
1 / 3 · Click to enlarge
AI Summary
The Generic YZC-516C is a 100kg S-type load cell made of alloy steel with a 2.0 mV/V output and IP66 protection. Its four-wire interface works with HX711 modules for weighing, force testing and automation projects.
Key Highlights
- 100kg capacity for tension and compression measurement
- Alloy steel construction with IP66 protection
- Rated output 2.0 ± 0.005 mV/V
- Hysteresis and repeatability of 0.03% FS
- Four-wire connection compatible with HX711
- Compact 51mm length with M4 and M5 mounting holes
Ideal For
- Engineers building industrial weighing or force-control systems
- Makers using Arduino and HX711 for load measurement
- Technicians maintaining grouping scales and packaging equipment
- Product designers prototyping tension or compression sensors
- Automation integrators needing a compact 100kg load cell
Buying Tip
Verify that your amplifier (such as an HX711 module) and mounting bolts (M4 and M5) are available, as neither is included with the load cell.
Elecvora expert review
Our verdict
The YZC-516C is a solid, no-frills 100kg S-type load cell that delivers stable output and easy integration for weighing and force projects. Its alloy steel body and IP66 rating make it suitable for demanding environments, provided you have the right amplifier and mounting hardware.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Dual tension and compression measurement
- Low hysteresis and repeatability for consistent results
- IP66 protection against dust and water
- Standard 2.0 mV/V output works with common HX711 modules
Cons
- Requires an external amplifier and microcontroller to read output
- Mounting bolts are not included
- No calibration certificate or detailed wiring diagram supplied
Best for
Weighing scales, force testing and industrial automation projects up to 100kg
Not ideal for
Applications requiring digital output or standalone operation without additional electronics
Specifications
| Weighing Load (kg) | 100 |
|---|---|
| Hysteresis | 0.03% F.S |
| Material | Alloy Steel |
| Safe Overload | 150 %FS |
| Rated Output | 2.0 ± 0.005 mV/V |
| Repeatability | ± 0.03 %FS |
| Creep | ± 0.024 %FS/30min |
| Input Resistance | 350 ± 5 Ω |
| Output Resistance | 350 ± 3 Ω |
| Insulation Resistance (MOhm) | ≥5000@ 100Vdc M Ω |
| Length (mm) | 51 |
| Width (mm) | 19 |
| Weight (g) | 609 |
| Shipping Weight | 0.664 kg |
| Shipping Dimensions | 20.5 × 17 × 4 cm |
What's in the box
- 1 x Pull Tension YZC-516C Pressure Sensor 100KG
Frequently Asked Questions
What is the maximum load this load cell can measure?
Can I connect it directly to an Arduino?
What is the wiring colour code?
What driving voltage does it need?
Is mounting hardware included?
What is the IP rating?
Overview
The Generic YZC-516C is an S-type load cell engineered to convert tensile or compressive force into a measurable electrical signal. With a 100kg weighing capacity and an alloy steel body, it suits applications where space is limited but reliable force data is essential. Four strain gauges wired in a Wheatstone bridge produce a 2.0 ± 0.005 mV/V rated output, while hysteresis and repeatability of 0.03% FS help ensure consistent readings across repeated cycles.
Key Features
- Dual-mode sensing: Measures both pull (tension) and pressure (compression) forces up to 100kg.
- Stable output: 2.0 ± 0.005 mV/V rated output with low creep of ±0.024% FS/30min.
- Robust build: Alloy steel construction with IP66 protection for dusty or damp environments.
- Simple wiring: Four leads – red (E+), green (O+), black (E-), white (O-) – connect easily to HX711 modules.
- Mounting ready: Two M4 and two M5 through-holes simplify installation in frames and fixtures.
Specifications Explained
Capacity (100kg): The maximum load the cell is designed to measure. Safe overload is 150% FS, giving a margin for occasional peaks.
Rated output (2.0 mV/V): The signal change per volt of excitation at full load. This standard sensitivity pairs well with common amplifier boards.
Hysteresis and repeatability (0.03% FS): Indicates how closely the sensor returns to the same reading after loading and unloading, important for repeatable measurements.
Input/output resistance (350Ω): Matches typical bridge circuits and ensures compatibility with many signal conditioners.
Insulation resistance (≥5000 MΩ at 100Vdc): Provides electrical isolation for safe operation.
Compatibility and Requirements
The YZC-516C operates with a driving voltage of 5–10V and is commonly paired with HX711 A/D pressure sensor modules for Arduino-based projects. It requires an external amplifier and microcontroller to read the millivolt-level output; no internal electronics are included. Mounting hardware is not supplied, so appropriate M4 and M5 bolts are needed for installation.
Typical Uses
Grouping scales, electronic weighing systems, force measurement in industrial automation, tension monitoring in mechanical assemblies, and DIY projects that need load or strain sensing.
What's in the Box
1 x Pull Tension YZC-516C Pressure Sensor 100KG

Quick specs
- Weighing Load (kg)
- 100
- Hysteresis
- 0.03% F.S
- Material
- Alloy Steel
- Safe Overload
- 150 %FS
- Rated Output
- 2.0 ± 0.005 mV/V
- Repeatability
- ± 0.03 %FS













