Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A black QS SA50 multipole power connector rated under 50A for 6-12AWG wire, with PC insulation and UL94 V-0 flammability. It gives drone and battery builds a compact, heat-tolerant power connection with published electrical ratings.

Key Highlights

  • Rated for currents under 50A on main power leads
  • Accepts 6-12AWG wire for flexible build options
  • PC insulation with UL94 V-0 flammability rating
  • Operates from -20 to 105 °C in tight enclosures
  • 2200V AC withstanding voltage and 5000 MOhm insulation resistance
  • Compact black multipole body for drone and battery wiring

Ideal For

  • Drone builders wiring main battery leads
  • RC hobbyists rebuilding power harnesses
  • FPV pilots working on mid-size multirotor power paths
  • Makers assembling compact battery distribution setups
  • Technicians replacing worn power connectors

Buying Tip

Confirm your wire gauge falls within 6-12AWG and your expected current stays under 50A before soldering this connector into a power path.

Elecvora expert review

Our verdict

A sensible mid-range power connector with published electrical and material data, which makes it easy to spec into a build. It suits under-50A leads and 6-12AWG wire rather than high-current setups.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Clear under-50A current rating
  • Wide 6-12AWG wire support
  • UL94 V-0 PC insulation
  • Published withstanding voltage and insulation resistance
  • Compact black body

Cons

  • Package contents not specified
  • Requires soldering and heat-shrink
  • Not intended for loads above 50A

Best for

Mid-size drone and RC power leads under 50A

Not ideal for

High-current builds above the 50A rating

Specifications

Model No. / NameSA50H-B.2T
Insulation MaterialPC
Operating Temperature (°C)-20 to 105
Current (A)<50
Recommended Wire06-12AWG
FlammabilityUL94 V-0
Withstanding voltage2200 Volts AC
Insulation Resistance (MOhm)5000
Shipping Weight0.023 kg
Shipping Dimensions12 × 10 × 4 cm

Frequently Asked Questions

What current can this connector handle?
It is rated for currents under 50A. Keep your expected load below that figure and choose wire to match.
Which wire sizes fit?
The connector accepts 6-12AWG wire. Pick a gauge that suits your load and fits the body cleanly.
What is the operating temperature range?
The rated range is -20 to 105 °C, with PC insulation rated UL94 V-0 for flammability.
What do the voltage and resistance figures mean?
The withstanding voltage is 2200V AC and insulation resistance is 5000 MOhm, which describe dielectric performance.
Is a mating connector included?
Package contents are not specified for this listing. Check the product options and quantity before ordering.
How should I care for the connector?
Keep solder joints short and insulated, avoid overheating the PC body, and inspect the connection after crashes or heavy use.

Overview

The QS SA50H-B.2T is a black multipole power connector from the QS drone and battery connector range. It is designed for the main power path in RC and drone builds, where a compact body, predictable dielectric behaviour and a defined current ceiling all matter. The part carries published material and electrical data, so you can check it against your build before soldering.

Key Features

  • Under 50A rating for main power leads on mid-size models.
  • 6-12AWG wire range covering common battery and ESC gauges.
  • PC insulation with a UL94 V-0 flammability rating.
  • -20 to 105 °C operating temperature window.
  • 2200V AC withstanding voltage and 5000 MOhm insulation resistance.
  • Black multipole body that is easy to label and route.

Specifications Explained

Current and wire gauge

The connector is rated for currents under 50A and accepts 6-12AWG wire. In practice, that means it fits the battery-to-ESC and distribution leads found on many mid-size multirotors and RC models. Choose the wire gauge to suit your expected load, and keep in mind that the connector rating is a ceiling, not a target.

Insulation and heat

The PC insulation carries a UL94 V-0 flammability rating, and the connector is rated to operate between -20 and 105 °C. That range covers cold-morning field sessions as well as warm packs and enclosed airframes, provided airflow and soldering are handled properly.

Dielectric performance

A 2200V AC withstanding voltage and 5000 MOhm insulation resistance describe how the part handles voltage stress and leakage. These figures are useful when you are comparing connectors for a power path where isolation quality matters.

Compatibility and Requirements

Use wire within the 6-12AWG range and keep current below the 50A rating. The connector is a solder-style power part, so you will need soldering tools, heat-shrink tubing and a way to secure the leads inside your airframe. Match the connector to your battery and ESC leads before assembly.

Typical Uses

Main power connections on mid-size drones and RC models, battery harnesses, power distribution leads and repair or rebuild jobs where a compact multipole connector with published ratings is preferred.

What's in the Box

Package contents are not specified for this listing. Check the product options and quantity before ordering if you need a matched pair.

Quick specs

Model No. / Name
SA50H-B.2T
Insulation Material
PC
Operating Temperature (°C)
-20 to 105
Current (A)
<50
Recommended Wire
06-12AWG
Flammability
UL94 V-0
See all specifications