Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

This Pixhawk buzzer plugs directly into your flight controller via a DF13 connector and provides distinct audible tones for different flight modes. Its 50 dB volume and 190mm cable make it a simple, effective addition to any Pixhawk or PX4 setup.

Key Highlights

  • 50 dB volume for clear audible alerts
  • DF13 plug for direct connection to Pixhawk
  • 190mm wire length for flexible mounting
  • 30mm compact size and lightweight design
  • Emits different tones for various flight modes
  • Compatible with Pixhawk and PX4 autopilots

Ideal For

  • Pixhawk and PX4 autopilot users
  • Multirotor and fixed-wing builders
  • FPV pilots needing audible mode alerts
  • Drone enthusiasts adding status feedback
  • RC hobbyists tuning flight controllers

Buying Tip

Confirm that your flight controller has a 1.25-2P DF13 buzzer port before purchasing, as this buzzer is specifically designed for that interface.

Elecvora expert review

Our verdict

This Pixhawk buzzer is a simple, effective solution for adding audible status feedback to your autopilot setup. It connects easily and works as expected, though the 50 dB volume may be modest in noisy environments.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Plug-and-play DF13 connection
  • Clear distinct tones for different modes
  • Lightweight and compact
  • Adequate 190mm cable length
  • Low cost

Cons

  • 50 dB volume may be insufficient in loud conditions
  • Package contents and variant not clearly specified
  • Requires compatible Pixhawk or PX4 port

Best for

Pixhawk and PX4 users wanting basic audible mode alerts

Not ideal for

Those needing high-volume alerts or non-Pixhawk controllers

Specifications

Item TypeBuzzer
Volume50 dB
Interface1.25-2P plug
Connector TypeDF13 Plug
Wire Length(mm)190mm
Size (mm)30mm
Shipping Weight0.004 kg
Shipping Dimensions9 × 6 × 1 cm

Frequently Asked Questions

What is the purpose of this buzzer?
It provides audible tones that correspond to different flight modes and status changes on Pixhawk and PX4 autopilot systems, helping you stay aware of your aircraft's state.
Is this buzzer compatible with all flight controllers?
No, it is specifically designed for Pixhawk and PX4 autopilot systems that have a 1.25-2P DF13 buzzer port.
Does the buzzer require external power?
No, it draws power directly from the flight controller through the DF13 connection.
What is included in the package?
The package typically includes one buzzer with the integrated DF13 connector and cable. However, the manufacturer does not specify package contents, and the variant may vary.
How loud is the buzzer?
The volume is rated at 50 dB, which is moderate and suitable for close-range alerts but may be less audible in noisy environments.
Can I extend the wire length?
The wire is 190mm long. Extending it may require soldering or additional connectors, but this is not recommended as it could affect signal integrity.

Overview

The Pixhawk buzzer is a dedicated audio annunciator for Pixhawk and PX4 autopilot systems. It connects directly to the flight controller using a DF13 plug, allowing the autopilot to produce distinct tones that indicate different flight modes and status conditions. This small accessory is invaluable for pilots who need audible confirmation of mode changes, arming status, or other important events without looking at a ground station.

Key Features

  • Audible feedback: Emits different sounds that relate to different flight modes, helping you stay aware of your aircraft's state.
  • Simple connection: The DF13 plug mates directly with the buzzer port on Pixhawk and PX4 FMU boards.
  • Flexible mounting: A 190mm wire length gives you room to position the buzzer where it can be heard clearly.
  • Compact and light: At just 30mm in size and with a shipping weight of 0.004 kg, it adds negligible weight to your build.
  • 50 dB volume: Provides noticeable alerts without being excessively loud.

Specifications Explained

Volume: At 50 dB, the buzzer produces a moderate sound level that is audible in typical outdoor flying environments but not overwhelming. It is suitable for close-range feedback and pre-flight checks.

Interface and connector: The 1.25-2P plug with DF13 connector type ensures a secure, plug-and-play fit with compatible flight controllers. No soldering is required for connection.

Wire length: The 190mm cable provides enough slack to route the buzzer away from the flight controller, reducing the chance of obstruction or interference.

Size: With a 30mm diameter, the buzzer is compact enough to mount on most airframes without crowding other components.

Compatibility and Requirements

This buzzer is designed for use with Pixhawk and PX4 autopilot systems. It requires a compatible buzzer port on the flight controller, which is typically present on Pixhawk and PX4 FMU boards. No additional power source is needed; the buzzer draws power from the flight controller through the DF13 connection. Ensure that your flight controller has the appropriate 1.25-2P buzzer interface.

Typical Uses

This buzzer is commonly used in multirotor and fixed-wing builds running Pixhawk or PX4 firmware. It provides audible mode change notifications, arming/disarming tones, and other status alerts during flight operations. It is also useful during bench testing and configuration to confirm that the autopilot is responding correctly.

What's in the Box

Package contents are not specified by the manufacturer. The product typically ships as a single buzzer unit with the integrated DF13 connector and cable. Please refer to the product images for the exact variant you will receive.

Quick specs

Item Type
Buzzer
Volume
50 dB
Interface
1.25-2P plug
Connector Type
DF13 Plug
Wire Length(mm)
190mm
Size (mm)
30mm
See all specifications