
1 / 4 · Click to enlarge
AI Summary
A compact NEO-7M GPS module with EEPROM and active antenna for MWC and APM2.5 flight controllers. It retains settings when powered down and provides reliable positioning data for drone navigation.
Key Highlights
- NEO-7M chip for GPS positioning
- EEPROM saves settings when powered down
- Ceramic active antenna for signal reception
- LED indicator shows module status
- 3-5V supply voltage, 9600 bps baud rate
- Compact 23 x 30 mm footprint
Ideal For
- Drone builders using MWC flight controllers
- APM2.5 users adding GPS navigation
- FPV pilots needing position hold
- UAV hobbyists building compact multirotors
- Makers integrating GPS into robotics projects
Buying Tip
Confirm that your flight controller supports a 9600 bps GPS input and can supply 3-5V before purchasing.
Elecvora expert review
Our verdict
A practical GPS module for older MWC and APM2.5 builds, offering essential features like EEPROM and an active antenna at a low cost. It is not a high-precision unit but works well for basic navigation needs.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- EEPROM retains settings without power
- Integrated active antenna saves space
- Wide 3-5V input range
- Compact size fits small frames
Cons
- Limited to 9600 bps baud rate
- No mounting holes or case included
- Backup battery may require eventual replacement
Best for
Hobbyists using MWC or APM2.5 flight controllers who need basic GPS functionality.
Not ideal for
Users requiring high-update-rate GPS for racing or advanced autonomous missions.
Specifications
| Main Chip | NEO-7M |
|---|---|
| Supply Voltage | 3 to 5 |
| Baud Rate (bps) | 9600 |
| Length (mm) | 23 |
| Width (mm) | 30 |
| Shipping Weight | 0.017 kg |
| Shipping Dimensions | 6 × 5 × 2 cm |
What's in the box
- 1 x NEO-7M-000 NEO-7M GPS Module MWC GY-NEO 7M V2 Flight Control GPS Module EEPROM MWC APM2.5
Frequently Asked Questions
What flight controllers is this GPS module compatible with?
What is the power requirement for this module?
Does the module retain settings after power off?
What is included in the package?
What baud rate does the module use?
How should I care for the module?
Overview
The NEO-7M-000 GPS Module is a compact, ready-to-integrate GPS receiver designed for MultiWiiCopter (MWC) and APM2.5 flight control systems. At its core is the NEO-7M chip, a widely used GPS solution that provides positioning data for drone navigation. The module includes an EEPROM that stores configuration parameters even when power is removed, so you do not need to re-enter settings after each battery change. A ceramic active antenna helps capture satellite signals, and an LED indicator gives you a quick visual check of the module's status. With a 3-5V supply range and a fixed 9600 bps baud rate, it connects easily to compatible flight controllers.
Key Features
- NEO-7M chip: Provides reliable GPS positioning data for flight controllers.
- EEPROM storage: Saves configuration parameters when power is removed, so settings persist.
- Ceramic active antenna: Helps maintain signal quality for consistent reception.
- LED signal indicator: Offers a simple visual status check.
- Compact dimensions: 23 mm length and 30 mm width fit tight builds.
- Wide supply range: Operates from 3V to 5V, matching common flight controller outputs.
Specifications Explained
Main chip (NEO-7M): This is the GPS receiver engine that processes satellite signals and outputs position data. It is a common choice for drone navigation due to its balance of size and performance.
Supply voltage (3-5V): The module accepts a range of input voltages, making it compatible with the 3.3V and 5V pins found on many flight controllers. Always verify your controller's output before connecting.
Baud rate (9600 bps): This is the serial communication speed. Your flight controller's GPS port should be configured to 9600 bps to match.
EEPROM: The onboard memory retains settings such as baud rate and update rate without needing constant power. This is especially useful if you change defaults.
Dimensions (23 x 30 mm): The small footprint allows mounting on compact frames, and the ceramic antenna is integrated into the module.
Compatibility and Requirements
This module is designed for use with MWC (MultiWiiCopter) and APM2.5 flight control systems. It requires a 3-5V power supply and a serial connection at 9600 bps. Ensure your flight controller has a compatible GPS port and that you configure it to communicate at the correct baud rate. The module includes an active antenna, so no external antenna is needed. A data backup battery is present to maintain settings, but note that it may need replacement over time.
Typical Uses
This GPS module is suitable for drone and UAV applications where position hold, return-to-home, or waypoint navigation is desired. It is commonly used on multirotors running MWC or APM2.5 firmware. Because of its small size, it fits well on frames where space is limited. It can also be used in other projects that require a compact GPS receiver with serial output.
What's in the Box
Package includes: 1 x NEO-7M-000 NEO-7M GPS Module MWC GY-NEO 7M V2 Flight Control GPS Module EEPROM MWC APM2.5.
Quick specs
- Main Chip
- NEO-7M
- Supply Voltage
- 3 to 5
- Baud Rate (bps)
- 9600
- Length (mm)
- 23
- Width (mm)
- 30
- Shipping Weight
- 0.017 kg













