Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A lightweight 4-channel flight controller for fixed-wing aircraft with six flight modes and a built-in six-axis gyroscope. It supports SBUS and PPM receivers and runs on a 5V BEC supply, making stabilised fixed-wing setups simple to build.

Key Highlights

  • Four output channels for aileron, elevator, throttle and rudder
  • Six flight modes, from manual control to self-stabilisation and stunt
  • Works with SBUS and PPM receivers
  • Built-in six-axis gyroscope for flight stability
  • Pre-tuned PID settings for reliable out-of-the-box behaviour
  • Weighs only 4.5 g for minimal impact on aircraft balance

Ideal For

  • Pilots building a four-channel fixed-wing trainer
  • 3D fixed-wing and F3P-style aerobatic flyers
  • Hobbyists converting conventional fixed-wing models to stabilised flight
  • Beginners who want gyro assistance while learning to fly
  • Pilots using SBUS or PPM radio systems

Buying Tip

Check that your receiver outputs SBUS or PPM and that your model can supply a 5V BEC feed before ordering, then complete the first-time calibration before your maiden flight.

Elecvora expert review

Our verdict

The Byme-A is a sensible, low-weight flight controller for fixed-wing pilots who want gyro stabilisation and multiple flight modes without deep tuning. Its SBUS and PPM support and pre-tuned setup make it easy to integrate into typical four-channel models.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Very light at 4.5 g
  • Six flight modes cover beginner to sport flying
  • Pre-tuned PID settings reduce setup work
  • Accepts both SBUS and PPM receivers
  • Simple four-channel layout for standard fixed-wing models

Cons

  • Requires a 5V BEC supply, which is not included
  • Only four output channels, so no extra functions
  • No dimensions or detailed wiring documentation given in the listing

Best for

Fixed-wing pilots who want lightweight stabilisation with selectable flight modes

Not ideal for

Multi-rotor or complex models needing more than four output channels

Specifications

Item TypeFlight Controller
Model No. / NameByme A
Output channel4
Flight Modes6
CompatibilitySupports SBUS and PPM receivers
Power Supply Voltage (V)5
Weight (g)4.5
Shipping Weight0.008 kg
Shipping Dimensions14 × 9 × 1 cm

What's in the box

  • 1 x Radiolink Byme-A Flight Controller

Frequently Asked Questions

What types of aircraft is the Byme-A designed for?
It is intended for fixed-wing aircraft, including four-channel trainer planes, 3D fixed-wing models and conventional fixed-wing builds.
Which receivers does it support?
The controller works with both SBUS and PPM receivers.
What power supply does it need?
It runs on a 5V supply, typically provided by a BEC in the aircraft.
How many output channels does it have?
It provides four output channels for aileron, elevator, throttle and rudder.
Do I need to tune PID settings?
No complex parameter adjustment is required because the PID settings are pre-tuned, but a first-time calibration should be completed.
What is included in the package?
The package contains one Radiolink Byme-A Flight Controller.

Overview

The Radiolink Byme-A is a flight controller designed for fixed-wing aircraft. It brings together a four-channel output layout, six selectable flight modes and a six-axis gyroscope in a board that weighs just 4.5 g. The aim is straightforward: give fixed-wing pilots dependable stabilisation and mode flexibility without a long tuning process. Pre-tuned PID settings and a simple first-time calibration mean the controller is ready for flight with minimal adjustment, which suits both newcomers and pilots who prefer to spend their time flying rather than configuring.

Key Features

  • Four output channels: aileron, elevator, throttle and rudder outputs cover the standard control surfaces of a fixed-wing model.
  • Six flight modes: choose between Crane Mode with multi-axis logic, Crane Mode with fixed-wing logic, self-stabilisation, stunt, stabilisation and manual modes.
  • Receiver flexibility: accepts both SBUS and PPM receivers, so you can use the radio protocol you already have.
  • Gyro stability aid: the integrated six-axis gyroscope helps keep the aircraft steady in stabilised modes.
  • Status indicators: onboard lights give real-time feedback on the controller state.
  • Lightweight build: at 4.5 g, it adds very little mass to the airframe.

Specifications Explained

The four output channels map to the classic fixed-wing control set, so the controller fits conventional models without extra channel expansion. Six flight modes give you a clear progression: manual mode for full pilot control, stabilisation and self-stabilisation modes for assisted flight, stunt mode for aerobatic input, and the two Crane Mode options for different stabilisation logic approaches. The six-axis gyroscope is the core of the stability assistance, and the pre-tuned PID settings mean the correction behaviour is already configured. Power comes from a 5V BEC supply, which is a common arrangement on fixed-wing builds. At 4.5 g, the controller is light enough that it should not noticeably affect centre of gravity.

Compatibility and Requirements

The Byme-A supports SBUS and PPM receivers. It requires a 5V power supply, typically provided through a BEC. Because the controller relies on pre-tuned PID settings, no complex parameter adjustment is needed, but a first-time calibration should be completed before flying. Confirm your receiver output protocol and your model's control surface layout before installation.

Typical Uses

This controller suits four-channel trainer aircraft, 3D fixed-wing models such as F3P-style planes, and conventional fixed-wing builds. Beginners can use the stabilised modes while learning, and more experienced pilots can switch to manual or stunt modes for sport flying.

What's in the Box

The package contains one Radiolink Byme-A Flight Controller.

Quick specs

Item Type
Flight Controller
Model No. / Name
Byme A
Output channel
4
Flight Modes
6
Compatibility
Supports SBUS and PPM receivers
Power Supply Voltage (V)
5
See all specifications