Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A compact 150V, 5A, 400W programmable DC power supply with 0.05% accuracy and a 2.8-inch IPS display. USB, RS232/RS485 and LAN connectivity let you run it manually on the bench or integrate it into automated test systems.

Key Highlights

  • 150V, 5A and 400W constant power output range
  • 0.05% accuracy with 2.8-inch IPS LCD readout
  • OVP, OCP and OTP protection with built-in discharge circuit
  • USB, RS232/RS485 and LAN with SCPI and Modbus support
  • Fast transient recovery of 5ms or less
  • Slim 226 x 142 mm body weighing about 1.6 kg

Ideal For

  • Electronics engineers testing circuits up to 150V
  • Production line technicians running repeatable verification
  • Repair workshops needing a current-limited bench source
  • Test system integrators using SCPI or Modbus control
  • Makers and developers working with higher-voltage modules

Buying Tip

Confirm you have a compatible mains power cord before first use, since import restrictions mean one may not be supplied with your order.

Elecvora expert review

Our verdict

The SPE15054 fills a useful gap between low-voltage bench supplies and large programmable units, offering 150V and 400W in a slim, portable chassis. Its protection set and remote interfaces make it a practical choice for both manual bench work and automated testing.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • 150V, 5A and 400W range covers a broad set of test scenarios
  • 0.05% accuracy with a clear 2.8-inch IPS display
  • OVP, OCP and OTP protection plus a built-in discharge circuit
  • USB, RS232/RS485 and LAN with SCPI and Modbus support
  • Compact 226 x 142 mm body at about 1.6 kg

Cons

  • Power cord may not be included due to import restrictions
  • No battery or internal storage for portable operation
  • LAN functionality should be confirmed against the exact configuration ordered

Best for

Bench and automated testing that needs up to 150V at moderate current

Not ideal for

High-current low-voltage work beyond the 5A and 400W limits

Specifications

Item TypePower Supply
Model No. / NameSPE15054
Output Voltage0–150
Output Current (A)0–5
Output Power (W)400
Accuracy≤0.05%
Display2.8-inch IPS LCD (240×320 pixels)
ProtectionOVP (0–155V), OCP (0–6A), OTP (85℃)
Ripple and Noise≤150mVpp (V), ≤30mA (I)
CommunicationUSB, RS232/RS485, LAN
Cooling FanIntelligent fan cooling
Length (mm)226
Width (mm)142
Weight (g)1600
Shipping Weight2.369 kg
Shipping Dimensions35 × 20 × 14 cm

What's in the box

  • 1 x OWON SPE15054 Power Supply
  • 1 x Power Cord
  • 1 x 10A 250V Fuse
  • 1 x Micro USB Data Cable
  • 1 x User Manual

Frequently Asked Questions

What output range does the SPE15054 provide?
It delivers 0–150V and 0–5A within a maximum output power of 400W. Because it is a constant power supply, the available current falls as the voltage setting rises.
Is a power cord included?
The package list includes a power cord, but import restrictions may mean one is not supplied with your order. Check before first use and purchase a suitable cord separately if needed.
How can I control the supply remotely?
It offers USB, RS232/RS485 and LAN interfaces supporting SCPI and Modbus protocols. This allows control from a PC or integration into an automated test system.
What protection features are built in?
Overvoltage protection is adjustable from 0–155V, overcurrent protection from 0–6A, and over-temperature protection trips at 85°C. A discharge circuit also clears residual output voltage after shutdown.
How clean is the output?
Ripple and noise are specified at 150mVpp or less on voltage and 30mA or less on current, with transient recovery within 5ms.
What is included in the box?
You receive the SPE15054 power supply, a power cord, a 10A 250V fuse, a micro USB data cable and a user manual.

Overview

The OWON SPE15054 is a programmable DC power supply built for bench and rack use where a wide voltage range and dependable regulation matter. It provides 0–150V and 0–5A within a 400W constant power envelope, so it can serve low-voltage logic circuits and higher-voltage assemblies from the same instrument. Digital control holds accuracy to 0.05%, and the 2.8-inch IPS LCD (240 x 320 pixels) presents settings and live readings clearly.

The chassis measures 226 mm long and 142 mm wide at roughly 1.6 kg, which keeps it portable enough to move between a lab bench, a repair station and a production line.

Key Features

  • Wide output range: 0–150V and 0–5A with 400W maximum output power.
  • Precise digital control: accuracy of 0.05% or better for repeatable test conditions.
  • Layered protection: overvoltage protection adjustable from 0–155V, overcurrent protection from 0–6A and over-temperature protection at 85°C.
  • Clean output: ripple and noise held to 150mVpp on voltage and 30mA on current.
  • Remote control: USB, RS232/RS485 and LAN interfaces with SCPI and Modbus protocol support.
  • Intelligent cooling: the fan responds to load conditions rather than running at a fixed speed.
  • Discharge circuit: removes residual voltage from the output after shutdown.

Specifications Explained

The 150V ceiling covers tasks that 30V bench supplies cannot reach, such as higher-voltage modules and multi-cell packs, while the 5A limit and 400W cap define the practical load. Because the supply operates as a constant power source, high voltage settings reduce the available current and vice versa.

Ripple and noise figures indicate how steady the output stays under load: 150mVpp on the voltage rail and 30mA on current. Transient recovery within 5ms means the output returns to regulation quickly when a load steps up or down, which helps when testing circuits that switch suddenly.

OVP, OCP and OTP thresholds can be set within the stated ranges, giving a defined safety envelope around the device under test. The intelligent fan adjusts its speed to thermal demand, keeping acoustic noise lower during light loads.

Compatibility and Requirements

Remote operation is available over USB, RS232/RS485 and LAN using SCPI and Modbus commands, so the unit can be driven by a PC or included in an automated test rack. Note that the power cord is not included due to import restrictions; a suitable cord must be purchased separately before first use.

Typical Uses

  • Laboratory bench testing of circuits and modules requiring up to 150V.
  • Production line verification and burn-in where repeatable settings are essential.
  • Repair and service work needing a controlled, current-limited source.
  • Automated test systems controlled over USB, serial or LAN.

What's in the Box

  • 1 x OWON SPE15054 Power Supply
  • 1 x Power Cord
  • 1 x 10A 250V Fuse
  • 1 x Micro USB Data Cable
  • 1 x User Manual

Quick specs

Item Type
Power Supply
Model No. / Name
SPE15054
Output Voltage
0–150
Output Current (A)
0–5
Output Power (W)
400
Accuracy
≤0.05%
See all specifications

More from OWON

View all →

Related Products

View all →