
1 / 4 · Click to enlarge
AI Summary
A 45-piece assortment of flat dial DIP switches covering every pin count from 1 to 9 on a 2.54mm pitch. The compartmented box keeps all nine sizes sorted, so you always have the right switch on hand.
Key Highlights
- 45 switches total, five of each 1 to 9 pin size
- Standard 2.54mm pitch for breadboards and PCBs
- 24V DC rated with 50mΩ contact resistance
- Gold-plated phosphor bronze terminals for stable contact
- Insulation resistance of 1000MΩ between circuits
- Compartmented plastic storage box included
Ideal For
- Electronics hobbyists building breadboard prototypes
- Students learning through-hole soldering and circuit configuration
- Repair technicians keeping bench spares for address and mode switches
- Makers setting configuration options on microcontroller modules
- Small production runs needing a mixed switch assortment
Buying Tip
Check your board's pin spacing before ordering: the kit is 2.54mm pitch, so confirm your footprint matches rather than assuming it will fit a different grid.
Elecvora expert review
Our verdict
A well-organised mixed assortment that removes the guesswork of ordering individual DIP switches, with sensible ratings for low-voltage logic work. The gold-plated terminals and storage box make it a practical long-term bench item.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Nine pin counts in one box, five of each
- Standard 2.54mm pitch fits common boards
- Gold-plated phosphor bronze terminals
- Clear compartmented storage box
- Rated across -30°C to 85°C
Cons
- Limited to 24V DC low-voltage circuits
- No datasheet or pinout card in the box
- Soldering required for permanent installation
Best for
Hobbyists and technicians who regularly set configuration switches on prototype boards
Not ideal for
Mains-voltage switching or high-current power circuits
Specifications
| Model No. / Name | Dial Switch |
|---|---|
| Item Type | Kit |
| Rated Voltage (VDC) | 24 |
| Contact Resistance (ohm) | 50mΩ |
| Insulation Resistance (MOhm) | 1000 |
| Operating Temperature (°C) | -30 to 85 |
| Shipping Weight | 0.068 kg |
| Shipping Dimensions | 12.5 × 6.5 × 2 cm |
What's in the box
- 5 x 1 pin flat dial switch
- 5 x 2 pin flat dial switch
- 5 x 3 pin flat dial switch
- 5 x 4 pin flat dial switch
- 5 x 5 pin flat dial switch
- 5 x 6 pin flat dial switch
- 5 x 7 pin flat dial switch
- 5 x 8 pin flat dial switch
- 5 x 9 pin flat dial switch
- 1 x plastic storage box
Frequently Asked Questions
What pin counts are included in the kit?
What voltage can these switches handle?
Will they fit a standard breadboard?
Do the switches come with a storage box?
What are the terminals made of?
How should I clean and store the switches?
Overview
The Orange Pro-Range 45-piece flat dial DIP switch kit is a bench-ready assortment built around one simple idea: every common pin count in one box. Instead of ordering single switches each time a project needs a different number of settings, you get five switches for each configuration from 1 pin up to 9 pins. All of them sit on a 2.54mm pitch, so they drop into standard prototyping boards, perfboard and through-hole PCB layouts.
The switches are rated for 24V DC operation and use gold-plated phosphor bronze terminals, which help maintain a stable connection through repeated use and soldering. The set arrives in a compartmented plastic storage box that keeps the nine sizes separated and protected in a drawer or tool bag.
Key Features
- Complete range: 45 switches covering 1, 2, 3, 4, 5, 6, 7, 8 and 9 pin flat dial types.
- Standard pitch: 2.54mm spacing matches common breadboards and through-hole prototyping boards.
- Electrical stability: 50mΩ contact resistance and 1000MΩ insulation resistance support clean signal switching.
- Wide temperature window: rated from -30°C to 85°C for use in varied environments.
- Organised storage: a durable plastic box with separate compartments for each size.
Specifications Explained
Rated voltage (24V DC): the switches are intended for low-voltage DC control and signal circuits, not mains wiring. Contact resistance (50mΩ): a low value here means less voltage drop across closed contacts, which matters when switching logic-level signals. Insulation resistance (1000MΩ): high isolation between separate circuits helps prevent leakage between adjacent settings. Operating temperature (-30°C to 85°C): covers typical indoor electronics, outdoor enclosures and most workshop conditions. 2.54mm pitch: the pin spacing matches the most common prototyping grid, so no adapter is needed.
Compatibility and Requirements
The 2.54mm pitch suits standard breadboards, perfboard and through-hole PCB footprints. The 24V DC rating means the kit is intended for low-voltage DC circuits; it is not designed for mains voltage. Soldering equipment is required for permanent board installation, and a small flat screwdriver is useful for setting the dial positions.
Typical Uses
- Setting device addresses and configuration options on microcontroller boards.
- Selecting modes on small modules and prototype circuits.
- Teaching electronics classes and soldering practice.
- Bench spares for repair and maintenance work.
What's in the Box
- 5 x 1 pin flat dial switch
- 5 x 2 pin flat dial switch
- 5 x 3 pin flat dial switch
- 5 x 4 pin flat dial switch
- 5 x 5 pin flat dial switch
- 5 x 6 pin flat dial switch
- 5 x 7 pin flat dial switch
- 5 x 8 pin flat dial switch
- 5 x 9 pin flat dial switch
- 1 x durable plastic storage box
Quick specs
- Model No. / Name
- Dial Switch
- Item Type
- Kit
- Rated Voltage (VDC)
- 24
- Contact Resistance (ohm)
- 50mΩ
- Insulation Resistance (MOhm)
- 1000
- Operating Temperature (°C)
- -30 to 85


















