Skip to main content

Worldwide Shipping · Secure Payments

At a glance

This water quality sensors is a good fit for makers, students and electronics hobbyists. Main specs: model no. / name pH Sensor; range 0-14 pH; internal resistance (ohm) ≦250MΩ.

Key Highlights

  • Model No. / Name: pH Sensor
  • Range: 0-14 pH
  • Internal Resistance (Ohm): ≦250MΩ

Ideal For

  • Arduino, ESP32 and Raspberry Pi projects
  • School and college lab work
  • Prototypes and test rigs

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

Model No. / NamepH Sensor
Range0-14 pH
Operating Temperature (°C)0 to 80
Internal Resistance (Ohm)≦250MΩ
Response Time (uS)≦1min
Probe Length (m)Approx 1m
Weight (g)56
Additional Specs.Zero Point: 7±0.5 pH, Alkali Error: 0.2 pH, Theoretical Percentage Slope:≧98.5%
Shipping Weight0.07 kg
Shipping Dimensions24 × 4 × 4 cm

Overview

The Electrode Probe for Liquid pH Value Detection Sensor Module is listed in our water quality sensors range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Model No. / Name: pH Sensor
  • Range: 0-14 pH (quoted range is usually line-of-sight; walls and interference shorten it)
  • Operating Temperature (°C): 0 to 80
  • Internal Resistance (Ohm): ≦250MΩ
  • Response Time (uS): ≦1min
  • Probe Length (m): Approx 1m (measure your mounting space before ordering)
  • Weight (g): 56 (important for drones, RC models and anything you carry)
  • Additional Specs.: Zero Point: 7±0.5 pH, Alkali Error: 0.2 pH, Theoretical Percentage Slope:≧98.5%

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

This is Electrode Probe for Liquid pH Value Detection Sensor Module. Need to measure water quality and other parameters but haven't got any low-cost pH meter? Find it difficult to use with Arduino?

Here, we have Liquid pH Value Detection Sensor. This probe can be used with this pH sensor module.

The electrode is made of a pH glass electrode and a reference electrode combined composite electrode, which is pH meter measuring sensor for measuring the concentration of an aqueous solution of H (pH value), it is widely used in various fields to be detected in the pH.

The PH electrode has a single cylinder that allows direct connection to the input terminal of a PH meter, controller, or any PH device which has a BNC input terminal. The PH electrode probe is accurate and reliable that can give almost instantaneous readings.


Features :

  1. BNC Connector is suitable for most PH meter and controller.
  2. Suitable for a wide range of application: Aquariums, Hydroponics, Laboratory, etc.

Package Includes :

1 x Electrode Probe for Liquid pH Value Detection Sensor Module.

Quick specs

Model No. / Name
pH Sensor
Range
0-14 pH
Operating Temperature (°C)
0 to 80
Internal Resistance (Ohm)
≦250MΩ
Response Time (uS)
≦1min
Probe Length (m)
Approx 1m
See all specifications