
1 / 3 · Click to enlarge
AI Summary
A 5 kg aluminium load cell bundled with an HX711AD 24-bit converter module, shell and 4P DuPont wire. It lets you turn applied force into a digital reading for DIY scales and force-sensing projects.
Key Highlights
- 5 kg capacity straight-bar load cell in aluminium alloy
- HX711AD module with 24-bit A/D conversion
- Rated output 1.0 ± 0.1 mV for reliable signal
- Non-linearity of 0.05% F.S for stable readings
- 18 cm lead cable plus 4P DuPont wire included
- Protective shell and DIY assembly kit
Ideal For
- Makers building DIY digital scales
- Students learning strain-gauge and A/D basics
- Hobbyists prototyping force-sensing gadgets
- Arduino-style project builders
- Workshops teaching sensor wiring
Buying Tip
Check that your project's maximum load stays within 5 kg and that you have a microcontroller ready, since neither a board nor a power supply is included.
Elecvora expert review
Our verdict
A tidy, low-cost starter kit that bundles the load cell, converter, shell and wiring needed for a first weighing project. It rewards a little patience with wiring and calibration but covers the essentials well.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Load cell, HX711AD module, shell and wire in one kit
- 24-bit conversion supports fine resolution
- Clear four-wire colour convention for wiring
- Aluminium alloy bar with 5 kg capacity
Cons
- Arrives in DIY form, so assembly is required
- No microcontroller or power supply included
- Small rated output needs amplification and calibration
Best for
Hobbyists and students building a first digital scale or force-sensing prototype
Not ideal for
Users wanting a plug-and-play, factory-calibrated scale
Specifications
| Cable Length | 18 |
|---|---|
| Rated Output | 1.0 0.1mV |
| Non Linear Output | 0.05% F.S |
| Converters | HX711 A |
| Shipping Weight | 0.05 kg |
| Shipping Dimensions | 8 × 4 × 2 cm |
What's in the box
- 1 x 5 kg load cell
- 1 x HX711AD module
- 1 x protective shell
- 1 x 4P DuPont wire
Frequently Asked Questions
What exactly is included in this kit?
How do I wire the load cell to the module?
What voltage does the load cell need?
Can I read the load cell without the HX711 module?
Is the kit assembled and calibrated?
How much weight can it measure?
Overview
This weighing sensor kit combines a 5 kg straight-bar load cell with an HX711AD converter module, a protective shell and a 4P DuPont wire. The load cell is a strain-gauge bar made from aluminium alloy: when force is applied, its internal resistance changes in proportion to the strain, producing a small output voltage. The HX711AD module then converts that signal into a digital value a microcontroller can read.
The kit arrives in DIY form, so you connect the load cell to the module and mount the parts yourself. That makes it a hands-on option for learners and makers who want to understand how digital weighing actually works.
Key Features
- 5 kg capacity bar load cell made from aluminium alloy, suited to light-to-medium force measurement.
- HX711AD 24-bit A/D converter for high-precision digitisation of the load cell signal.
- Rated output of 1.0 ± 0.1 mV and non-linearity of 0.05% F.S for consistent readings across the range.
- 18 cm cable on the load cell, plus a 4P DuPont wire for connecting to your board.
- Protective shell included to house the assembly.
Specifications Explained
Rated output (1.0 ± 0.1 mV) describes the signal the bar produces at full load. Because the figure is small, a dedicated amplifier like the HX711 is needed rather than reading the cell directly.
Non-linearity (0.05% F.S) indicates how closely the output tracks a straight line across the full scale. A lower value means the reading stays more predictable as force increases.
HX711 A converter refers to the module's 24-bit A/D chip, which turns the tiny analogue voltage into a digital number. The module provides on-chip active low-noise PGA with selectable gain, and a simple digital control and serial interface using pin-driven controls.
Compatibility and Requirements
The load cell has four lead wires intended for the HX711 module: red to E+, black to E-, green to A+ and white to A-. The module uses a simple serial interface with pin-driven control, so it works with microcontrollers that can drive those pins. Driving voltage for the load cell is 5–10 V. A microcontroller and suitable power source are not included and must be supplied separately.
Typical Uses
- DIY digital scales and kitchen-style weighing projects
- Force and pressure sensing in student or hobby prototypes
- Interactive installations that react to weight
- Testing rigs for small mechanical assemblies
What's in the Box
- 1 x 5 kg load cell
- 1 x HX711AD module
- 1 x protective shell
- 1 x 4P DuPont wire

Quick specs
- Cable Length
- 18
- Rated Output
- 1.0 0.1mV
- Non Linear Output
- 0.05% F.S
- Converters
- HX711 A
- Shipping Weight
- 0.05 kg
- Shipping Dimensions
- 8 × 4 × 2 cm













