
1 / 6 · Click to enlarge
At a glance
Made by Orange, this rotary encoder is a good fit for everyday home and hobby use. Main specs: model no. / name Magnetic Encoder; pulse per revolution (ppr) 600; counts per revolution (cpr) 2400.
Key Highlights
- Model No. / Name: Magnetic Encoder
- Pulse Per Revolution (PPR): 600
- Counts Per Revolution (CPR): 2400
Ideal For
- Everyday use
Buying Tip
Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.
Specifications
| Model No. / Name | Magnetic Encoder |
|---|---|
| Pulse Per Revolution (PPR) | 600 |
| Counts Per Revolution (CPR) | 2400 |
| Operating Temperature (°C) | -24 to 84 |
| Output Phase | A-B-Z |
| Protection Standard | IP54 |
| Shaft Type | Solid, D Type |
| Shaft Length (mm) | 12 |
| Shaft Diameter | 6 mm |
| Mounting Hole Diameter (mm) | M3 |
| Weight (g) | 160 |
| Dimensions (L x W x H) mm | 40 x 38.40 |
| Cable Length | 2 |
| Shipping Weight | 0.19 kg |
| Shipping Dimensions | 10 × 8 × 10 cm |
Overview
The Orange 600 PPR ABZ 3-Phase Incremental Magnetic Rotary Encoder, made by Orange, is listed in our rotary encoder range and suits everyday home and hobby use. The notes below explain the main specifications and what to check before you order.
Specifications explained
- Model No. / Name: Magnetic Encoder
- Pulse Per Revolution (PPR): 600
- Counts Per Revolution (CPR): 2400
- Operating Temperature (°C): -24 to 84
- Output Phase: A-B-Z
- Protection Standard: IP54 (the IP code tells you how much dust and water the casing keeps out)
- Shaft Type: Solid, D Type
- Shaft Length (mm): 12 (measure your mounting space before ordering)
Before you order
Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.
The Encoder comes with a Standard 2-meter long cable which can be extended with extra cable if needed.
Consider Adding Pull up resistor to All A-B-Z phases of the encoder output to avoid the effect of interference in output and get the precise logical output value from the encoder. Also adding a pull-up resistor to all phase output lines protects the open collector output-triode from damage due to direct Vcc supply short circuit.
Note: A sample tutorial code has been given in the Description.Power and Input Terminal Assignments:
| Terminal Name | Wire Color | Description |
| Phase A | White | Quadrature encoded output A |
| Phase B | Green | Quadrature encoded output B |
| Phase Z | Yellow | Quadrature encoded output Z |
| VCC | Red | VCC should be connected to +ve 5V of supply |
| GND | Black | The ground should be connected to negative the supply |
| Shield | Golden | The shield should be connected to GND |
Features :
- High cost-efficient advantages.
- Incremental rotary encoder internal adopts ASIC devices
- High reliability, long life
- Anti-jamming performance
- Small size, lightweight, compact structure
- Easy installation
- Stainless steel shaft, High resolution, High quality, line interface with waterproof protection
Useful Link:
https://electricdiylab.com/how-to-connect-optical-rotary-encoder-with-arduino/Tutorial Code:
//these pins can not be changed 2/3 are special pins int encoderPin1 = 2; int encoderPin2 = 3; volatile int lastEncoded = 0; volatile long encoderValue = 0; long lastencoderValue = 0; int lastMSB = 0; int lastLSB = 0; void setup() { Serial.begin (9600); pinMode(encoderPin1, INPUT); pinMode(encoderPin2, INPUT); digitalWrite(encoderPin1, HIGH); //turn pullup resistor on digitalWrite(encoderPin2, HIGH); //turn pullup resistor on //call updateEncoder() when any high/low changed seen //on interrupt 0 (pin 2), or interrupt 1 (pin 3) attachInterrupt(0, updateEncoder, CHANGE); attachInterrupt(1, updateEncoder, CHANGE); } void loop(){ //Do stuff here Serial.println(encoderValue); delay(1000); //just here to slow down the output, and show it will work even during a delay } void updateEncoder(){ int MSB = digitalRead(encoderPin1); //MSB = most significant bit int LSB = digitalRead(encoderPin2); //LSB = least significant bit int encoded = (MSB << 1) |LSB; //converting the 2 pin value to single number int sum = (lastEncoded << 2) | encoded; //adding it to the previous encoded value if(sum == 0b1101 || sum == 0b0100 || sum == 0b0010 || sum == 0b1011) encoderValue ++; if(sum == 0b1110 || sum == 0b0111 || sum == 0b0001 || sum == 0b1000) encoderValue --; lastEncoded = encoded; //store this value for next time }
Package Includes :
1 x Orange 600 PPR ABZ 3-Phase Incremental Magnetic Rotary Encoder 4 x 4.7KΩ Resistors for pull-ups 1 x Mounting Screw SetQuick specs
- Model No. / Name
- Magnetic Encoder
- Pulse Per Revolution (PPR)
- 600
- Counts Per Revolution (CPR)
- 2400
- Operating Temperature (°C)
- -24 to 84
- Output Phase
- A-B-Z
- Protection Standard
- IP54




















