
1 / 4 · Click to enlarge
AI Summary
A compact 3/2 way push-pull hand valve with G1/8 ports and an aluminum alloy body for manual control of filtered compressed air. The push-pull action gives quick supply and exhaust switching for single-acting cylinders and small pneumatic circuits.
Key Highlights
- Push-pull manual control for quick supply and exhaust switching
- 3/2 way function suited to single-acting cylinders and actuators
- G1/8 ports for compact panel and inline installation
- Aluminum alloy body at about 102 g for light, rigid mounting
- Working pressure range of 0.15 to 0.8 MPa with 1.5 MPa proof pressure
- Panel or base mount design for tidy integration into control panels
Ideal For
- Machine tool operators needing local manual air control
- Technicians building or servicing single-acting pneumatic circuits
- Automation panel builders fitting compact 3/2 way hand valves
- Workshop and test rig users working with filtered compressed air
- Maintenance teams adding a manual override to small air lines
Buying Tip
Confirm your fittings and tubing are G1/8 and that your supply stays within 0.15 to 0.8 MPa, and fit an air filter upstream to protect the seals.
Elecvora expert review
Our verdict
A straightforward manual air valve that does one job well: giving an operator direct push-pull control of a small pneumatic circuit. Its aluminum body, G1/8 ports and 3/2 way layout make it a sensible fit for panels, test rigs and single-acting actuators.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Simple manual operation with no electrical supply needed
- Compact aluminum alloy body at about 102 g
- G1/8 ports suit common small pneumatic fittings
- 3/2 way function matches single-acting cylinders
- Panel or base mounting for tidy installation
Cons
- Only filtered compressed air should be used
- Not intended for pressures above the 0.8 MPa working range
- Manual operation is not suitable for remote or automated switching
Best for
Manual on/off air control in compact pneumatic panels and workshop circuits
Not ideal for
Remote, automated or high-pressure pneumatic systems
Specifications
| Item Type | Pneumatic Push-Pull Valve |
|---|---|
| Model No. / Name | 3R210-06 |
| Valve Type | Push-Pull |
| Function | 3/2 Way |
| Control Method | Push-Pull |
| Port Size | G1/8 |
| Working Medium | Filtered Compressed Air |
| Operating Pressure | 0.15 to 0.8 MPa |
| Proof Pressure | 1.5 MPa |
| Body Material | Aluminum Alloy |
| Mounting Type | Panel/Base Mount |
| Length | 8.63 cm |
| Width | 3.52 cm |
| Height | 2.22 cm |
| Weight (Kg) | 0.102 kg |
| Shipping Weight | 0.113 kg |
| Shipping Dimensions | 10 × 4 × 3 cm |
What's in the box
- 1 x Pneumatic Solenoid Air Valve Push-Pull Valve Hand Valve 3R210-06
Frequently Asked Questions
What does 3/2 way mean on this valve?
What pressure can the 3R210-06 handle?
Does the valve need electricity?
What thread size are the ports?
What air supply should I use?
What is included with the valve?
Overview
The 3R210-06 is a manual pneumatic valve operated by a push-pull handle. Each pull or push changes the valve state, so the operator can admit filtered compressed air to a circuit or shut it off and exhaust the downstream side. It uses a 3/2 way configuration with G1/8 ports, a common format for small actuators and compact control panels.
The body is made from aluminum alloy and measures approximately 8.63 cm long, 3.52 cm wide and 2.22 cm high, with a weight of about 0.102 kg. That combination keeps the valve rigid enough for panel fitting while adding little load to a machine frame or test fixture.
Key Features
- Push-pull operation: a direct manual action that needs no electrical supply or pilot line.
- 3/2 way function: one port supplies air and the other exhausts it, matching the needs of single-acting cylinders.
- G1/8 ports: a compact thread size that fits small fittings and tubing common in light pneumatic circuits.
- Aluminum alloy body: a metal housing that supports stable sealing and repeated manual use.
- Panel or base mounting: the valve can be fixed to a panel or base for a tidy, serviceable installation.
Specifications Explained
The working pressure range of 0.15 to 0.8 MPa defines the normal operating window. Below 0.15 MPa the valve may not switch or seal reliably, while staying within 0.8 MPa keeps wear and stress low. The proof pressure of 1.5 MPa is a test limit, not a working pressure, so the valve should not be run there.
G1/8 refers to the port thread, so choose fittings and tubing rated for the same thread and for the pressures you plan to use. The 3/2 way layout means the valve has a supply, an outlet and an exhaust path, which is why it suits single-acting actuators that need air on one side and a spring return.
Filtered compressed air is the specified medium. Dust, water and oil carryover can affect sealing and movement, so a filter upstream of the valve is important. The aluminum body keeps the unit light at roughly 102 g while remaining firm when mounted.
Compatibility and Requirements
Use the valve only with filtered compressed air within 0.15 to 0.8 MPa. Ports are G1/8, so matching fittings are required. The valve is manually operated and needs no electrical connection. Mounting is by panel or base, and the compact 8.63 x 3.52 x 2.22 cm body suits small enclosures and machine panels.
Typical Uses
- Manual air control on machine tools and workshop equipment
- Single-acting pneumatic cylinders and small actuators
- Packaging lines and automation panels needing local override
- Pneumatic test setups and inspection fixtures
- General workshop circuits where a simple on/off air control is useful
What's in the Box
1 x Pneumatic Solenoid Air Valve Push-Pull Valve Hand Valve 3R210-06.
Quick specs
- Item Type
- Pneumatic Push-Pull Valve
- Model No. / Name
- 3R210-06
- Valve Type
- Push-Pull
- Function
- 3/2 Way
- Control Method
- Push-Pull
- Port Size
- G1/8













