Skip to main content

Worldwide Shipping · Secure Payments

At a glance

This rfid readers and writers is a good fit for makers, students and electronics hobbyists. Main specs: operating voltage (v) 3.3V ~ 5V; communication distance(m) 5cm~7cm; module size (lxwxh) mm 42.7 x 40.4 x 4 mm (LxWxH). Check that your power source supplies 3.3V ~ 5V before connecting it.

Key Highlights

  • Operating Voltage (V): 3.3V ~ 5V
  • Communication Distance(m): 5cm~7cm
  • Module Size (LxWxH) mm: 42.7 x 40.4 x 4 mm (LxWxH)

Ideal For

  • Everyday use

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

Operating Voltage (V)3.3V ~ 5V
Communication Distance(m)5cm~7cm
Module Size (LxWxH) mm42.7 x 40.4 x 4 mm (LxWxH)
Shipping Weight0.05 kg
Shipping Dimensions6 × 5 × 2 cm

Overview

The PN532 NFC RFID Reader Writer Module V0.0.1 is listed in our rfid readers and writers range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Operating Voltage (V): 3.3V ~ 5V (match this to your power supply; too high a voltage can damage the part)
  • Communication Distance(m): 5cm~7cm
  • Module Size (LxWxH) mm: 42.7 x 40.4 x 4 mm (LxWxH) (measure your mounting space before ordering)
  • Shipping Weight: 0.05 kg (important for drones, RC models and anything you carry)
  • Shipping Dimensions: 6 × 5 × 2 cm (measure your mounting space before ordering)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

The PN532 is a highly integrated transmission module for contactless communication at 13.56 MHz including microcontroller functionality based on an 80C51 core with 40 Kbytes of ROM and 1 Kbytes of RAM. The PN532 combines a modulation and demodulation concept completely integrated for different kinds of contactless communication methods and protocols at 13.56 MHz with an easy-to-use firmware for the different supported modes and the required host controller interfaces.

It works as RFID reader/writer,1443-A card or a virtual card and also supports NFC with Android phone. It is also compatible with Arduino.

Note : HW-147 on board working remains same .


Features:

  1. Support II2, SPI and HSU (High-Speed UART)
  2. I2C / UART: 3.3V ~ 24V TTL
  3. SPI: 3.3V TTL with 100-ohm resistors in series
  4. Communication distance: 5cm~7cm
  5. On-board level shifter, Standard 5V TTL for I2C and UART, 3.3V TTL SPI
  6. Work in NFC Mode or RFID reader/writer Mode
  7. RFID reader/writer supports:
  8. Plug and play, compatible
  9. Built-in PCB Antenna, with 4cm~6cm communication distance
  10. On-board level shifter, Standard 5V TTL for I2C and UART, 3.3V TTL SPI
  11. Work as an RFID reader/writer
  12. Work as a 1443-A card or a virtual card
  13. Exchange data with other NFC devices such as a smartphone

Package Includes:

1 x PN532 NFC RFID Reader Writer Module V0.0.1

Quick specs

Operating Voltage (V)
3.3V ~ 5V
Communication Distance(m)
5cm~7cm
Module Size (LxWxH) mm
42.7 x 40.4 x 4 mm (LxWxH)
Shipping Weight
0.05 kg
Shipping Dimensions
6 × 5 × 2 cm
See all specifications