
1 / 4 · Click to enlarge
AI Summary
A 100V/10A, 1000W adjustable switching DC power supply with dual LED displays and constant voltage or constant current operation. Two potentiometers let you set output precisely, while built-in overvoltage, overcurrent and short-circuit protection guard your load.
Key Highlights
- 100V, 10A output with 1000W maximum power
- Dual 0.56-inch LED display, 0.01V and 0.01A resolution
- Constant voltage and constant current modes
- Overvoltage, overcurrent, overload, over-temperature and short-circuit protection
- Temperature-controlled smart fan keeps noise low
- Compact 275 x 200 x 105 mm body weighing around 3 kg
Ideal For
- Electronics repair technicians testing and powering circuits
- Makers and hobbyists building DC projects
- Engineering students and teaching labs
- Production benches needing a stable single-output supply
- Anyone driving DC motors, LEDs or modules up to 1000W
Buying Tip
Check that your load's voltage and current fit within 100V and 10A, and remember the 1000W total limits how much voltage and current you can use together.
Elecvora expert review
Our verdict
The KPS10010D packs a genuinely useful 100V/10A range into a compact, quiet bench unit with clear dual displays and thorough protection. It is a sensible choice for anyone who needs an adjustable single-output supply without stepping up to a larger laboratory model.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Wide 0-100V and 0-10A adjustment range
- Clear four-digit LED display with fine resolution
- Constant voltage and constant current with current limiting
- Overvoltage, overcurrent, overload, over-temperature and short-circuit protection
- Low-noise temperature-controlled fan and compact 3 kg body
Cons
- Single output only, so one load at a time
- No remote control or programming interface listed
- 1000W ceiling limits combined high-voltage and high-current use
Best for
Electronics benches needing an adjustable 100V/10A DC source
Not ideal for
Users who need multiple independent outputs or remote programmability
Specifications
| Model No. / Name | KPS10010D |
|---|---|
| Output Voltage | 100 |
| Output Current (A) | 10 |
| Output Power (W) | 1000 |
| Operating Environment | (-10~45)C Rh<90% |
| Resolution | 0.1A, 0.1V |
| Rise Time | No load≤15ms Fully loaded≤30ms |
| Header display | 0.56 inch white four-digit digital tube display Display accuracy: 0.5%±3 words Display resolution: voltage 0.01V, current 0.01A |
| Dimensions (L x W x H) mm | 275 x 200 x 105 |
| Weight (g) | 3000 |
| Shipping Weight | 3.7 kg |
| Shipping Dimensions | 38 × 27 × 18 cm |
What's in the box
- 1 x WANPTEK KPS10010D 100V/10A adjustable switching DC power supply
- 1 x Power cord
- 1 x Instruction book
- 1 x Warranty card
Frequently Asked Questions
What voltage and current can the KPS10010D deliver?
How accurate is the display?
Does it protect the device I am testing?
What comes in the box?
Is it loud when running?
What are the size and weight?
Overview
The WANPTEK KPS10010D is a single-output adjustable switching DC power supply from the KPS series. It provides up to 100V, 10A and 1000W, with both voltage and current continuously adjustable from zero to the nominal value. A 0.56-inch white four-digit LED display lets you read output values directly, and the dual-potentiometer layout gives finer control when dialling in a setting.
Inside, the supply uses a switching design that keeps ripple low and voltage stable while remaining relatively light and compact. A temperature-controlled fan adjusts its speed to the load, so the unit runs quietly during light work and cools efficiently under heavier demand.
Key Features
- Wide adjustment range: 0-100V and 0-10A continuously variable, up to 1000W total output.
- Clear dual display: four-digit LED readout with 0.01V and 0.01A resolution and 0.5% plus 3-digit accuracy.
- Two operating modes: constant voltage and constant current, with current limiting to protect the load.
- Comprehensive protection: overvoltage, overcurrent, overload, over-temperature and short-circuit safeguards.
- Fast response: rise time of 15ms or less with no load and 30ms or less at full load.
- Workbench-friendly size: 275 x 200 x 105 mm and roughly 3 kg, with a low-noise smart fan.
Specifications Explained
Voltage, current and power
The 100V ceiling covers a broad range of DC work, from low-voltage logic circuits up to higher-voltage modules. The 10A limit and 1000W total mean you should keep an eye on the combined figure: for example, a 100V setting leaves around 10A available, while a lower voltage allows the same current ceiling but less total power draw. The 0.1V and 0.1A resolution figures describe the adjustment steps, while the display resolves to 0.01V and 0.01A for finer reading.
Constant voltage and constant current
In constant voltage mode the supply holds the set voltage and lets current follow the load. When the load tries to draw more than the current limit, the unit transitions to constant current and holds that limit instead, which helps prevent accidental damage to the device under test.
Operating environment
The rated operating range is -10 to 45 degrees Celsius at relative humidity below 90%, so it is suited to typical workshop and laboratory conditions rather than extreme environments.
Compatibility and Requirements
The KPS10010D runs from mains power using the supplied power cord. It has a single DC output, so it powers one load at a time. No battery, software or additional module is required to operate it; all settings are made with the front-panel potentiometers.
Typical Uses
- Bench testing and powering DC circuits, modules and prototypes
- Repair and diagnostics work on consumer electronics
- Driving DC motors, solenoids, LED arrays and similar loads
- Educational and hobby electronics projects needing a stable adjustable source
- General laboratory and production bench supply duties
What's in the Box
- 1 x WANPTEK KPS10010D 100V/10A adjustable switching DC power supply
- 1 x Power cord
- 1 x Instruction book
- 1 x Warranty card

Quick specs
- Model No. / Name
- KPS10010D
- Output Voltage
- 100
- Output Current (A)
- 10
- Output Power (W)
- 1000
- Operating Environment
- (-10~45)C Rh<90%
- Resolution
- 0.1A, 0.1V















