Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A compact bench instrument that combines a 30V/10A, 300W programmable DC power supply with a 4½-digit multimeter for powering and testing circuits. Its 10mV/1mA resolution and list waveform editing make repeatable, precise output sequences easy.

Key Highlights

  • Single-channel output up to 30V, 10A and 300W
  • Fine 10mV voltage and 1mA current resolution
  • List waveform editing with 10 programmable timing groups
  • Over-voltage and over-current protection for safer testing
  • Built-in 4½-digit multimeter for six measurement types
  • USB interface with SCPI protocol for remote control

Ideal For

  • Electronics engineers doing bench prototyping and validation
  • Repair technicians testing and powering small circuits
  • Students and educators in electronics labs
  • Makers and hobbyists building and debugging projects
  • Test engineers setting up USB/SCPI automated sequences

Buying Tip

Remember to order a compatible power cord separately, since import restrictions mean one is not included in the box.

Elecvora expert review

Our verdict

The SPE3103 packs a capable 30V/10A supply and a 4½-digit multimeter into one compact unit, which reduces clutter on a small bench. Its fine resolution and list waveform editing make it more flexible than a basic fixed supply.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Combines power supply and multimeter in one unit
  • Fine 10mV / 1mA resolution
  • List waveform editing with 10 timing groups
  • OVP/OCP protection and real-time curve monitoring
  • USB with SCPI for automation

Cons

  • Power cord not included due to import restrictions
  • Single channel only
  • No battery or wireless operation described

Best for

Bench prototyping, repair and automated test sequences

Not ideal for

Work needing multiple independent output channels

Specifications

Output Voltage0 - 30
Output Current (A)10
Output Power (W)300
Operating Temperature (°C)0-40
Length (mm)142
Width (mm)82
Weight (g)1533
Shipping Weight1.701 kg
Shipping Dimensions34 × 13 × 20 cm

What's in the box

  • 1 x OWON SPE3103 1 CH DC Power Supply - 30V, 10A, 300W
  • 1 x USB Cable
  • 1 x Fuse
  • 1 x Quick Guide

Frequently Asked Questions

Does the SPE3103 include a power cord?
No. Due to import restrictions, the power cord is not included, so you will need to purchase a suitable one separately.
What output range does it provide?
It supplies 0–30V and up to 10A, with a total output power of 300W.
Can I control it from a computer?
Yes. It has a USB interface supporting the SCPI protocol for remote control and automation.
What can the built-in multimeter measure?
It measures voltage, current, resistance, capacitance, continuity and diodes at 4½-digit accuracy.
How precise are the voltage and current settings?
Voltage resolution is 10mV and current resolution is 1mA.
What is list waveform editing used for?
It lets you program up to 10 timing groups so the output follows a repeatable sequence during a test.

Overview

The OWON SPE3103 is a single-channel DC power supply built for bench and field work, combining a 300W output stage with a 4½-digit digital multimeter in one compact housing. It supplies up to 30V and 10A, and the fine 10mV / 1mA resolution lets you set voltage and current with precision rather than in coarse steps.

Because the multimeter is integrated, you can power a circuit and take measurements without reaching for a second instrument. Real-time voltage and current curve monitoring adds a visual check on how the load responds during a test.

Key Features

  • 30V / 10A / 300W output for a wide range of low-voltage electronics work.
  • 10mV and 1mA resolution for accurate, repeatable settings.
  • List waveform editing with up to 10 programmable timing groups for sequenced output tests.
  • OVP and OCP protection to help prevent damage from over-voltage or over-current conditions.
  • 4½-digit multimeter measuring voltage, current, resistance, capacitance, continuity and diodes.
  • USB with SCPI protocol for remote control and automated test setups.

Specifications Explained

Output range: 0–30V and up to 10A gives you headroom for logic circuits, small motors, LED arrays and general prototyping, with 300W of total output power available.

Resolution: The 10mV voltage and 1mA current resolution means small adjustments are possible, which matters when a circuit is sensitive to slight changes in supply.

Operating temperature: Rated for 0–40°C, matching typical indoor lab and workshop conditions.

Size and weight: At 142mm long, 82mm wide and 1533g, the unit stays compact enough to move between bench and field use.

Compatibility and Requirements

The SPE3103 connects to a PC over USB and supports the SCPI protocol for remote control. Note that, due to import restrictions, a power cord is not included; please purchase a suitable power cord separately before use.

Typical Uses

  • Powering and debugging prototype circuits on the bench
  • Running sequenced output tests with list waveform editing
  • Checking voltage, current, resistance, capacitance, continuity and diodes with the built-in meter
  • Automated or remote test setups via USB and SCPI

What's in the Box

  • 1 x OWON SPE3103 1 CH DC Power Supply - 30V, 10A, 300W
  • 1 x USB Cable
  • 1 x Fuse
  • 1 x Quick Guide

Quick specs

Output Voltage
0 - 30
Output Current (A)
10
Output Power (W)
300
Operating Temperature (°C)
0-40
Length (mm)
142
Width (mm)
82
See all specifications

More from OWON

View all →

Related Products

View all →