox NEO-6 chip, it offers 50 channels and SBAS support (WAAS, EGNOS, MSAS) for improved accuracy. The module includes a 25 x 25mm active antenna, a rechargeable backup battery, and EEPROM for storing settings. It communicates via UART TTL (TX, RX, VCC, GND) and operates from 2.7V to 6V, making it compatible with 3.3V and 5V systems.
Key Features
- 5Hz update rate: Provides position updates five times per second for responsive navigation.
- 2-meter accuracy: Suitable for drone position hold, return-to-home, and waypoint navigation.
- EEPROM: Saves your configuration so you don't need to reconfigure after power cycles.
- Backup battery: Maintains ephemeris data for faster satellite acquisition.
- Active antenna: 25 x 25mm patch antenna with 10cm cable for flexible mounting.
- Wide voltage input: 2.7V to 6V accommodates various power sources.
Specifications Explained
The NEO-6M receiver tracks up to 50 channels and supports GPS L1 frequency with C/A code. Its -161 dBm tracking sensitivity allows reliable signal reception even in challenging conditions. Cold start time is typically 27 seconds, and warm start is also 27 seconds, thanks to the backup battery. The module can handle speeds up to 500 m/s and operates between -24°C and 84°C. The board measures 22 x 30 x 4mm and weighs just 12g, while the antenna is 25 x 25 x 7mm. The UART TTL interface defaults to 9600 baud but is configurable from 4800 to 115200 baud using u-center software.
Compatibility and Requirements
This module works with any device that supports UART TTL communication, including Arduino boards, Raspberry Pi, and flight controllers like ArduPilot Mega v2. Note that it is not compatible with APM 2.8 flight controllers. A 3.3V or 5V power supply is required, and the module draws a small current. For configuration, you can use the u-center software on a Windows PC via a USB-to-TTL adapter (not included).
Typical Uses
Common applications include drone navigation (position hold, return-to-home, waypoint missions), Arduino GPS tracking projects, Raspberry Pi location logging, and RC vehicle telemetry. The module is also useful for timing applications and weather balloon tracking.
What's in the Box
- 1 x NEO-6M GPS Board
- 1 x Detachable Antenna

Quick specs
- Item Type
- GPS Module
- Model No. / Name
- Ublox NEO-6M
- Receiver Type
- 50 Channels, GPS L1 frequency, C/A Code, SBAS: WAAS, EGNOS, MSAS
- Input Voltage (V)
- 2.7 to 6
- Main Chip
- NEO-6
- Navigation Update Rate
- 5Hz













