Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A 5A PWM relay switch that lets you control lights or auxiliary gear from a spare RC channel. Safe-protection mode and LED status make setup straightforward.

Key Highlights

  • 5A MOSFET switch controlled by PWM signal from your RC receiver
  • Wide pulse range: 400 to 2600us for flexible compatibility
  • Safe-protection mode prevents unexpected activation at power-up or signal loss
  • LED indicates switch state and fast-blinks during protection mode
  • Compact and lightweight for easy installation in tight builds
  • Ideal for switching lights, sound modules, and other auxiliary items

Ideal For

  • FPV pilots adding LED lights to their quads
  • RC car and truck builders controlling auxiliary accessories
  • Robotics hobbyists needing remote switching
  • Drone operators using a spare channel for payload control
  • DIY electronics enthusiasts building remote on/off projects

Buying Tip

Check that your receiver provides a 5V supply and that your transmitter has at least one free auxiliary channel before ordering.

Elecvora expert review

Our verdict

A straightforward and reliable solution for adding remote switching to RC models, with useful safety features that prevent accidental activation. It is best suited to users who understand PWM signals and have a spare channel available.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Simple PWM control from any spare channel
  • Safe-protection mode reduces risk of unexpected activation
  • LED provides clear status feedback
  • Compact and lightweight

Cons

  • Requires a 5V receiver supply and at least 3 channels
  • Load must not exceed 5A
  • No physical mounting holes or case

Best for

RC hobbyists needing a compact relay switch for lights or small accessories

Not ideal for

Users with receivers that cannot supply 5V or transmitters with fewer than 3 channels

Specifications

Item TypeRelay Switch
Lead Length (mm)100m
Shipping Weight0.01 kg
Shipping Dimensions10 × 7 × 1 cm

What's in the box

  • 1 x 5A RC TX Controlled Relay Switch PWM Receiver

Frequently Asked Questions

What is the maximum load this switch can handle?
The module is rated for up to 5A. Ensure your connected device does not draw more than this to avoid damage.
Can I use this with any RC receiver?
It works with receivers that output standard PWM signals between 400 and 2600us and can supply 5V to the module. Your transmitter must have at least three channels.
Why does the LED blink rapidly?
Fast blinking indicates safe-protection mode is active, usually because the input pulse was above 1800us at power-up or the signal was lost for 500ms. Cycle the switch to off and ensure a good signal.
What voltage does the module require?
It requires a 5V supply from the receiver. Voltages above 5V will prevent proper operation.
What is included in the package?
The package includes one 5A RC TX Controlled Relay Switch PWM Receiver.
Can I use this to control a spray pump?
Yes, as long as the pump draws no more than 5A and operates within the voltage supplied by your setup. The module is commonly used for spray switches.

Overview

The ReadytoSky 5A RC TX Controlled Relay Switch is a small but capable module that adds remote switching to your RC projects. It connects to a spare auxiliary channel on your receiver and reads the PWM pulse width to decide when to open or close its MOSFET switch. Whether you want to turn on navigation lights, a buzzer, or a spray mechanism, this module gives you a simple way to control auxiliary electronics from your transmitter.

Key Features

  • PWM-controlled switching: Activates when the pulse width exceeds 1800us and deactivates below 1200us.
  • Safe-protection mode: If the input pulse is above 1800us at first power-up, or if the signal is lost for 500ms, the switch stays open and the LED fast-blinks until the signal is corrected.
  • LED status indicator: Solid on when the switch is active, off when inactive, and fast-blinking in protection mode.
  • Compact design: Lightweight and easy to tuck into tight spaces on drones, cars, or bots.

Specifications Explained

5A rating: The module can handle loads up to 5A, making it suitable for many LED strips, small pumps, and other low-to-moderate current accessories. Always check that your load does not exceed this rating.

Pulse width range 400–2600us: This wide range means the module can interpret signals from most standard RC systems. The switch turns on when the pulse is above 1800us and off when below 1200us, giving a clear threshold for reliable operation.

Safe-protection logic: The module monitors the signal continuously. If the signal is lost for 500ms, it opens the switch and blinks the LED, helping prevent unexpected activation. Once a valid signal returns, normal operation resumes.

Compatibility and Requirements

This relay switch requires a 5V power supply from your receiver. Do not exceed 5V, as higher voltages will prevent proper operation. Your transmitter and receiver must provide at least three channels so you can dedicate one auxiliary channel to the switch. The module works with standard PWM signals in the 400–2600us range.

Typical Uses

Use it to switch on LED light strips for night flying, trigger a sound module, operate a small spray pump, or control any other auxiliary electrical item that draws up to 5A. It is a popular choice for FPV pilots, RC car builders, and robotics hobbyists who need remote on/off control without adding complex wiring.

What's in the Box

Package includes: 1 x 5A RC TX Controlled Relay Switch PWM Receiver.

Quick specs

Item Type
Relay Switch
Lead Length (mm)
100m
Shipping Weight
0.01 kg
Shipping Dimensions
10 × 7 × 1 cm
See all specifications