Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A compact 22.5W charging module with QC4.0, QC3.0 and USB PD support for building custom power banks. Its colour LED screen shows voltage, current and temperature live, so you can monitor each build as it charges.

Key Highlights

  • 22.5W output with QC4.0, QC3.0, USB PD 3.0 and PPS support
  • Colour LED screen displays voltage, current and temperature in real time
  • Three input options: Micro USB, USB Type-C and Lightning
  • Built-in overheat, arc and short-circuit protection
  • Compact 80 x 35 mm board weighing just 18 g
  • Designed for 18650 lithium cells in DIY power bank builds

Ideal For

  • Makers building custom 18650 power banks
  • Electronics hobbyists prototyping portable chargers
  • Repair technicians servicing DIY charging setups
  • Developers testing fast-charge behaviour on the bench
  • Students learning about charging protocols and power modules

Buying Tip

Confirm your enclosure has room for the 80 x 35 mm board plus your 18650 cells, and check whether you need Lightning input before ordering this no-L-interface version.

Elecvora expert review

Our verdict

A tidy, well-featured charging module for DIY power bank projects, with the colour display adding real practical value during testing. It is a component, not a finished product, so buyers should be comfortable with wiring and enclosure work.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Live voltage, current and temperature display
  • Broad protocol support including QC4.0, QC3.0, PD 3.0 and PPS
  • Three input options for flexible build design
  • Compact 80 x 35 mm footprint at 18 g
  • Integrated overheat, arc and short-circuit protection

Cons

  • Requires separate 18650 cells, wiring and enclosure
  • This variant omits the L interface
  • Single USB-A output only

Best for

DIY builders assembling custom 18650 power banks

Not ideal for

Buyers wanting a ready-to-use consumer power bank

Specifications

Model No. / NameCharging Module
Input InterfaceMicro USB / Type-C / Lightning
Output InterfaceUSB-A
DisplayLED Color Screen
CompatibilityMobile Phones, Tablets, DIY Electronics
ProtectionOverheat, Arc, Short-Circuit
Output Power (W)22.5
Length (mm)80
Width (mm)35
Weight (g)18
Shipping Weight0.019 kg
Shipping Dimensions9 × 4 × 2 cm

What's in the box

  • 1 x QC4.0 QC3.0 LED colour display USB PD fast charge 22.5W module (no L interface)

Frequently Asked Questions

What can I power with this module?
It is intended for mobile phones, tablets and DIY electronics, delivering up to 22.5W through its USB-A output.
Which batteries does it use?
The module is designed for 18650 lithium cells, which you need to supply separately along with the wiring and enclosure.
Does this version support Lightning input?
The listing title specifies no L interface, so confirm the variant before ordering if Lightning input matters for your build.
What does the LED display show?
The colour screen reports voltage, current and temperature in real time while the module is in use.
What protections are included?
Overheat, arc and short-circuit protection are built into the module.
Is anything else included in the package?
The package contains the charging module only; batteries, cables and enclosures are not included.

Overview

The Elecvora QC4.0 QC3.0 charging module is a compact power board for anyone building their own portable charger. Rather than buying a sealed consumer power bank, you supply the 18650 cells and enclosure, and this module handles input, output and fast-charging negotiation. It measures 80 mm by 35 mm and weighs 18 g, so it slots into small custom housings without eating usable space.

The board accepts power through Micro USB, USB Type-C or Lightning input and sends it out through a single USB-A port at up to 22.5W. A colour LED display shows voltage, current and temperature as the build runs, which is genuinely useful during testing and everyday use.

Key Features

  • Fast-charge protocol support: QC4.0, QC3.0, USB PD 3.0 and PPS are all handled, so connected devices can negotiate their preferred charging mode.
  • Live colour display: voltage, current and temperature readings are visible on the LED screen at a glance.
  • Three input routes: Micro USB, USB Type-C and Lightning input give flexibility in how the finished build is recharged.
  • Protection circuitry: overheat, arc and short-circuit protection are integrated into the module.
  • DIY-friendly size: the 80 x 35 mm footprint and 18 g weight suit compact enclosures.

Specifications Explained

22.5W output is the module's maximum delivery over USB-A. It is enough for fast charging on compatible phones and tablets, though the actual rate depends on what the connected device requests and on the cells you install.

QC4.0, QC3.0, PD 3.0 and PPS are the charging protocols the module can negotiate. In practice, this means a wider range of modern devices can draw power at their preferred level instead of falling back to slow standard charging.

The LED colour screen turns the module into a small diagnostic tool. Watching voltage and current while a device charges helps you confirm the build is working correctly and spot unusual behaviour early. Temperature readout is useful when testing under load.

18650 cell support defines the battery type the module is intended for. Plan your enclosure and wiring around these cells.

Compatibility and Requirements

The module is listed as compatible with mobile phones, tablets and DIY electronics. Input can come from Micro USB, Type-C or Lightning sources; note that this version is the no-L-interface variant, so check the listing title carefully before ordering if Lightning input is essential to your design. Output is USB-A only. You will need to supply your own 18650 cells, wiring and enclosure, since the module is a component rather than a finished product.

Typical Uses

  • Custom 18650 power bank builds
  • Maker and prototype projects needing a regulated fast-charge output
  • Repair or upgrade work on existing DIY charging setups
  • Bench testing where live voltage, current and temperature readings help

What's in the Box

1 x QC4.0 QC3.0 LED colour display USB PD fast charge 22.5W module (no L interface). Batteries, cables and enclosures are not included.

Quick specs

Model No. / Name
Charging Module
Input Interface
Micro USB / Type-C / Lightning
Output Interface
USB-A
Display
LED Color Screen
Compatibility
Mobile Phones, Tablets, DIY Electronics
Protection
Overheat, Arc, Short-Circuit
See all specifications