Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A compact 43 x 28 mm flight controller for small RC aircraft, with four switchable flight modes from Beginner to Expert. It supports single aileron, dual aileron, triangle and V-tail setups on a 5-6 V supply.

Key Highlights

  • Four switchable flight modes: Beginner, Practice, Intermediate and Expert
  • Supports single aileron, dual aileron, triangle and V-tail configurations
  • Compact 43 x 28 mm board weighing only 11 g
  • 5-6 V input with low 18 mA operating current
  • Works with ESCs that have a built-in BEC
  • Rated for 0-50 C operating temperatures

Ideal For

  • Hobbyists building micro and park-size fixed-wing models
  • Pilots moving from assisted flight to full manual control
  • Builders of V-tail and delta airframes
  • Makers repairing compact RC aircraft
  • Beginners who want switchable flight assistance

Buying Tip

Confirm your model's mounting area and your ESC's BEC output before ordering, since the board needs a regulated 5-6 V supply and measures only 43 x 28 mm.

Elecvora expert review

Our verdict

The NX4 EVO is a sensible, low-cost board for small aircraft that need switchable assistance without added bulk. Its narrow voltage window and absence of included accessories mean it rewards careful planning rather than plug-and-play expectations.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Four flight modes give a clear progression path
  • Supports several common wing and tail layouts
  • Very small and light at 43 x 28 mm and 11 g
  • Low 18 mA current draw

Cons

  • Requires a regulated 5-6 V supply
  • No cables or mounting hardware listed in the package
  • Limited published documentation for first-time builders

Best for

Small fixed-wing and mixed-layout models needing switchable flight assistance

Not ideal for

Large aircraft or builds needing a wide input voltage range

Specifications

Item TypeFlight Controller
Model No. / NameNX4 Revision 2.0
Input Voltage (V)05 to 06
Operating Current (mA)18
Operating Temperature (°C)0-50
Operating Frequency (Hz)100
Length (mm)43
Width (mm)28
Weight (g)11
Shipping Weight0.041 kg
Shipping Dimensions8.5 × 5.5 × 2 cm

What's in the box

  • 1 x NX4 EVO Flight Controller

Frequently Asked Questions

What voltage does the NX4 EVO need?
It accepts a 5-6 V input and draws about 18 mA. Use a regulated supply such as an ESC with a BEC rather than a raw battery pack.
Which airframe layouts are supported?
The board supports single aileron, dual aileron, triangle and V-tail configurations.
How many flight modes are there?
Four: Beginner, Practice, Intermediate and Expert. You can switch between them as your confidence changes.
What is included in the package?
One NX4 EVO Flight Controller. Cables, mounting hardware and documentation are not listed, so check your parts before building.
How big and heavy is the board?
It measures 43 mm by 28 mm and weighs 11 g, making it suitable for compact airframes.
What temperature range should I keep it in?
The rated operating range is 0-50 C. Avoid direct sun, closed vehicles and moisture exposure.

Overview

The NX4 EVO Flight Controller is a small stabilisation board intended for radio-controlled aircraft where space and weight are tight. At 43 mm long, 28 mm wide and just 11 g, it fits into micro and park-size airframes without demanding a large mounting area. The board is labelled NX4 Revision 2.0 and runs from a 5-6 V input while drawing roughly 18 mA.

Its most useful trait is the way it handles flight modes. Four levels are available: Beginner, Practice, Intermediate and Expert. A pilot can move up as confidence grows, or hand the model to a less experienced flyer with more assistance engaged.

Key Features

  • Four flight modes covering Beginner, Practice, Intermediate and Expert flying.
  • Flexible wing and tail support for single aileron, dual aileron, triangle and V-tail layouts.
  • Micro footprint of 43 x 28 mm and 11 g, suited to compact builds.
  • Simple power needs at 5-6 V input and about 18 mA operating current.
  • ESC compatibility with speed controllers that include a BEC.
  • Modest thermal range of 0-50 C for typical ground and flight conditions.

Specifications Explained

Input voltage and current

The 5-6 V input range means the board expects a regulated supply rather than a raw battery pack. The 18 mA operating current is low, so it places very little load on that supply. Plan your power arrangement around a source that stays inside the stated range.

Size and weight

At 43 x 28 mm and 11 g, the board suits models where a full-size controller would be awkward. Check the mounting area in your fuselage before ordering, and allow room for connectors and wiring.

Operating environment

The 0-50 C rating describes normal operating conditions. Avoid leaving the board in direct sun or in a closed vehicle, and protect it from moisture.

Operating frequency

The listed 100 Hz operating frequency is part of the published specification for this revision; treat it as a reference figure when planning your build.

Compatibility and Requirements

The controller supports single aileron, dual aileron, triangle and V-tail configurations, so it can be used across several common airframe layouts. It connects to ESCs that have a BEC, which simplifies power distribution in small models. A regulated 5-6 V supply is required, and the board should be kept within the 0-50 C operating range. No transmitter, receiver, ESC or airframe is included.

Typical Uses

This board suits small fixed-wing models, micro park flyers and lightweight airframes built around a V-tail or delta layout. It is also a reasonable option for a pilot who wants a single board that can grow from assisted flight into more direct control. Hobbyists repairing or refreshing a compact model will find the size and low current draw convenient.

What's in the Box

The package contains one NX4 EVO Flight Controller. No cables, mounting hardware or documentation are listed, so confirm what you already have before starting the build.

Quick specs

Item Type
Flight Controller
Model No. / Name
NX4 Revision 2.0
Input Voltage (V)
05 to 06
Operating Current (mA)
18
Operating Temperature (°C)
0-50
Operating Frequency (Hz)
100
See all specifications