Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A compact 60 mm right-hand mecanum wheel with eight nylon-TPR rollers between two aluminium plates, rated for 3 kg per wheel. Its 45-degree roller layout lets a robot strafe sideways as well as drive forward and back.

Key Highlights

  • 60 mm outer diameter, 32 mm wide, 86 g per wheel
  • Eight nylon and TPR rollers on a 45-degree axis
  • Two aluminium plates, 2.5 mm thick, hold the roller axles
  • 3 kg load capacity per wheel for light robots
  • 5 mm holes accept M5 bolts with hex Nyloc nuts
  • Right-hand wheel pairs with left-hand units for strafing

Ideal For

  • Students building small omnidirectional robots
  • Makers prototyping mecanum drive platforms
  • LEGO robotics builders adding strafing movement
  • Hobbyists upgrading compact wheeled robots

Buying Tip

Remember this is the right-hand wheel, so order the matching left-hand unit if you are building a full set for strafing.

Elecvora expert review

Our verdict

A neatly built small mecanum wheel that brings sideways movement to lightweight robots at a modest weight. The aluminium plates and eight rollers feel appropriate for classroom and hobby use.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Compact 60 mm size suits small chassis
  • Light at 86 g per wheel
  • Eight rollers for smooth multidirectional motion
  • M5 mounting holes with Nyloc nuts

Cons

  • Right-hand only, so a left-hand wheel is needed for a set
  • 3 kg per-wheel limit restricts heavier builds
  • Motors, controllers and batteries are not included

Best for

Small omnidirectional robots and classroom builds

Not ideal for

Heavy payload platforms or outdoor rough terrain

Specifications

Length of Roller (mm)30
Load Capacity (Kg/Wheel)3
Size (mm)60
Weight (g)86
No. of Plates2
No. of Rollers per Wheel8
Outer Diameter (mm)60
Roller MaterialNylon+ TPR
Spacer materialNylon
Wheel Width (mm)32
Plate Thickness (mm)2.5
Diameter of Holes5 mm (M5 bolt compatible).
Nut TypeHex, Nyloc Nut.
Shipping Weight0.1 kg
Shipping Dimensions8 × 8 × 5 cm

What's in the box

  • 1 x 60mm Aluminium Mecanum Bearing Rollers Wheel, Right
  • 2 x Coupling
  • 3 x M3 x 35 Allen Bolts

Frequently Asked Questions

Is this a left or right mecanum wheel?
This is the right-hand version. A complete omnidirectional setup needs matching left-hand wheels as well.
How much weight can each wheel carry?
The load capacity is 3 kg per wheel, so keep the total robot weight within the combined rating of all wheels.
What bolts fit the mounting holes?
The holes are 5 mm in diameter and are compatible with M5 bolts, secured with hex Nyloc nuts.
Can I connect it to a motor?
Yes, universal hubs can be used to connect the wheel to a motor, and LEGO-compatible accessories are available for LEGO and servo motor connections.
What is included with the wheel?
You receive one right-hand 60 mm mecanum wheel, two couplings and three M3 x 35 Allen bolts. Motors, controllers and batteries are not included.
How should I care for the rollers?
Keep the rollers and axles clean and check the Nyloc nuts periodically so the plates and rollers stay secure.

Overview

The Nexus Robot 60mm Aluminium Mecanum Wheel is a right-hand wheel designed for small robots that need to move in more than one direction. Eight rollers made from nylon and TPR are mounted between two aluminium plates, each roller set at 45 degrees to the main rotational axis of the wheel. When a robot carries a matched set of wheels, that layout allows forward and backward travel as well as sideways strafing.

At 60 mm in outer diameter and 32 mm wide, this is a compact wheel that weighs just 86 g. The 3 kg per-wheel load capacity makes it suitable for lightweight chassis and tabletop robots rather than heavy platforms.

Key Features

  • Right-hand configuration: intended to be used alongside a left-hand wheel for correct omnidirectional movement.
  • Eight rollers per wheel: each roller is 30 mm long and made from nylon with TPR.
  • Twin aluminium plates: two 2.5 mm plates sandwich the roller axles for a rigid, compact build.
  • Nylon spacers: keep the rollers aligned between the plates.
  • M5 mounting holes: 5 mm holes are compatible with M5 bolts and hex Nyloc nuts.

Specifications Explained

The 60 mm outer diameter sets the ground clearance and speed characteristics of the robot, while the 32 mm wheel width keeps the contact patch narrow. Each of the eight rollers is 30 mm long, giving smooth contact as the wheel rolls and slides. The 3 kg per-wheel rating is a guide for the load carried by one wheel, so a four-wheel robot should be kept well within the combined figure. Plate thickness of 2.5 mm and nylon spacers contribute to the wheel's 86 g weight. The 5 mm holes take M5 bolts, and hex Nyloc nuts are specified for securing the wheel.

Compatibility and Requirements

The wheel is right-hand, so it should be matched with a left-hand mecanum wheel for a complete set. Mounting uses 5 mm holes with M5 bolts and hex Nyloc nuts. Universal hubs can be used to connect the wheels to a motor, and LEGO-compatible accessories are available for connecting to LEGO and servo motors. Drive motors, controller boards and batteries are not included and must be supplied separately.

Typical Uses

This wheel suits small mobile robots, classroom and hobby robotics projects, and compact platforms that need sideways movement in tight spaces. It is also useful for LEGO-based builds and for prototyping omnidirectional drive systems before scaling up.

What's in the Box

  • 1 x 60mm Aluminium Mecanum Bearing Rollers Wheel, Right
  • 2 x Coupling
  • 3 x M3 x 35 Allen Bolts

Quick specs

Length of Roller (mm)
30
Load Capacity (Kg/Wheel)
3
Size (mm)
60
Weight (g)
86
No. of Plates
2
No. of Rollers per Wheel
8
See all specifications