
1 / 4 · Click to enlarge
AI Summary
A compact 2.4 GHz radio controller with EdgeTX preinstalled, hall effect gimbals and a foldable antenna. It runs on 18650 batteries and fits a nano module bay for flexible FPV setups.
Key Highlights
- Preinstalled EdgeTX firmware ready for setup
- Hall effect gimbals for smooth, precise centring
- Foldable antenna and removable stick ends for travel
- Backlit 128x64 monochrome LCD for field visibility
- Nano module bay supports compatible RadioMaster and TBS modules
- Runs on 18650 batteries with 6.6-8.4 VDC operating voltage
Ideal For
- FPV pilots who want a compact travel radio
- Pilots flying small quads and park flyers
- Hobbyists needing a lightweight backup transmitter
- Users who prefer EdgeTX firmware out of the box
- Makers building a portable FPV field kit
Buying Tip
Check that your receiver matches the CC2500 module version and remember to order 18650 batteries separately, since none are included.
Elecvora expert review
Our verdict
The Pocket CC2500 packs EdgeTX, hall gimbals and a nano module bay into a genuinely portable body. It is a sensible choice for pilots who value travel convenience over a full-size radio layout.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- EdgeTX preinstalled saves setup time
- Hall effect gimbals give smooth stick feel
- Foldable antenna and removable sticks aid transport
- Nano bay supports RadioMaster and TBS modules
- Light 288 g body with backlit LCD
Cons
- 18650 batteries are not included
- Protocol depends on the installed module
- Compact size may not suit pilots who prefer large radios
Best for
FPV pilots who need a small, capable travel transmitter
Not ideal for
Pilots wanting a full-size radio chassis with included batteries
Specifications
| Item Type | Controller |
|---|---|
| Frequency (GHz) | 2.4 |
| Display | 128*64 Monochrome LCD |
| Protocol | Module dependent |
| Operating Voltage (VDC) | 6.6-8.4 |
| Weight (g) | 288 |
| Shipping Weight | 0.53 kg |
| Shipping Dimensions | 22 × 16 × 9 cm |
What's in the box
- 1 x Pocket Radio
- 1 x Custom Carry Pouch
- 1 x USB-C Cable
- 1 x Screen Protector
- 1 x Sticker
- 4 x Low Tension Springs
- 1 x Manual
Frequently Asked Questions
Does the Radiomaster Pocket include batteries?
What firmware comes installed?
Which modules fit the module bay?
What is in the box?
Can I change the stick feel?
How do I transport it safely?
Overview
The Radiomaster Pocket CC2500 is a small-format 2.4 GHz radio controller designed for pilots who need a capable transmitter that travels easily. It ships with EdgeTX firmware already installed, so you can move straight into model setup rather than flashing firmware first. The transparent case gives it a clean, technical look, and optional colour cases let you change the styling later.
At 288 g, the Pocket is light enough to carry in a backpack alongside goggles and a quad. The antenna folds down and the stick ends can be removed, which reduces its footprint for storage and transport.
Key Features
- EdgeTX preinstalled: start configuring models and mixes without an initial firmware install.
- Hall effect gimbals: smooth centring and precise stick response as standard.
- Backlit monochrome LCD: a 128x64 display balancing readability with a compact body.
- LED switch indicators: built-in lights help you see the positions of switches SA and SD.
- Trim buttons: straightforward channel trimming during setup.
- Nano module bay: compatible with RadioMaster nano-size modules and TBS Nano Crossfire or Nano Tracer 2.
Specifications Explained
The 2.4 GHz frequency band is the operating band for this controller, and the protocol used depends on the module installed in the bay. The 128x64 monochrome LCD is backlit, so menus and model data remain readable in dim conditions. Operating voltage is listed at 6.6-8.4 VDC, matching the 18650 battery format the radio is designed to use. Batteries are not included, so plan your power source before first use.
The folded size is 156.6 x 65.1 x 125.3 mm, expanding to 156.6 x 73.1 x 154.8 mm with the antenna and sticks extended. At 288 g, it is easy to hold for longer sessions and simple to stow.
Compatibility and Requirements
The module bay is nano size and accepts RadioMaster Nano-size modules as well as TBS Nano Crossfire and Nano Tracer 2. Because protocol is module dependent, confirm your chosen module matches your receiver before flying. The radio requires 18650 batteries, which are not supplied.
Typical Uses
The Pocket suits FPV pilots flying small quads, fixed-wing fliers who want a compact backup radio, and hobbyists building a lightweight travel kit. The foldable antenna and removable sticks make it practical for throwing into a bag for park sessions or trips.
What's in the Box
- 1 x Pocket Radio
- 1 x Custom Carry Pouch
- 1 x USB-C Cable
- 1 x Screen Protector
- 1 x Sticker
- 4 x Low Tension Springs
- 1 x Manual

Quick specs
- Item Type
- Controller
- Frequency (GHz)
- 2.4
- Display
- 128*64 Monochrome LCD
- Protocol
- Module dependent
- Operating Voltage (VDC)
- 6.6-8.4
- Weight (g)
- 288
















