
1 / 3 · Click to enlarge
AI Summary
A compact 125KHz RFID reader module that reads EM4100-compatible cards at 20–50mm and outputs card data over UART at 9600 bps. It runs on 5V DC with under 50mA current draw, making it easy to power from common project boards.
Key Highlights
- 125KHz operating frequency for EM4100-compatible RFID cards
- Stable read distance of 0.02 to 0.05 metres
- UART output at 9600 bps with TTL-level RS232 signalling
- Low current draw of under 50mA at 5V DC
- Compact 40 x 20mm board weighing about 8g
- Ships with a connecting cable for quick wiring
Ideal For
- Makers building a first RFID access control project
- Students learning how 125KHz card reading works
- Engineers adding tap-to-identify to a kiosk or panel
- Hobbyists prototyping attendance or logging devices
- Developers integrating card reading into a smart charging station
Buying Tip
Check that your project can supply a regulated 5V rail and accept UART data at 9600 bps before wiring the module in, since it does not include a USB or level-shifting interface.
Elecvora expert review
Our verdict
The RD6300 is a simple, low-power 125KHz reader that does one job well: reading EM4100-compatible cards at close range and sending the data over UART. It is a sensible, low-cost building block for identification projects where space and current are limited.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Reads EM4100-compatible cards at 125KHz
- Low current draw of under 50mA at 5V
- Compact 40 x 20mm board with a connecting cable included
- Standard 9600 bps UART output that is easy to interface
Cons
- Short 20–50mm read range requires close card presentation
- No USB or level-shifting interface, so a host controller is required
- Cards and power supply are not included
Best for
Makers and engineers adding close-range 125KHz card reading to a microcontroller project
Not ideal for
Users wanting long-range reading or a plug-and-play USB card reader
Specifications
| Item Type | RFID Module |
|---|---|
| Model No. / Name | RD6300 |
| Reading distance | 0.02–0.05 m |
| Baud Rate (bps) | 9600 |
| Operating Voltage (V) | DC 5 |
| Data Transfer Rate | 0.02m–0.05m |
| Operating Current (mA) | <50 |
| Operating Frequency (KHz) | 125 |
| Length (mm) | 40 |
| Width (mm) | 20 |
| Weight (g) | 08 |
| Shipping Weight | 0.02 kg |
| Shipping Dimensions | 10 × 6 × 2 cm |
What's in the box
- 1 x RD6300 card reader module
- 1 x Connecting cable
Frequently Asked Questions
What cards does the RD6300 read?
How close does the card need to be?
What power supply does it need?
How does the module send card data?
What is included with the module?
How should I care for the module?
Overview
The RD6300 is a compact RFID reader module for contactless identification at 125KHz. It reads EM4100-compatible cards and transmits the card data over a UART connection at 9600 bps, using TTL-level RS232 signalling. Because it runs from a 5V DC supply and draws under 50mA, it can share power with many common microcontroller boards and small devices.
The board measures roughly 40 x 20mm and weighs about 8g, so it fits into tight enclosures, control panels and handheld builds. It is a practical choice for makers, students and engineers who want to add card reading to a project without a large module or a complex power setup.
Key Features
- 125KHz reading frequency for EM4100-compatible RFID cards
- 20–50mm read range for close-proximity identification
- UART output at 9600 bps with TTL-level RS232 format
- 5V DC operation with current draw under 50mA
- Small footprint of about 40 x 20mm and 8g weight
- Connecting cable included for straightforward wiring
Specifications Explained
Reading distance (0.02–0.05m): the card needs to be held close to the module, typically within a couple of centimetres. This suits tap-style or swipe-style interaction rather than long-range reading.
Baud rate (9600 bps): the serial link runs at a common, well-supported speed, so most microcontrollers can receive the data without special configuration.
Operating voltage (5V DC) and current (under 50mA): the module is easy to power from a 5V rail and will not place a heavy load on a small supply.
Operating frequency (125KHz): this is the low-frequency RFID band used by EM4100-compatible cards, which are widely available for access and ID projects.
Dimensions and weight (40 x 20mm, 8g): the board is small and light enough to mount inside compact housings or on a panel.
Compatibility and Requirements
The module is designed for EM4100-compatible 125KHz RFID cards. It needs a 5V DC power source and a host device that can receive UART data at 9600 bps over a TTL-level RS232 connection. A connecting cable is supplied, but the host controller, power supply and cards are not included.
Typical Uses
- Access control and door entry projects
- Attendance tracking and time logging
- Anti-theft and security setups
- Smart charging stations and kiosks
- Learning and prototyping RFID identification
What's in the Box
- 1 x RD6300 card reader module
- 1 x Connecting cable
Quick specs
- Item Type
- RFID Module
- Model No. / Name
- RD6300
- Reading distance
- 0.02–0.05 m
- Baud Rate (bps)
- 9600
- Operating Voltage (V)
- DC 5
- Data Transfer Rate
- 0.02m–0.05m













