Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A compact ADNS3080-based optical flow module that lets APM2.5, APM2.6 and APM2.8 flight controllers detect horizontal movement. It is a light, low-cost way to add position-hold sensing to a multicopter in well-lit conditions.

Key Highlights

  • ADNS3080 optical sensor detects horizontal movement
  • Designed for APM2.5, APM2.6 and APM2.8 flight controllers
  • Compact 35 x 25 x 30 mm plastic housing
  • Very light at roughly 0.02 kg shipping weight
  • Fixed-focus lens works beyond about 30 cm
  • Does not interfere with the MPU6000

Ideal For

  • Multicopter builders using APM2.5, APM2.6 or APM2.8 flight controllers
  • Hobbyists experimenting with optical flow and position sensing
  • RC and vehicle project makers adding movement detection
  • Makers working with Arduino-based sensor testing

Buying Tip

Before mounting, peel off the protective film and confirm the lens is open, then test the sensor in bright light at a distance of at least 30 cm.

Elecvora expert review

Our verdict

A focused, low-cost optical flow module for APM2.5, APM2.6 and APM2.8 builds. It is best suited to hobbyists who will take time to mount it correctly and test it in good light.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Small and light for tight multicopter frames
  • Based on the proven ADNS3080 sensor
  • Works with several APM flight controller versions
  • Does not interfere with the MPU6000

Cons

  • Only works in well-lit environments
  • Fixed focus cannot read objects closer than about 30 cm
  • Rotating the sensor will confuse readings

Best for

APM multicopter builders adding optical flow sensing

Not ideal for

Plug-and-play users wanting a sealed all-weather sensor

Specifications

Model No. / NameFlow Sensor
Memory Capacity1 GB Processor
MaterialPlastic
Dimensions (L x W x H) mm35 x 25 x 30
Shipping Weight0.02 kg
Shipping Dimensions4 × 3 × 3 cm

What's in the box

  • 1 x Optical Flow Sensor V1.0

Frequently Asked Questions

Which flight controllers does this sensor work with?
It is designed for APM2.5, APM2.6 and APM2.8 flight controllers. It does not interfere with the MPU6000.
Do I need to remove anything before use?
Yes. Open the lens and remove the protective film before testing or flying.
Why does the sensor need good lighting?
The optical sensor reads surface detail, so it only works properly in well-lit environments. Dim conditions can produce unreliable readings.
How close can the sensor be to the ground?
The fixed-focus lens cannot focus on objects closer than about 30 cm, so keep the surface at that distance or further.
What is included in the package?
The package includes one Optical Flow Sensor V1.0.
Can I rotate the sensor?
No. Rotating the sensor will confuse it, so mount it firmly and keep its orientation stable.

Overview

The Optical Flow Sensor V1.0 is a small sensor module for multicopter builders running APM2.5, APM2.6 or APM2.8 flight controllers. It uses the ADNS3080 optical sensor, the same sensor family found in computer mice, to read horizontal movement across the ground or another surface. The flight controller can then use that movement data as part of its position and drift sensing.

This is a workshop component rather than a plug-and-play accessory. It rewards careful mounting, good lighting and correct configuration, and it is a practical choice for hobbyists who enjoy tuning a build.

Key Features

  • ADNS3080 sensing: reads horizontal motion for the flight controller.
  • APM compatibility: made for APM2.5, APM2.6 and APM2.8 boards.
  • Compact size: 35 x 25 x 30 mm plastic body fits tight frames.
  • Lightweight: about 0.02 kg shipping weight, so it barely affects balance.
  • Fixed-focus lens: designed for working distances beyond roughly 30 cm.
  • No MPU6000 conflict: the sensor does not interfere with the MPU6000.

Specifications Explained

The 35 x 25 x 30 mm dimensions describe a small rectangular module that can be mounted on a frame plate or bracket without a large footprint. At roughly 0.02 kg, it is light enough that most builds will not notice the added mass.

The listed 1 GB processor memory figure is part of the supplied specification set; treat it as a data point rather than a performance promise. The plastic housing keeps the board protected in normal hobby use but is not a sealed enclosure, so keep it away from moisture and impact.

The fixed-focus lens is an important practical detail. It cannot focus on objects closer than about 30 cm, so the sensor needs a clear view of the ground or surface at that distance or more. It also needs a well-lit environment to work properly.

Compatibility and Requirements

The sensor is intended for APM2.5, APM2.6 and APM2.8 flight controllers. It does not interfere with the MPU6000. A well-lit environment is required, and the lens must be uncovered before use. Rotating the sensor in flight will confuse it, so mount it firmly and keep its orientation stable.

Typical Uses

This module is used in multicopters and remote control projects where horizontal movement detection is useful. It also appears in vehicle and remote control toy builds, upgrade parts and accessories, mobile detection level work, and remote control peripherals and devices. It is a common choice for builders experimenting with position sensing and optical flow data.

What's in the Box

The package includes one Optical Flow Sensor V1.0.

Quick specs

Model No. / Name
Flow Sensor
Memory Capacity
1 GB Processor
Material
Plastic
Dimensions (L x W x H) mm
35 x 25 x 30
Shipping Weight
0.02 kg
Shipping Dimensions
4 × 3 × 3 cm
See all specifications