
1 / 3 · Click to enlarge
AI Summary
A 600W single-output bench supply adjustable from 0-60V and 0-10A with dual LED readouts and current limiting. It protects both the supply and your load with over-voltage, over-current, over-temperature and short-circuit safeguards.
Key Highlights
- 60V, 10A single output for up to 600W of adjustable DC power
- Three-digit LED display shows voltage and current readings clearly
- Current limiting protects the supply and connected load from damage
- Low ripple and noise with tight load and line stability
- Temperature-controlled fan runs quietly and dissipates heat effectively
- Compact 210 x 160 x 80 mm body weighing roughly 1.9 kg
Ideal For
- Electronics repair technicians testing and powering circuits
- Production-line and quality-control test benches
- Laboratories, research teams and teaching environments
- Makers and hobbyists charging batteries or running DC projects
Buying Tip
Check that your mains supply is AC 220V 50Hz before ordering, since the KPS6010D is specified for that input only.
Elecvora expert review
Our verdict
The KPS6010D packs a genuinely useful 60V/10A range into a small, light chassis with readable LED metering and sensible protection. It is a practical everyday bench supply for testing, repair and charging work within its 600W envelope.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Wide 0-60V and 0-10A adjustable range at 600W
- Low ripple and tight load stability for sensitive circuits
- Current limiting plus over-voltage, over-current and short-circuit protection
- Quiet temperature-controlled fan and compact 1.9 kg body
Cons
- Specified for AC 220V 50Hz input only
- Voltage resolution is 0.1V, so very fine millivolt settings are not possible
- Single output channel only
Best for
Repair benches, labs and production testing that need a stable adjustable DC source
Not ideal for
Users on 110V/120V mains or those needing multiple independent outputs
Specifications
| Output Voltage | 60 |
|---|---|
| Output Current (A) | 10 |
| Output Power (W) | 600 |
| Input Voltage | AC 220V ± 10% 50Hz |
| Stability | ≤0.3%+10mV Load stability rate: ≤0.5%+30mV |
| Ripple and Noise | ≤0.5%+10mV(rms) |
| Operating Temperature (°C) | 0°C~40°C; |
| Resolution | 0.1V |
| Display | Current value display: Three-digit LED digital tube (Accuracy±1% +1 word) |
| Storage Temperature (°C) | -20 ° C ~ 70 ° C; |
| Humidity Range | 10% ~ 90% RH |
| Dimensions (L x W x H) mm | 210 x 160 x 80 |
| Weight (g) | 1900 |
| Shipping Weight | 2.4 kg |
| Shipping Dimensions | 30 × 22 × 14 cm |
Frequently Asked Questions
What voltage and current can this supply deliver?
What input voltage does it require?
How does current limiting help?
What protections are built in?
How accurate is the display?
Can I use it for battery charging?
Overview
The WANPTEK KPS6010D is a high-power switching DC power supply built for bench and industrial work. It provides one continuously adjustable output spanning 0-60V and 0-10A, giving a maximum of 600W. Voltage and current are set directly on the front panel, and a three-digit LED digital tube displays the current value so you can confirm readings at a glance.
Inside, the supply uses PWM modulation for efficient conversion with low ripple and noise. A temperature-controlled cooling circuit drives the fan only as needed, so heat dissipation stays effective without constant fan noise. The unit measures 210 x 160 x 80 mm and weighs about 1.9 kg, making it easy to move between benches.
Key Features
- Adjustable 60V/10A output: one channel covers a wide range of test and charging tasks up to 600W.
- Dual digital display: read voltage and current values directly on the LED tube.
- Current limiting: caps output current to guard the supply and load against accidental damage.
- Multiple protections: over-voltage, over-current, over-temperature, overload and short-circuit safeguards.
- Stable, low-noise output: ripple and noise rated at 0.5%+10mV (rms).
- Intelligent cooling: temperature-controlled fan with low operating noise.
Specifications Explained
Output range: 0-60V and 0-10A give you headroom for everything from low-voltage logic boards to higher-voltage assemblies, with 600W available overall.
Stability: load stability is rated at 0.5%+30mV and general stability at 0.3%+10mV, so the output holds steady as the load changes. Ripple and noise of 0.5%+10mV (rms) keeps the DC output clean for sensitive circuits.
Resolution and display: voltage resolution is 0.1V, and the three-digit LED current display is accurate to about 1% plus one digit.
Environment: operate between 0C and 40C at 10-90% RH, and store between -20C and 70C.
Compatibility and Requirements
The KPS6010D is specified for AC 220V 10% input at 50Hz. Confirm your mains supply matches this before connecting. Output connects to your load through the front terminals; no additional accessories are required beyond your test leads.
Typical Uses
- Production-line testing and quality checks
- Electrical maintenance and repair work
- Product aging and burn-in tests
- Battery charging within the 60V/10A range
- Laboratory, research and teaching setups
- Any bench task needing a stable DC source
Quick specs
- Output Voltage
- 60
- Output Current (A)
- 10
- Output Power (W)
- 600
- Input Voltage
- AC 220V ± 10% 50Hz
- Stability
- ≤0.3%+10mV Load stability rate: ≤0.5%+30mV
- Ripple and Noise
- ≤0.5%+10mV(rms)















