
1 / 4 · Click to enlarge
At a glance
Made by ORQA, this fpv and telemetry transmitter-receivers is a good fit for makers, students and electronics hobbyists. Main specs: weight (g) 80; display 0.96” Monochrome OLED; sensitivity Best In Class (stable image at close to -100dBm). Check that your power source supplies 5.0V nominal before connecting it.
Key Highlights
- Weight (g): 80
- Display: 0.96” Monochrome OLED
- Sensitivity: Best In Class (stable image at close to -100dBm)
Ideal For
- Building or repairing a model
- Upgrading flight performance
- Spares for the field
Buying Tip
Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.
Specifications
| Weight (g) | 80 |
|---|---|
| Display | 0.96” Monochrome OLED |
| Sensitivity | Best In Class (stable image at close to -100dBm) |
| Antenna Connector Type | 2x Standard SMA (not RP-SMA) |
| Current consumption | 350mA at 5V with both modules enabled < 300mA in low-power mode |
| Frequency Range | 5.3-6.0GHz |
| Input Voltage | 5.0V nominal |
| Shipping Weight | 0.058 kg |
| Shipping Dimensions | 9 × 6 × 4 cm |
Overview
The Orqa RapidFIRE 5.8GHz FPV VRX Module with Dual Signal Processing, made by ORQA, is listed in our fpv and telemetry transmitter-receivers range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.
Specifications explained
- Weight (g): 80 (important for drones, RC models and anything you carry)
- Display: 0.96” Monochrome OLED (measured diagonally; compare with the space you have before ordering)
- Sensitivity: Best In Class (stable image at close to -100dBm)
- Antenna Connector Type: 2x Standard SMA (not RP-SMA) (confirm your cable or board uses the same connector)
- Current consumption: 350mA at 5V with both modules enabled < 300mA in low-power mode (your supply must deliver at least this much current)
- Frequency Range: 5.3-6.0GHz (quoted range is usually line-of-sight; walls and interference shorten it)
- Input Voltage: 5.0V nominal (match this to your power supply; too high a voltage can damage the part)
- Shipping Weight: 0.058 kg (important for drones, RC models and anything you carry)
Before you order
Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.
Experience unmatched FPV video clarity with the Orqa RapidFIRE 5.8GHz FPV VRX Module, the gold standard in VRX reception.
Designed with advanced signal processing, it intelligently blends signals from dual receivers to deliver crystal-clear, interference-free video even in challenging environments. Whether flying indoors, racing, or exploring long-range outdoor locations, rapidFIRE ensures stable and reliable performance.
Its intuitive OLED interface, built-in spectrum tools, and future-ready USB updates make it a powerful companion for serious FPV pilots. Seamlessly compatible with leading FPV goggles, it enhances every flight with superior signal stability, reduced noise, and a truly immersive viewing experience.
Features:
- Advanced Signal Processing : Combines dual receiver signals for ultra-clear and stable video output.
- Interference-Free Performance : Eliminates tearing and rolling for a smooth FPV experience.
- Built-in Spectrum Analyzer: Scan channels, detect signals, and optimize frequency selection easily.
- OLED Display Interface : 0.96” screen with intuitive UI for easy navigation and real-time feedback.
- 5-Way Joystick Control: Simple and precise control over settings and channel selection.
- Wide Compatibility: Works seamlessly with Orqa FPV goggles and FatShark Dominator series.
- USB Firmware Updates :Stay future-ready with easy updates via USB and configuration tools.
- Multi-Mode Operation : Supports rapidFIRE modes, diversity mode, and power-saving mode.
Package Includes:
1 x Orqa RapidFIRE 5.8GHz FPV VRX Module with Dual Signal ProcessingQuick specs
- Weight (g)
- 80
- Display
- 0.96” Monochrome OLED
- Sensitivity
- Best In Class (stable image at close to -100dBm)
- Antenna Connector Type
- 2x Standard SMA (not RP-SMA)
- Current consumption
- 350mA at 5V with both modules enabled < 300mA in low-power mode
- Frequency Range
- 5.3-6.0GHz















