Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

The QAWRUMS W800/1 is a passive piezoelectric acoustic emission sensor with a 600 kHz operating frequency and 65 dB sensitivity for structural and machine monitoring. Its IP68 SUS-304 housing lets it work reliably in wet, harsh industrial settings.

Key Highlights

  • 600 kHz resonant frequency with a 50 to 800 kHz usable range
  • 65 dB sensitivity for detecting small acoustic emission events
  • IP68-rated SUS-304 stainless steel housing for harsh environments
  • Integral cable terminated with a BNC output connector
  • Operates from -20 to 120 degrees Celsius
  • Passive piezoelectric design with no built-in preamplifier

Ideal For

  • Acoustic emission researchers running laboratory studies
  • Engineers inspecting composite structures and materials
  • Maintenance teams monitoring rotating machinery
  • Test labs performing frequency analysis
  • Industrial sites needing a waterproof AE sensor

Buying Tip

Confirm that your acquisition system accepts a BNC input and includes an external preamplifier, because the W800/1 has no built-in preamplifier.

Elecvora expert review

Our verdict

The QAWRUMS W800/1 is a well-specified passive AE sensor for high-frequency monitoring, with a rugged IP68 stainless steel body and a wide 50 to 800 kHz range. It suits laboratory and industrial users who already have a preamplifier and BNC-compatible acquisition setup.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • 65 dB sensitivity for weak acoustic events
  • IP68 SUS-304 housing for harsh environments
  • Wide 50 to 800 kHz frequency range
  • BNC output simplifies connection to AE systems
  • Operates from -20 to 120 degrees Celsius

Cons

  • No built-in preamplifier, so external signal conditioning is required
  • BNC interface must match the acquisition hardware
  • Magnetic hold-down and mounting accessories are not listed as included

Best for

Composite inspection, machine monitoring and laboratory acoustic emission studies

Not ideal for

Users needing a self-contained sensor with integrated preamplifier or digital output

Specifications

Resonant / Operating Frequency600 kHz
Sensitivity65 dB
Operating Temperature (°C)-20 to 120
Output Connector TypeBNC on integral cable
Sensor TypePiezoelectric AE Sensor
Built-in PreamplifierNo
ApplicationComposite Structure Inspection and Machine Monitoring and Frequency Analysis and Laboratory Studies
Frequency Range50 - 800 kHz
Model No. / NameW800/1
Case MaterialSUS-304
Protect GradeIP68
Width1.9 cm
Weight (Kg)0.045 kg
Shipping Weight0.103 kg

What's in the box

  • 1 x QAWRUMS W800/1 Piezoelectric AE Sensor

Frequently Asked Questions

Does the W800/1 have a built-in preamplifier?
No. The sensor is passive and requires an external preamplifier in the signal chain before the acquisition system.
What connector does the sensor use?
It uses an integral cable terminated with a BNC output connector, so your acquisition hardware should accept a BNC input.
Can the sensor be used in wet conditions?
Yes. The SUS-304 housing carries an IP68 protection rating, allowing use in wet or dusty industrial environments.
What is the operating temperature range?
The W800/1 is rated to operate from -20 to 120 degrees Celsius.
What is included with the sensor?
The package contains 1 x QAWRUMS W800/1 Piezoelectric AE Sensor.
How is the sensor mounted?
It can be attached with a magnetic hold-down for convenient setup and secure contact during experiments.

Overview

The QAWRUMS W800/1 is a passive piezoelectric acoustic emission sensor designed for high-frequency detection of elastic waves in materials and machinery. It is built around a 600 kHz resonant frequency and covers a usable frequency range of 50 to 800 kHz, so it can capture both lower-frequency structural events and higher-frequency transient signals. Sensitivity is rated at 65 dB, which helps when monitoring small acoustic events such as micro-fractures and crack propagation.

The sensor uses a SUS-304 stainless steel case with IP68 protection and a ceramic sensing interface. This combination supports consistent signal transmission and allows the unit to be used in wet or dusty industrial conditions. An integral cable with a BNC connector provides a direct link to compatible acoustic emission acquisition equipment.

Key Features

  • Wideband passive sensing: piezoelectric element with a 50 to 800 kHz frequency range for varied acoustic emission work.
  • 65 dB sensitivity: suited to detecting low-amplitude transient events in test structures and machines.
  • IP68 housing: SUS-304 stainless steel body resists water and dust ingress in demanding environments.
  • BNC output: integral cable with a BNC connector for straightforward connection to AE systems.
  • Wide temperature range: rated for operation from -20 to 120 degrees Celsius.
  • Compact format: 1.9 cm width and 0.045 kg sensor weight simplify mounting on test pieces.

Specifications Explained

Frequency: The 600 kHz resonant point places the W800/1 in the higher-frequency part of the acoustic emission spectrum, which is useful for detecting fast, small-amplitude events. The 50 to 800 kHz range gives flexibility across different materials and test setups.

Sensitivity: A 65 dB rating indicates the sensor can pick up weak acoustic signals, an advantage when monitoring early-stage damage or subtle machine anomalies.

Construction: The SUS-304 stainless steel case and IP68 rating mean the sensor can be deployed where moisture or dust would affect unprotected units. The ceramic face supports signal transfer into the piezoelectric element.

Output: The integral cable ends in a BNC connector, so the sensor pairs with acquisition hardware that accepts BNC inputs. There is no built-in preamplifier, so an external preamplifier is required in the signal chain.

Compatibility and Requirements

The W800/1 connects through its BNC-terminated integral cable and requires an external preamplifier and acoustic emission acquisition system, since no preamplifier is built in. It is a passive sensor, so no separate power supply is needed at the sensor itself. Mounting can be carried out with a magnetic hold-down for convenient attachment during experiments.

Typical Uses

This sensor is intended for composite structure inspection, machine condition monitoring, frequency analysis and laboratory studies of structural surface displacement under different acoustic emission modes. It can also be used in materials research where high-frequency acoustic activity needs to be recorded.

What's in the Box

1 x QAWRUMS W800/1 Piezoelectric AE Sensor.

Quick specs

Resonant / Operating Frequency
600 kHz
Sensitivity
65 dB
Operating Temperature (°C)
-20 to 120
Output Connector Type
BNC on integral cable
Sensor Type
Piezoelectric AE Sensor
Built-in Preamplifier
No
See all specifications