
1 / 4 · Click to enlarge
AI Summary
A compact pneumatic mechanical valve with a roller actuator and 6 mm connector, rated for 1.5-8 kgf/cm2. Its aluminium body and multi-layer rubber sealing help deliver consistent switching with minimal air leakage.
Key Highlights
- Roller-type mechanical actuator for consistent, repeatable valve switching
- Pure aluminium valve body keeps the unit light at 83 g
- Multi-layer internal rubber sealing ring helps minimise air leakage
- High-precision lubricated valve stem for smooth stem movement
- Precision-threaded interface for a secure 6 mm pneumatic connection
- Rated for 1.5-8 kgf/cm2 and temperatures from -5 to 60 degrees C
Ideal For
- Industrial automation technicians building pneumatic control circuits
- Machine builders needing a compact roller-actuated air valve
- Workshop and maintenance teams servicing pneumatic equipment
- Makers and engineers assembling custom air control setups
- Anyone replacing a worn mechanical valve in an existing 6 mm air line
Buying Tip
Confirm your air line uses 6 mm tubing and that your supply pressure sits within 1.5-8 kgf/cm2 before ordering, since the included connector is sized for that tubing.
Elecvora expert review
Our verdict
A sensible small-format mechanical valve for builders who want roller actuation without electronics. The aluminium body, lubricated stem and multi-layer sealing are appropriate for routine pneumatic switching within the stated pressure and temperature limits.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Lightweight aluminium body at 83 g
- Roller actuator gives repeatable mechanical switching
- Multi-layer rubber sealing aimed at low air leakage
- Connector pair included for 6 mm tubing
- Compact 44 x 45 x 15 mm footprint
Cons
- Pressure range limited to 1.5-8 kgf/cm2
- Not intended for temperatures outside -5 to 60 degrees C
- Mechanical actuation requires a suitable moving part to contact the roller
Best for
Compact pneumatic control circuits needing roller-triggered switching
Not ideal for
High-pressure or extreme-temperature air systems
Specifications
| Shipping Weight | 0.11 kg |
|---|---|
| Shipping Dimensions | 7 × 5 × 02 cm |
What's in the box
- 1 x Pneumatic Mechanical Valve Roller Switch MOV-02+6mm
- 1 x Male connector pair
Frequently Asked Questions
What tubing size does this valve use?
What pressure range is it rated for?
Does it need electricity to operate?
What temperature can it handle?
What is included with the valve?
How should I maintain it?
Overview
The MOV-02+6mm is a mechanical pneumatic valve that uses a roller actuator to switch air flow inside a compressed air circuit. Instead of an electrical signal, it responds to physical contact, which makes it useful where a lever, cam or moving part needs to trigger a pneumatic action directly. The body is cast from pure aluminium, keeping the valve light at 83 g while giving it a compact 44 x 45 x 15 mm profile for crowded panels and manifolds.
Key Features
- Roller-type mechanical actuation: a rolling contact point switches the valve as parts pass or press against it.
- Pure aluminium body: lightweight construction suited to machine-mounted air control.
- Multi-layer rubber sealing ring: designed to keep air loss low across the internal sealing surfaces.
- Lubricated high-precision valve stem: supports smooth travel and consistent response over repeated cycles.
- Precision-threaded interface: provides a secure mounting point for the 6 mm connector.
Specifications Explained
The 6 mm connector diameter determines the tubing size the valve is built to accept, so match it to your existing 6 mm air line. The pressure range of 1.5-8 kgf/cm2 covers common workshop and machine air supplies; stay inside that band for reliable sealing and actuation. Operating temperature is listed at -5 to 60 degrees Celsius, so the valve is intended for normal indoor and sheltered industrial environments rather than extreme heat or freezing conditions. At 83 g and 44 x 45 x 15 mm, it adds little weight or bulk to a control assembly.
Compatibility and Requirements
The valve is supplied with a 6 mm connector and a male connector pair, so the matching fitting for that tubing size is included. It requires a compressed air supply within the stated pressure range and mechanical contact from a roller-compatible moving part to actuate. No electrical supply is needed for the valve itself.
Typical Uses
Common applications include industrial automation, pneumatic machinery, positioning fixtures, and air control setups where a mechanical roller trigger is preferred over a manual lever or electronic switch. It also suits small custom builds that need a compact, lightweight valve in a tight space.
What's in the Box
- 1 x Pneumatic Mechanical Valve Roller Switch MOV-02+6mm
- 1 x Male connector pair













