Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

The RC-112E is a compact 24V digital LCD thermostat controller with a 10A relay and a 2-metre temperature probe. It lets you set and read temperatures in 0.1 steps and switch heating or cooling equipment automatically.

Key Highlights

  • Clear LCD display shows temperature values for easy reading
  • Single relay rated at 10A for switching heating or cooling loads
  • 0.1 temperature resolution with 1 degree accuracy
  • 2-metre probe cable allows remote sensing away from the panel
  • Heat and cool modes with delay protection and calibration
  • Compact 77 x 61 mm grey housing for panel or dashboard mounting

Ideal For

  • Home users controlling freezer or refrigerator temperatures
  • Greenhouse and aquarium keepers managing heat or cooling
  • Farm operators monitoring water tanks and cold storage
  • Technicians servicing chillers and industrial equipment
  • Hobbyists building temperature-controlled enclosures

Buying Tip

Check that your supply is 24V and that the device you want to switch stays within the 10A relay rating before ordering.

Elecvora expert review

Our verdict

The RC-112E is a straightforward 24V thermostat controller with a readable LCD, a 10A relay and a long probe cable, which covers many everyday heating and cooling jobs. It suits users who want simple temperature switching without extra complexity.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Clear LCD display with 0.1 resolution
  • 10A relay handles a range of small heating and cooling loads
  • 2-metre probe cable allows remote temperature sensing
  • Heat and cool modes plus delay protection and calibration

Cons

  • Requires a separate 24V supply
  • Single relay limits it to one controlled device
  • Humidity must stay below 90% with no condensation

Best for

Simple heating or cooling control in fridges, tanks, greenhouses and small equipment

Not ideal for

High-power loads above the 10A relay rating or wet, condensing locations

Specifications

Voltage Rating24
Model No. / NameRC 112E
Resolution0.1
Accuracy1
Recommended Power Supply220VAC/24V, 50/60HZ
Max. Operating Current (A)one relay 10A
Operating Temperature (°C)-10 ~ 60
Operating humidityRH<90% no condensation
Power Consumption (W)≤3
Length (mm)77
Width (mm)61
Weight (g)164
ColorGrey
Shipping Weight0.12 kg
Shipping Dimensions9 × 8 × 3 cm

What's in the box

  • 1 x RC-112E 24V 10A Digital LCD Thermostat Regulator Temperature Controller
  • 1 x Temperature Probe with 2-Meter cable
  • 1 x User Manual

Frequently Asked Questions

What supply voltage does the RC-112E need?
It is rated for 24V operation, with a recommended supply of 220VAC/24V at 50/60Hz. Use a supply that matches this specification.
Can it control both heating and cooling devices?
Yes, the controller offers heat and cool modes, so it can switch either type of equipment depending on the mode you select.
How much load can the relay handle?
The single relay is rated at a maximum operating current of 10A. Keep the connected device within that rating.
What is included with the controller?
The package contains the RC-112E controller, a temperature probe with a 2-metre cable, and a user manual.
What temperature range can it measure?
The operating temperature range is -10 to 60°C, with 0.1 resolution and 1 degree accuracy.
Where should I install it?
Mount it in a dry location where humidity stays below 90% without condensation, and keep the probe positioned at the point you want to control.

Overview

The RC-112E is a digital thermostat regulator designed to keep a chosen temperature range under control. A large LCD panel shows the measured temperature clearly, and the unit switches its relay output to drive heating or cooling equipment. It is a practical choice where a simple, readable controller is preferred over a complicated system.

The controller operates from a 24V supply and uses one relay rated at 10A. A temperature probe on a 2-metre cable lets you place the sensor where the temperature actually matters, while the display stays where you can see it. The grey housing measures 77 mm by 61 mm and weighs 164 g.

Key Features

  • LCD display: shows temperature values clearly for quick checks.
  • 0.1 resolution: readings step in tenths of a degree.
  • 10A relay output: one relay for switching connected heating or cooling devices.
  • Heat and cool modes: suits both warming and refrigeration applications.
  • Delay protection: helps protect connected equipment during switching cycles.
  • Temperature calibration: allows the reading to be adjusted to match a reference.
  • 2-metre probe cable: keeps the sensor remote from the controller.

Specifications Explained

Voltage and power: the unit is rated for 24V operation, with a recommended supply of 220VAC/24V at 50/60Hz. Power consumption is listed at 3W or less, so it adds little load to a supply.

Relay capacity: the single relay is rated at 10A maximum operating current. Match your connected load to this rating and use suitable switching where needed.

Measurement: resolution is 0.1 and accuracy is 1 degree. The operating range is -10 to 60°C, covering chilled storage, tanks and many indoor growing spaces.

Environment: operating humidity should stay below 90% RH with no condensation. Keep the housing away from dripping water and damp surfaces.

Compatibility and Requirements

The RC-112E requires a 24V supply as described in the product data. It switches one relay output, so plan for a single heating or cooling device per controller. The supplied probe cable is 2 metres long; consider the distance between the controller and the sensing point before mounting. Installation and connection details are covered in the included user manual.

Typical Uses

Common applications include domestic freezers, refrigerators, water tanks, industrial chillers, steamers, greenhouses, aquariums, farm temperature control and various cold storage rooms. The heat and cool modes make it adaptable to both warming and cooling duties.

What's in the Box

  • 1 x RC-112E 24V 10A digital LCD thermostat regulator
  • 1 x temperature probe with 2-metre cable
  • 1 x user manual

Quick specs

Voltage Rating
24
Model No. / Name
RC 112E
Resolution
0.1
Accuracy
1
Recommended Power Supply
220VAC/24V, 50/60HZ
Max. Operating Current (A)
one relay 10A
See all specifications