
1 / 3 · Click to enlarge
AI Summary
The OWON SPE6103 is a programmable 60V/10A DC power supply with 300W output and USB SCPI control. Its 10mV/1mA resolution and four memory presets make precise, repeatable testing easy.
Key Highlights
- 0-60V and 0-10A output, 300W total power
- 10mV voltage and 1mA current setting resolution
- USB port supports SCPI commands for automation
- Four memory presets for quick parameter recall
- Overvoltage, overcurrent, and overheating protection
- Intelligent temperature-controlled fan for quiet cooling
Ideal For
- Electronics engineers bench-testing circuits
- R&D labs needing repeatable power settings
- Makers and hobbyists prototyping projects
- STEM educators demonstrating electrical principles
- Technicians performing automated test sequences
Buying Tip
Check that your intended load stays within the 60V/10A/300W envelope, and consider the 10mV/1mA resolution if you need fine adjustment for sensitive circuits.
Elecvora expert review
Our verdict
The OWON SPE6103 offers a practical mix of power, precision, and programmability in a compact chassis. Its 60V/10A range and fine resolution make it a versatile bench supply for many electronics tasks, though it lacks dual channels and advanced features found in higher-end models.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Wide 60V/10A output with 300W capacity
- Fine 10mV/1mA setting resolution
- USB SCPI support for automation
- Four memory presets for quick recall
- Comprehensive protection features
Cons
- Single channel only
- No battery or remote sense mentioned
- Basic display without advanced graphing
Best for
Engineers and makers needing a reliable, programmable single-channel supply for bench testing.
Not ideal for
Users requiring multi-channel outputs or high-precision laboratory-grade instrumentation.
Specifications
| Item Type | Programmable DC Power Supply |
|---|---|
| Model No. / Name | SPE6103 |
| Output Voltage | 0 - 60 |
| Channels | 1 |
| Output Current (A) | 10 |
| Rated output power | 300W |
| Noise (dB) | ≤5mVrms |
| Load Regulation | ≤30mV |
| Load Regulation Current | ≤20mA |
| Power Regulation Voltage | ≤30mV |
| Power Regulation Current | ≤20mA |
| Setting Resolution Voltage | 10mV |
| Setting Resolution Current | 1mA |
| Operating Temperature (°C) | 0-40 |
| Shipping Weight | 1.945 kg |
| Shipping Dimensions | 35 × 14 × 20 cm |
What's in the box
- 1 x OWON SPE6103 Programmable DC Power Supply
- 1 x Power Cord
- 1 x USB Cable for SCPI Communication
- 1 x Fuse
- 1 x Quick Guide
Frequently Asked Questions
What is the maximum output voltage and current?
Can I control it from a computer?
Does it have memory presets?
What protection features are included?
What is included in the box?
What is the setting resolution?
Overview
The OWON SPE6103 is a single-channel programmable DC power supply that delivers up to 60V and 10A, for a maximum output of 300W. Its slim, portable body and intuitive controls make it a practical bench instrument for electronics testing, prototyping, and educational experiments. The supply operates in constant voltage (CV) or constant current (CC) mode, automatically switching to protect the circuit under test.
Key Features
- Programmable control: Set voltage and current precisely via the front panel or through the USB device port using SCPI commands.
- Fine resolution: 10mV voltage steps and 1mA current steps allow accurate adjustment for sensitive loads.
- Memory presets: Four groups of shortcut parameters let you recall frequently used settings instantly.
- Protection suite: Overvoltage, overcurrent, and overheating protection help safeguard both the supply and your equipment.
- Quiet cooling: An intelligent temperature-controlled fan adjusts speed to reduce noise during operation.
- Power-on output setting: The supply can automatically restore output settings at power-up, useful for unattended setups.
Specifications Explained
Output range: 0-60V and 0-10A cover a broad set of low-voltage electronics, from logic circuits to motor drivers. The 300W rating is the maximum combined output power.
Regulation: Load regulation is ≤30mV and ≤20mA, while power regulation is also ≤30mV and ≤20mA, meaning the output stays stable when the load or input voltage changes.
Noise: Ripple and noise are specified at ≤5mVrms, which is suitable for most general-purpose testing.
Resolution: You can set voltage in 10mV increments and current in 1mA increments, giving fine control for precise experiments.
Operating conditions: The unit is rated for 0-40°C ambient temperature.
Compatibility and Requirements
The SPE6103 includes a USB device port for SCPI communication, allowing connection to a PC for remote control and automation. A USB cable is supplied. The power cord and fuse are also included. No additional software or drivers are specified in the product data; users should refer to the quick guide for setup details.
Typical Uses
This power supply is well suited to bench testing of electronic circuits, powering prototypes during development, and providing controlled voltage and current for educational demonstrations. Its programmable interface and memory presets make it useful for repetitive test sequences in small laboratories or workshops.
What's in the Box
- 1 x OWON SPE6103 Programmable DC Power Supply
- 1 x Power Cord
- 1 x USB Cable for SCPI Communication
- 1 x Fuse
- 1 x Quick Guide
Quick specs
- Item Type
- Programmable DC Power Supply
- Model No. / Name
- SPE6103
- Output Voltage
- 0 - 60
- Channels
- 1
- Output Current (A)
- 10
- Rated output power
- 300W
















