
1 / 2 · Click to enlarge
At a glance
This load sensor is a good fit for makers, students and electronics hobbyists. Main specs: output type Digital; supply voltage 2.6 V-5.5 V; application DIY weighing scales and robotics and force measurement and educational electronics. Check that your power source supplies 2.6 V-5.5 V before connecting it.
Key Highlights
- Output Type: Digital
- Supply Voltage: 2.6 V-5.5 V
- Application: DIY weighing scales and robotics and force measurement and educational electronics
Ideal For
- Arduino, ESP32 and Raspberry Pi projects
- School and college lab work
- Prototypes and test rigs
Buying Tip
Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.
Specifications
| Pressure Range | 0 to 5 kg |
|---|---|
| Output Type | Digital |
| Supply Voltage | 2.6 V-5.5 V |
| Application | DIY weighing scales and robotics and force measurement and educational electronics |
| Connection | 4P DuPont |
| Module | HX711 A/D |
| Weight (Kg) | 0.05 kg |
| Shipping Weight | 0.09 kg |
| Shipping Dimensions | 18 × 14 × 3 cm |
Overview
The DIY Pressure Sensor Kit 5kg+ HX711AD Module + 4P DuPont Wire Shell ROHS is listed in our load sensor range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.
Specifications explained
- Pressure Range: 0 to 5 kg (quoted range is usually line-of-sight; walls and interference shorten it)
- Output Type: Digital
- Supply Voltage: 2.6 V-5.5 V (match this to your power supply; too high a voltage can damage the part)
- Application: DIY weighing scales and robotics and force measurement and educational electronics
- Connection: 4P DuPont
- Module: HX711 A/D
- Weight (Kg): 0.05 kg (important for drones, RC models and anything you carry)
- Shipping Weight: 0.09 kg (important for drones, RC models and anything you carry)
Before you order
Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.
Pressure Sensor,5kg+ HX711AD Module includes a straight bar load cell that converts applied pressure into an electrical signal. Made from aluminum alloy, it effectively measures force up to 5 kg. The kit features four lead wires for easy connection to the HX711 module, which outputs a voltage that varies with the applied force. Ideal for use with Arduino, it offers a simple digital control interface.
Features:
- On-chip low-noise PGA with selectable gain (3264, 128)
- Easy serial interface for programming
- Connects directly to load cell (wires color-coded for convenience)
- Utilizes a 24-bit high precision A/D converter (HX711)
Package include:
1 x Pressure Sensor,5kg+ HX711AD Module,+4P DuPont Wire + Shell, Weighing Electronic Weighing Sensor Kit DIYQuick specs
- Pressure Range
- 0 to 5 kg
- Output Type
- Digital
- Supply Voltage
- 2.6 V-5.5 V
- Application
- DIY weighing scales and robotics and force measurement and educational electronics
- Connection
- 4P DuPont
- Module
- HX711 A/D













